KababFPV | Flywoo 1103 Motor @Kabab | Uploaded 5 years ago | Updated 3 hours ago
Table of Contents:
00:33 - A little about Flywoo
01:22 - Motor review
04:05 - A little about the prop
05:42 - Should you floss or brush first?


Overview of some micro parts:

GepRC 1103 - Good powerful motor. C-clip on shaft, possible fracture point
http://bit.ly/2XEBoPd 8000kv recommended for 65-76mm light blade 2S

Amoxinno 1103 - Fantastic motor, fantastic efficiency, not the most powerful. Mind the mounting platform.
http://bit.ly/2JrkvU6 7500kv recommended for 65-76mm light blade 2S

SkyStar 1103 - This should be the Hyperlite 1103 however it says it has an 8.5mm mounting platform. Not sure if they really meant 9mm. One of the lightest 1103's with the strongest magnets and highest power output.
http://bit.ly/2YPuYhI 8000kv recommended for 65-76mm light blade 2S

Apex Sonic - Excellent all around motor. Nothing bad to say at all.
http://bit.ly/2xFx4EH 7777kv recommended for 65-76mm light blade 2S

Flywoo 1103 - Excellent motor. Thin wires for my taste but still high quality. Much easier to solder as a result.
bit.ly/2Jy9Oy4 7650kv recommended for 65-76mm light blade 2S. I don't recommend the 10500kv for anything...use the high kv hyperlite motor if you want to do 1S or anything whoop, it's lighter.

Flywoo 1404 - Excellent looking all around. Little heavier than it needs to be but really great quality feel.
bit.ly/2XINSW2 4850kv recommended for light blade 3" or very light blade 4" on 3S.

Tello 76mm prop - Low amp draw, high speed and efficiency. Low punch. Fantastic on a good 1103 however that's the absolute smallest motor I would recommend. The current options only come in 1mm shaft. Drilling this plastic out to 1.5mm is just awful but it is a really excellent prop.
http://bit.ly/2YNjNFY 7500-7800kv recommended with 2S 450mah and 1103's. Drop down to 5000-5200kv for 3S.

My Favorite floss: amzn.to/2xGnzW3


NEW QUADS FROM DIATONE that I worked on with them:

2.5" - 2S 8500kv
bit.ly/2XWAvpd

2.5" - 3S
bit.ly/2XH4zpC

3" - 3S
bit.ly/32kA8V1

The new 16x16 stack used in these: bit.ly/2XWCw4L


▼Join my FB group for more discussion: Kabab FPV
facebook.com/groups/379155946182689

▼ Coupon code items
-GEPRC Phantom 16x16 version: http://bit.ly/30F9iVT
LIMITED Coupon code for 12% off: BGgeprc909

-X9 Lite Pro: http://bit.ly/2M2HS8x
Coupon code: BGX9LPKABA $99.99

-Banggood Summer Prime Sale: bit.ly/2JLwUBy
-Banggood 2019 Rc prime Sale: bit.ly/2LZUnS0


▼ My main 5" quad setup:
-Hyperlite Glide Floss (will be re-released soon)
-Motor 1750kv/ESC combo: http://bit.ly/2XAEHXH
-WaFL’s Cap Cap: http://bit.ly/2GUpXxO
-Prop: http://bit.ly/2LfZS0k
-Battery: http://bit.ly/2XXjbwU
-FC: http://bit.ly/2XRc8G8
-FPV Cam: http://bit.ly/2Q7LfL7
-Vtx: http://bit.ly/2HsrASs
-ND GoPro Mount 30deg: http://bit.ly/2WC15zc
-ND Filter (if used): http://bit.ly/2WEmQ1j

▼Alternative motors:
-Xing 2306: http://bit.ly/30uYo4Q
-Xing 2208: http://bit.ly/2y3te8R
-FANTASTIC 6" motor: http://bit.ly/2LqghOZ

▼ 5" Sub $200 build that's still good
-Frame: goo.gl/EpXQhZ
-FC/4in1 Stack: goo.gl/HprVbj
-Motors: http://bit.ly/30uYo4Q
-Props: goo.gl/ZnzY2y
-Props: goo.gl/VMBiQh
-FPV Cam: goo.gl/FDJhYw
-Vtx: goo.gl/JNVDMn

-Starter goggles: goo.gl/GvJUkT
-Batt pad material: http://bit.ly/2QGWhYb

▼ If you want to solder better:
-Fantastic solder: amzn.to/2P5QM2W
-Fantastic iron: goo.gl/DqBipa


▼ Tips?
-PayPal: paypal.me/kababfpv
-Bitcoin: 1E4XZXoD4rS6MYWVWuenY7Kw2M1YgyNpoQ
-Nano: xrb_1188ek5bd7tb9kw67asnp9o65byuoaxbtpxuznx1ribf75x78awywmakj55f
-ETH: 0xD067F93811f2eC31CB1928901002dfdf9A492EF5
-LTC: La2KWYAjp4VT2Lq2M76pbjzXWvRyjpfCtG
-Tesla Referal code: https://ts.la/bob40889
Please use my referral code if you're gonna buy a Tesla. You get some free stuff when you do and I get better status with Tesla.