Flying a 3D printed Rocket @TheFirstLayer
Flying a 3D printed Rocket  @TheFirstLayer
Uploaded September 2020 | Updated November 2026, 3 hours ago
On this very special episode, Bryan and Richard launch 3 rockets of the same design. Using Tim Van Milligan's design of the Ragnarocket found in Peak of Flight issue #521, we used Fusion 360 to upscale the design and create STL files that could be printed on a CR-10S. But Does it perform the same as a traditionally built rocket like the ones you can buy at your local hobby shop?

Links for products in this video…
Nose cone and Airframe from Apogee Components: apogeerockets.com
Wood for fins and centering rings from PM Hobbycraft: pmhobbycraft.ca
Parachutes and Nomex protectors from Sunward Hobbies: sunwardhobbies.ca
Electronics from Solarbotics: solarbotics.com
Filament from Filaments.ca: filaments.ca
T-Shirts from KKP: kkpcanada.ca

Special thanks to Tim Aucoin and his son for coming out and cheering us on.

Share this video with a friend ►

Send your questions to ► questions@thefirstlayer.com

DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
_____________________________________
RESIN 3D PRINTERS I use - Affiliate Links below

Wanhao Duplicator 7 Plus ►
amazon.ca/dp/B07BN1FC3C/?ref=exp_thefirstlayer_dp_vv_d
https://s.click.aliexpress.com/e/_d6HAjjz

Creality LD-002R ►
amazon.ca/dp/B082LTLTD3/?ref=exp_thefirstlayer_dp_vv_d
banggood.com/custlink/v3mD1yDbCv

Phrozen Sonic Mini ►
phrozen3dp.com/products/sonic-mini-lcd-rapid-3d-printer

_____________________________________
FDM 3D PRINTERS I use - Affiliate Links below

Creality Ender 3 Pro (Best overall printer for beginners) ►
amzn.to/36NkuDy
bit.ly/36Izhz4
http://s.click.aliexpress.com/e/K2OS2wGC
banggood.com/custlink/vGvGqPNc6a

Lotmaxx SC-10 ►
amzn.to/36T6fg9
bit.ly/2Rk06TV

Creality CR-10 Max ►
amzn.to/2TmKXUv
bit.ly/2FSKGjW
http://s.click.aliexpress.com/e/_nZe3O

Creality CR-10S V2 ►
amazon.ca/dp/B07Y348B9Q/?ref=exp_thefirstlayer_dp_vv_d
banggood.com/custlink/vKv3wRKQ8m

_____________________________________

My Patreon ► patreon.com/TheFirstLayer

Buy Me a Coffee ►buymeacoffee.com/TheFirstLayer

Merch ► shopthefirstlayer.com (Now Online)
Courses ► learnthefirstlayer.com (coming soon)
_____________________________________

Facebook ► facebook.com/groups/TheFirstLayer
Instagram ► instagram.com/the_1st_layer
YouTube ► youtube.com/thefirstlayer
_____________________________________

Thanks for watching and supporting my efforts.
Flying a 3D printed RocketSaving money by printing a Master Spool.Mingda Rock 3 Review : Value and performanceDont forget to like, subscribe and get notification of new 3D printing episodes.Im hopping glad to help! : TFL Live: Ask for HELPBest Canadian made filament! Matter3D PLA spotlightMy Voron 2.4 r2 printing Polymaker PolyLite ABS... #Shorts #polymaker #voron #calgarymakerfaireThe What, Where, and How of Eccentric SpacersEnd of 2020 Build.Hands On Review of the Creality Ender 3 V23D Printing Made Easy: Book ReviewTFL Live: with a special guest co-host
TheFirstLayer |

Flying a 3D printed Rocket

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER