Faster Fusion Soft Jaws Mechanical Advantage 2025-04-08 | This video will cover how you can set up a vise to be able to create soft jaw cavities far more quickly. These videos provide more in depth methods for creating the cavity in the soft jawyoutu.be/LYf-upgpppk?si=GXcdSV_yheuJSuMb (sketch cut method)youtu.be/l7tn5PHaNag?si=2ZQVW-R3rXdSkzF2 (combine cut method)Training Class Schedule:www.mechanicaladvantage.com/trainingPurchase Support:www.mechanicaladvantage.com/trainingHave a project you need help on? Contact me at info@mechanicaladvantage.com
Fusion Stock Transfer Mechanical Advantage 2024-12-21 | This video will demonstrate how to transfer stock from one setup to the next. This method will work using vises, fixture plates, as well as other work holding methods. Have a project you need help on? Contact me at www.mechanicaladvantage.com/schedule-now#Fusion #FusionCAM #AutodeskCAM #Autodesk #MakeAnything
Fusion Update - Manufacturing Heights Mechanical Advantage 2024-07-15 | In the latest release of Fusion, you will find some changes that have been made on the heights tab. This video will show you what those changers are and how to use them.
Model Engine Project - Engine Case LH Mechanical Advantage 2024-02-05 | This is the 3D modeling process for the third component of a series that will show modeling, toolpathing, and machining the different components that make up a model engine. You can find project page for this component here:autodesk.com/learn/ondemand/module/model-engine-project-7-engine-case-leftHave a project you need help on? Contact me at www.mechanicaladvantage.com/schedule-now
Model Engine Project - Cylinder Head Machining Mechanical Advantage 2024-01-27 | This video will cover running the toolpaths created in previous videos to machine the Cylinder Head complete, which is part of a Model Engine assembly. You can find project page for this component here:autodesk.com/learn/ondemand/module/model-engine-project-8-cylinder-headOneDrive Link for tool library for projectmechanicaladvantage-my.sharepoint.com/:u:/p/kevin/EYJBa8gxWuxKmhqGdWE2v_0BdJ_MIhRMC1ylIfuH6gbUBA?e=CctNNcTraining Class Schedule, use TRAIN25 at checkoutwww.mechanicaladvantage.com/trainingPurchase Support, use SUPPORT25 at checkoutwww.mechanicaladvantage.com/trainingHave a project you need help on? Contact me at www.mechanicaladvantage.com/schedule-now
Model Engine Project - Cylinder Head CAM Mechanical Advantage 2024-01-24 | This video will cover creating the setups and toolpaths needed to machine the Cylinder Head, which is part of a Model Engine assembly. You can find project page for this component here:autodesk.com/learn/ondemand/module/model-engine-project-8-cylinder-headOneDrive Link for tool library for projectmechanicaladvantage-my.sharepoint.com/:u:/p/kevin/EYJBa8gxWuxKmhqGdWE2v_0BdJ_MIhRMC1ylIfuH6gbUBA?e=CctNNcTraining Class Schedule, use TRAIN25 at checkoutwww.mechanicaladvantage.com/trainingPurchase Support, use SUPPORT25 at checkoutwww.mechanicaladvantage.com/trainingHave a project you need help on? Contact me at www.mechanicaladvantage.com/schedule-now
Model Engine Project - Cylinder Head Mechanical Advantage 2024-01-22 | This is the 3D modeling process for the second component of a series that will show modeling, toolpath, and machining the different components that make up a model engine. You can find project page for this component here:autodesk.com/learn/ondemand/module/model-engine-project-8-cylinder-headTraining Class Schedule, use TRAIN25 at checkoutwww.mechanicaladvantage.com/trainingPurchase Support, use SUPPORT25 at checkoutwww.mechanicaladvantage.com/trainingHave a project you need help on? Contact me at www.mechanicaladvantage.com/schedule-now
Model Engine Project - Cylinder Machining Mechanical Advantage 2024-01-20 | This video will show the machining process for the cylinder component used in the Autodesk Model Engine project. In the previous two videos of this series, I modeled the part and then added the required toolpaths in CAM. This video will show the finished product made on the Syil X7. autodesk.com/learn/ondemand/module/model-engine-project-1-cylinder
Model Engine Project - Cylinder CAM Mechanical Advantage 2024-01-10 | This video will cover creating the setups and toolpaths needed to machine the Cylinder, which is part of a Model Engine assembly. You can find project page for this component here:autodesk.com/certification/learn/module/model-engine-project-1-cylinder/5MS6qHZj9GiyJqF4ZKCNkUOneDrive Link Link for tool library for projectmechanicaladvantage-my.sharepoint.com/:u:/p/kevin/EYJBa8gxWuxKmhqGdWE2v_0BdJ_MIhRMC1ylIfuH6gbUBA?e=CctNNcTraining Class Schedule, use TRAIN25 at checkoutwww.mechanicaladvantage.com/trainingPurchase Support, use SUPPORT25 at checkoutwww.mechanicaladvantage.com/trainingHave a project you need help on? Contact me at www.mechanicaladvantage.com/schedule-now
Model Engine Project - Cylinder Mechanical Advantage 2024-01-08 | This is the first video of a series that will show modeling, toolpath, and machining the different components that make up a model engine. You can find project page for this component here:autodesk.com/learn/ondemand/module/model-engine-project-1-cylinderTraining Class Schedule, use TRAIN25 at checkoutwww.mechanicaladvantage.com/trainingPurchase Support, use SUPPORT25 at checkoutwww.mechanicaladvantage.com/trainingHave a project you need help on? Contact me at www.mechanicaladvantage.com/schedule-now
Fusion 360 5 Axis Sweetness #shorts Mechanical Advantage 2023-06-22 | Here is a great video from @fieldmarshalltaggart (instagram) who solely used Fusion 360 to machine this part. Check out this amazing 5 axis toolpath using a lollipop tool to deburr the backside edges. #shorts #auodeskCAM #Fusion360 #Fusionisnotatoy #FusionCanFiveAxis
Programming Xometry Mill Test Part using Fusion 360 - PT 4 Mechanical Advantage 2023-06-19 | This video is a continuation of setting up and programming the Xometry mill test part using Fusion 360. I'll show the process for the surface milling operations and how to extend the tool off the surface of the part. youtu.be/93oCFMCqQZgHave a project you need help with? Set up a project consultation or book time with me here:http://www.mechanicaladvantage.com/schedule-nowInterest in Fusion 360 training? Check out my CAD, mill, and lathe classes here as well as hands on machining class. www.mechanicaladvantage.com/trainingDownload the files from the Xometry website shown in this videocommunity.xometry.com/kb/articles/611-cnc-mill-test-part
Programming Xometry Mill Test Part using Fusion 360 - PT 3 Mechanical Advantage 2023-06-10 | This video is a continuation of setting up and programming the Xometry mill test part using Fusion 360. I'll demonstrate the process of drilling and tapping the holes, roughing the remaining material, and finishing the flat faces. Have a project you need help with? Set up a project consultation or book time with me here:http://www.mechanicaladvantage.com/schedule-nowInterest in Fusion 360 training? Check out my CAD, mill, and lathe classes here as well as hands on machining class. www.mechanicaladvantage.com/trainingDownload the files from the Xometry website shown in this videocommunity.xometry.com/kb/articles/611-cnc-mill-test-part
Programming Xometry Mill Test Part using Fusion 360 - PT 2 Mechanical Advantage 2023-05-12 | This video is a continuation of setting up and programming the Xometry mill test part using Fusion 360. I'll demonstrate the process of flipping the part and setting up the part in the vise, removing the hat of stock material, and preforming a roughing operation on the part. Have a project you need help with? Set up a project consultation or book time with me here:http://www.mechanicaladvantage.com/schedule-nowInterest in Fusion 360 training? Check out my CAD, mill, and lathe classes here as well as hands on machining class. www.mechanicaladvantage.com/trainingDownload the files from the Xometry website shown in this videocommunity.xometry.com/kb/articles/611-cnc-mill-test-part
Programming Xometry Mill Test Part using Fusion 360 - PT 1 Mechanical Advantage 2023-05-05 | This video will start the process of setting up and programming the Xometry mill test part using Fusion 360. You'll see where to access the files and how to set up the CAD and CAM in Fusion 360 to begin toolpathing the first setup of the part. Have a project you need help with? Set up a project consultation or book time with me here:http://www.mechanicaladvantage.com/schedule-nowInterest in Fusion 360 training? Check out my CAD, mill, and lathe classes here as well as hands on machining class. www.mechanicaladvantage.com/trainingDownload the files from the Xometry website shown in this videocommunity.xometry.com/kb/articles/611-cnc-mill-test-part
Fusion 360 - Geneva Wheel Modeling Tutorial Mechanical Advantage 2023-04-19 | This video will walk through the process and reasoning for modeling a geneva wheel.Link to PDF file bit.ly/3LdMo1Z
Fusion 360 - WCS Location Options Mechanical Advantage 2023-04-14 | This video will look at different options for locating the WCS when creating a setup along with the strengths and drawbacks for the different WCS location options. Have a project you need help on? Contact me at www.mechanicaladvantage.com/schedule-now
Fusion 360 - An alternate take on modeling a tutorial file Mechanical Advantage 2023-04-11 | This video will show a different way to model a tutorial shown on YouTube. Have a look at the original tutorial found here and give him a like and a follow. youtube.com/watch?v=28xtBWoJbfoIf you have any questions please leave them in the comments section below.
Fusion 360 New CAM Geometry Selections Mechanical Advantage 2023-01-29 | Changes are coming to the way users select geometry for CAM operations.This video will show those changes before the features are even released and how you can use them. What do you think of these improvements in the comments below.
Fusion 360 Parametric Self Centering Vise Mechanical Advantage 2022-11-23 | Link to the vise model used in the video https://lang-technik.de/en/products/48120-77-makrogripr-77-5-axis-vise-jaw-width-77-mm-clamping-range-0-120-mm?fbclid=IwAR20m9m_zhuvf-88PItIhOccnKwjbwMZCUE-nodyGKI6hGP2It1fbA27e2w#tab-produktinfoIn this video I will show you how you can download a vendor model of the self-centering vise and turn it into an intelligent vise with stock controlled by parameters.Link to setting up a traditional fixed jaw vise youtu.be/FOQmAMzWMgQ
Fusion 360 - Organize your files using Derive Mechanical Advantage 2022-09-05 | In this video I'll demonstrate how to use the Derive command and the benefits of doing so to organize your designs and keep design and manufacturing happy.
Fusion 360 - What is the difference between Joints and As-Built Joints? Mechanical Advantage 2022-08-30 | destaco.com/clamping/manual/hold-down-clamps/hold-down-clamps-247-267/productdetails.247-U.html (link to download the clamp shown in the video)This video covers the difference between As-Built Joints and Joints, and when to use one over the other. Also covered in the video are Rigid Groups and Joint Origins. Along the way I show how tools for selecting points when creating joints as well as how to set joint limits.
Fusion 360 - Designing a bracket to hold bar stock Mechanical Advantage 2022-08-27 | In this video I'll show the process for doing a top down design to model a bracket to hold bar stock in my garage. The bracket is designed to fit the space in between the garage door track and the wall.youtube.com/watch?v=Bky7TsNN47E&t=13s (Video showing the fabrication of the brackets)youtube.com/channel/UCYbjkSU4bTbOhXbMHMBAlIg (Jared's YouTube channel)instagram.com/pickrellweld_fabfacebook.com/pickrellwelding
Fusion 360 - Optimizing Large Patterns to design a Fixture Plate Mechanical Advantage 2022-03-22 | In this video, I'll design a fixture plate that is designed to mount in in the dovetails jaws of a Mlock 125 Duo vise. I'll also cover some tips on how to deal with large patterns as well as mitigating automatic geometry projections.
Part 3 - Machining a Go/No Go Gauge with the Syil X7 Mechanical Advantage 2022-03-19 | In the previous two videos, linked below, I I ran through the CAD and CAM required to manufacture this Go/No Gauge. Part 3 will cover watching the toolpaths run on the machine. youtu.be/icpKlPQSynYyoutu.be/HGaNS6wPNaoHave a question? Leave them in the comments down below. Thanks for watching
Part 2 - Toolpathing a Go/No Go Gauge with Fusion 360 Mechanical Advantage 2022-03-17 | In the previous video I showed the process of creating a dual station vise with soft jaws and joint origins. As well as how I drew and positioned the component in the vise. youtu.be/icpKlPQSynYIn part two, I create the soft jaw cutouts and add the toolpaths to CAM the softjaws and the component.
Part 1 - Creating Joint Origins with Fusion 360 Mechanical Advantage 2022-03-15 | In part one of this video series, I’ll do the CAD work for an upcoming job. I’ll cover creating jaws, adding joints, creating joint origins, drawing the component, as well as positioning the components in the vise stations. Part two will cover toolpathing the part. youtu.be/FOQmAMzWMgQ (Creating a parametric from scratch
Syil X7 Machining 1018 Steel Mechanical Advantage 2022-02-19 | This video will show the process of machining the t-slot nut that I modeled and tool pathed in the previous video. You can find that video here.youtu.be/4NSaMa3cmOkThis is the first time for me machining steel with the Syil X7. I thought the machine would do OK, but it did great and exceeded my expectations. Have a look at the process and let me know if you have any feedback or questions. Check out my website where you can work on one with me or take one of my online training classeswww.mechanicaladvantage.com/trainingwww.mechanicaladvantage.com/schedule-now
Modeling and Toolpathing a Steel T-Slot Nut Mechanical Advantage 2022-02-17 | Need help or support for your projects?www.mechanicaladvantage.com/schedule-nowVisit Training Class Calendar:www.mechanicaladvantage.com/trainingThis video will show the process of modeling a steel T-Slot Nut and adding the tool paths to machine the top and bottom side including a thread milling operation
Understanding Sketch Constraints and Dimensions Mechanical Advantage 2022-02-15 | This video will help users better understand different constraint types and as well as dimensions. This video should be especially helpful for users transitioning from AutoCAD to Fusion. Want to work with me? Book now at www.mechanicaladvantage.com/schedule-nowCheck out my online training classes for Modeling, Mill, and Lathe. Check them out here www.mechanicaladvantage.com/training
Mechanical Advantage Updates and Training Schedule Mechanical Advantage 2022-02-12 | I have published a list of upcoming classes for Mill, Lathe, and Fusion CAD Modeling. Find them herewww.mechanicaladvantage.com/trainingI've also enabled monetization for the channel so you will start seeing ads on the videos. If there are too many, please let me know. Finally, keep an eye out for future hands-on CNC Machine training with a curriculum that I have completely designed from scratch.
Fusion 360 Post Processing Demystified Mechanical Advantage 2022-02-10 | A few Fusion 360 updates ago, Autodesk implemented a new way to post process code called NC Programs. I’ve observed many users using this new functionality in the same way they used the legacy Fusion 360 post processing method and were frustrated by all the NC Programs that were created in their browser. This video will show you the benefit of the new Fusion 360 post processing tools and how they are designed to make your job easier and more efficient.
How To Run an Unproven Program and Not Crash with a Siemens 808D Control Mechanical Advantage 2022-02-05 | Operating a CNC machine can be intimidating, but it doesn't need to be. This video will show you the method I use to set up parts on the Syil X7 to have the confidence to know that I'm not going to hit the vise or other work holding with the tool or the spindle and avoid major catastrophic crashes.
Fusion 360 3D Flat Mechanical Advantage 2021-08-26 | It's true. Autodesk is taking away 3D Horizontal. This video will show what's next for machining flat surfaces using the new 3D Flat command. I'll demonstrate 3D Flat on a fixture and show the benefits over 3D Horizontal as well as some of the options you can find in the new Flat command
Fusion 360 Adaptive Clearing Machining Time Results Comparison Mechanical Advantage 2021-08-14 | In a previous video (link below) I created identical features and applied adaptive clearing toolpaths to those features. One set of features uses one way adaptive clearing while the other set uses both ways. Everything else between the operations is identical with the exception of both ways and a smaller stepover for the conventional cut on the both ways operations. Link to the video showing the CAM setup for this experimentyoutube.com/watch?v=bZzeQnxgdGM&t=5s
Fusion 360 CAM - Adaptive Clearing Both Ways Mechanical Advantage 2021-08-05 | In this video, I'll look at one an option found in 2D and 3D adaptive clearing called both ways. I'll explain what it does, why you might want to use it, and set up an experiment to find out if it really is faster than one way adaptive and run the toolpaths in a future Video.
Fusion 360 CAM Soft Jaw Tutorial Using Combine Command Mechanical Advantage 2021-08-03 | In this video I will show an alternate to create soft jaws using the Combine command. I'll also show I how I have my smart vise setup so I can quickly place a component and create the soft jaw cavity to get ready for CAM.
Machining a Blend toolpath on the Syil X7 Mechanical Advantage 2021-07-31 | In a previous video I ran through how to create a Blend toolpath and then compared that Blend toolpath to a Scallop toolpath. Let's machine the part on the Syil X7 and compare and contrast the results Blend and Scallop
Fusion 360 CAM Understanding Blend Mechanical Advantage 2021-07-29 | This video will explain how to enable the Blend command in Fusion CAM, what blend does well, and the inputs required to create a blend toolpath. In the video I also compare Blend to scallop to show the differences between them. Check back in the next video where I will machine the part on the Syil X7 so we can visually compare the two toolpaths.
Machining a bottle opener on the Syil X7! Mechanical Advantage 2021-07-24 | In this video I'll give an overview of the toolpaths for the program and then we'll head out to the garage to machine the top side, soft jaws, and flip side to complete this bottle opener. I'm a CAD designer, I'm a CAM Programmer, I'm not a video editor or videographer. I'll get better over time, but it will take time. I'll continue to work on keeping the spray off the camera and hopefully add another camera angle or two.
Fusion 360 CAM Soft Jaw Tutorial Mechanical Advantage 2021-07-22 | This video will demonstrate one of the methods that can be used for creating soft jaws. If you are interested in learning other ways to do this, let me know in the comments below.
Fusion 360 Screwdriver Tutorial Mechanical Advantage 2021-07-20 | This video is a step by step tutorial on how to model a phillips head screwdriver.
Saturday Garage Update Mechanical Advantage 2021-07-17 | In this video I'll talk about the new Rode Wireless Go Mic system I purchased, new tools from bt30tools.com, a minor crash I had with my Mlock 125 Duo Vise, and a stupid mistake I made with the tool changer. Rode Wireless Go 2 rode.com/microphones/wireless/wirelessgoiiLink to BT30 Tools bt30tools.com
Fusion 360 CAM - Trace and Engrave Mechanical Advantage 2021-07-15 | ***Please note I forgot to change the text on the right so it says traced text when it should say engraved text**** This video will demonstrate the differences between the Trace and Engrave toolpaths and when to use each option. I'll also show the difference between single line .shx text and outline TrueType font text.
Fusion 360 Press Pull Command Mechanical Advantage 2021-07-13 | This video will be an explanation of the Press Pull command found in Fusion 360. I'll also demonstrate how the Marking Menu works as well as right click content menus based on what you have selected.
Mechanical Advantage Update and News Mechanical Advantage 2021-07-11 | Link to Rapidair airline kit I purchased amazon.com/gp/product/B00CZ7GTLU/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 This video will give you an update on what I have been busy with lately, my plan to machine your parts, website updates around training classes and products for sale, and a little update on what I have been working on in the garage.
Syil X7 - Speed Vise Handle First Chips! Mechanical Advantage 2021-04-24 | I apologize for the camera angle. I didn't realize the spindle cover was blocking the view until after I had made the handle. I'll get better with video capture and audio quality with time. This is the first program I have ever run start to finish with multiple toolpaths. I did do a test handle where I posted and ran each toopath one by one. Stay tuned to a future video to find out how you can win one of these handles as a giveaway when I cross the 10,000 subscriber mark!
Using Fusion 360 with External Slicers for 3D Printing Mechanical Advantage 2021-01-05 | This video will show how Fusion files can be directly transferred to an external slicing program used to create a 3D print without having to export and reimport the file into the slicing software.
Training Classes and Syil X7 Update Mechanical Advantage 2021-01-02 | Have you ever wanted to take a Fusion 360 training class with me but didn't want to or weren't able to travel to attend one? Good news! You can now sign up for my live online instructor led classes that will be hosted by me. If you have any question send an email to info@mechanicaladvantage.com. Use Coupon Code MILL1 at checkout for a $200 discount on this inaugural class.I'll also give you an update on getting the Syil X7 up and running.
Fusion 360 NC Programs for Multiple Setups Mechanical Advantage 2020-11-29 | This video will demonstrate how to create an NC Program to output code for multiple setups at once while maximizing efficiency and minimizing tool changes, yet still remaining safe to run.
