Uploaded March 2021 | Updated November 2026, 3 hours ago
In this video, I am testing the performance of a new version of the FOCBOX motor controller called TENKA. It can be configured to run dual motors or a single motor depending on what firmware you load onto it. In this test, we are running 120 motor amps into a single motor using the VARI-ESC firmware.
Why is this useful? If you are wanting to build an LEV such as a skateboard, ebike, or scooter, and only have a small budget, you might consider the TENKA as it is an affordable motor controller that can output big power into a single larger motor. However, later, when your budget increases, you might wish to add the 2nd motor to improve braking performance, torque output & handling characteristics.
WARNING: The TENKA comes setup from the factory with firmware to run dual motors. If you pair the motor wires together to run a single motor with default firmware the hardware will be damaged & the warranty void.
Download VARI-ESC firmware required to for running a single motor here: github.com/variESC
CHECK OUT THE COMMUNITY FORUM: https://electric-skateboard.builders/
GET THE FOCBOX UNITY NOW: massivestator.com/products/focbox-unity-dual-motor-controller
FOLLOW ESK8 BUILDER ON
►INSTAGRAM - instagram.com/esk8builder
►FACEBOOK - facebook.com/esk8builders
SHOUT ESK8 BUILDER A BEER
►PATREON - patreon.com/user?u=41192011
------------------------------------------
MY GEAR
►my main camera - amzn.to/2GzCA3S
►my 2nd camera - amzn.to/3iFVBP9
►main lens - amzn.to/3iFei5z
►my tiny lens - amzn.to/2GAeGFs
►my wide angle lens - amzn.to/34t5JFG
►my ND filter - amzn.to/3jB7nLX
►my drone - amzn.to/3iGIzkc
►nd filterers for the drone - amzn.to/2SBgwbr
►wireless rode microphone - amzn.to/3iA3oxS
►my main studio key light - amzn.to/2SzdiVN
►my small RGB led lights - amzn.to/3jHsH2e
►my big tripod - amzn.to/3iJaZds
►my rode microphone/camera boom arm stand - amzn.to/3nrlxBJ
►my curved wide screen monitor - amzn.to/3jI2Ffh
►the SD cards I use - amzn.to/34xjG5L
As an Amazon Associate, I earn a small commission from qualifying purchases. Some of the links are affiliate links and if you decide to buy the gear through them I earn a tiny commission. It costs you nothing but helps me big time in keeping these videos coming.
Thank you for the support & thanks for watching.
Jason Potter
#ElectricSkateboards #DIY #ESK8 #VESC #Howto #Skateboarding #Tutorials #builder
In this video, I am testing the performance of a new version of the FOCBOX motor controller called TENKA. It can be configured to run dual motors or a single motor depending on what firmware you load onto it. In this test, we are running 120 motor amps into a single motor using the VARI-ESC firmware.
Why is this useful? If you are wanting to build an LEV such as a skateboard, ebike, or scooter, and only have a small budget, you might consider the TENKA as it is an affordable motor controller that can output big power into a single larger motor. However, later, when your budget increases, you might wish to add the 2nd motor to improve braking performance, torque output & handling characteristics.
WARNING: The TENKA comes setup from the factory with firmware to run dual motors. If you pair the motor wires together to run a single motor with default firmware the hardware will be damaged & the warranty void.
Download VARI-ESC firmware required to for running a single motor here: github.com/variESC
CHECK OUT THE COMMUNITY FORUM: https://electric-skateboard.builders/
GET THE FOCBOX UNITY NOW: massivestator.com/products/focbox-unity-dual-motor-controller
FOLLOW ESK8 BUILDER ON
►INSTAGRAM - instagram.com/esk8builder
►FACEBOOK - facebook.com/esk8builders
SHOUT ESK8 BUILDER A BEER
►PATREON - patreon.com/user?u=41192011
------------------------------------------
MY GEAR
►my main camera - amzn.to/2GzCA3S
►my 2nd camera - amzn.to/3iFVBP9
►main lens - amzn.to/3iFei5z
►my tiny lens - amzn.to/2GAeGFs
►my wide angle lens - amzn.to/34t5JFG
►my ND filter - amzn.to/3jB7nLX
►my drone - amzn.to/3iGIzkc
►nd filterers for the drone - amzn.to/2SBgwbr
►wireless rode microphone - amzn.to/3iA3oxS
►my main studio key light - amzn.to/2SzdiVN
►my small RGB led lights - amzn.to/3jHsH2e
►my big tripod - amzn.to/3iJaZds
►my rode microphone/camera boom arm stand - amzn.to/3nrlxBJ
►my curved wide screen monitor - amzn.to/3jI2Ffh
►the SD cards I use - amzn.to/34xjG5L
As an Amazon Associate, I earn a small commission from qualifying purchases. Some of the links are affiliate links and if you decide to buy the gear through them I earn a tiny commission. It costs you nothing but helps me big time in keeping these videos coming.
Thank you for the support & thanks for watching.
Jason Potter
#ElectricSkateboards #DIY #ESK8 #VESC #Howto #Skateboarding #Tutorials #builder










