The Real Sam Prentice | FLSUN T1 Delta 3D Printer : Feel And Hear The Power Of Wind @TheRealSamPrentice | Uploaded July 2024 | Updated October 2024, 2 hours ago.
Welcome along to another first look. This time is the FLSUN T1 Delta 3D printer, and despite one or two hang-ups, it's still a gust of fresh air that I quite like. As always my opinions are my own and I can only review the product that is sent to me in a fair and balanced way. I don't think that you will be wasting your money with this one and feel that its s good deal at $499. Despite the small issues overall the printer with some tuning could turn out to be a brilliant rapid prototyping machine which you could go on to use for many years to come.
Currently onsite for $499 -
T1 EU shareasale.com/r.cfm?b=2472494&u=3473385&m=147240&urllink=&afftrack=
T1 USA shareasale.com/r.cfm?b=2472493&u=3473385&m=147240&urllink=&afftrack=
Thank you to the channel sponsors pcbway.com - Make sure you check them out after this video for all your PCB needs. They also do 3D printing, so if you have a project in mind but want to outsource it, breeze online for a quote.
https://linktr.ee/TheRealSamPrentice (all my links can be found here)
Build volume 320 x 320 x 430 mm—plenty of room for all your wildest creations. 📏
Max. speed 1200 mm/s—faster than a gust of wind! 🌬️
Max. acceleration 40,000 mm/s²—so quick, it’s like a whirlwind! 🌪️
Max. flow rate 110 mm³/s—giving you a steady stream of performance. 💨
300°C hotend with 80W heating element—hot enough to blow your mind! 🔥
Closed-loop stepper motor—keeps everything on a steady course, no breezes allowed. 🚀
40,000 rpm cooling fan—blowing away the heat at top speed! 🌀
AI Camera Intelligent Detection—keeping an eye out, like a hawk in a storm! (but does not work at the moment) 🦅
Video Chapters:
0:00 Introduction to the T1
0:25 Video is sponsored by pcbway.com
0:54 My Background with FLSUN
1:15 Setup, Unboxing & Specs
3:00 Is the T1 any different?
3:15 Test Prints and Problems: Blowing in the Wind
8:02 Next problem: Another Storm Brewing
8:36 Gail Force Winds: Testing the Ranges
11:07 CPAP Tech Spec: Making Some Noise
12:25 Back to Prints: A Breeze of Fresh Air
13:05 Final Thoughts: Whisper Quiet or Howling Success?
#3dprinter #delta3d #flsun #flsunt1 @flsun3dprinter
Welcome along to another first look. This time is the FLSUN T1 Delta 3D printer, and despite one or two hang-ups, it's still a gust of fresh air that I quite like. As always my opinions are my own and I can only review the product that is sent to me in a fair and balanced way. I don't think that you will be wasting your money with this one and feel that its s good deal at $499. Despite the small issues overall the printer with some tuning could turn out to be a brilliant rapid prototyping machine which you could go on to use for many years to come.
Currently onsite for $499 -
T1 EU shareasale.com/r.cfm?b=2472494&u=3473385&m=147240&urllink=&afftrack=
T1 USA shareasale.com/r.cfm?b=2472493&u=3473385&m=147240&urllink=&afftrack=
Thank you to the channel sponsors pcbway.com - Make sure you check them out after this video for all your PCB needs. They also do 3D printing, so if you have a project in mind but want to outsource it, breeze online for a quote.
https://linktr.ee/TheRealSamPrentice (all my links can be found here)
Build volume 320 x 320 x 430 mm—plenty of room for all your wildest creations. 📏
Max. speed 1200 mm/s—faster than a gust of wind! 🌬️
Max. acceleration 40,000 mm/s²—so quick, it’s like a whirlwind! 🌪️
Max. flow rate 110 mm³/s—giving you a steady stream of performance. 💨
300°C hotend with 80W heating element—hot enough to blow your mind! 🔥
Closed-loop stepper motor—keeps everything on a steady course, no breezes allowed. 🚀
40,000 rpm cooling fan—blowing away the heat at top speed! 🌀
AI Camera Intelligent Detection—keeping an eye out, like a hawk in a storm! (but does not work at the moment) 🦅
Video Chapters:
0:00 Introduction to the T1
0:25 Video is sponsored by pcbway.com
0:54 My Background with FLSUN
1:15 Setup, Unboxing & Specs
3:00 Is the T1 any different?
3:15 Test Prints and Problems: Blowing in the Wind
8:02 Next problem: Another Storm Brewing
8:36 Gail Force Winds: Testing the Ranges
11:07 CPAP Tech Spec: Making Some Noise
12:25 Back to Prints: A Breeze of Fresh Air
13:05 Final Thoughts: Whisper Quiet or Howling Success?
#3dprinter #delta3d #flsun #flsunt1 @flsun3dprinter
