Uploaded January 2019 | Updated September 2026, 2 weeks ago
The Flexible Build System by Wham Bam Systems - WhamBamSystems.com
Getting your prints to stick, then getting them off your machine is 90% of your 3D printing issues and worries! First, you do everything you can to get the filament to stick for the first layer and keep on holding, then you finally get a good stick, and your new worries are how to get the parts off the print bed.
Wham Bam Flexible Build System is your solution to all your troubles!
° Your prints stick easily from the first layer onward! First layer perfection with our Wham Bam PEX Build Surface
° Simply bend our Flexi Plate and your prints pop off!
° A quick wipe with alcohol, slap the Flexi Plate onto the Magnetic Base and you are back to printing!
No more tape, glue, hair spray, ABS slurry, special additives.
All of your filaments stick to our proprietary PEX build surface.
No more messing with binder clips and limiting your build area!
Print edge to edge with our magnetic bed.
No more stabbing hands, breaking parts, or gouging your build surfaces trying to get your prints off the bed.
Just bend our Flexi Plate and parts magically pop right off!
Stop chiseling parts on your machine, ruining your calibration or damaging its precision parts.
Lift off our plate to remove prints outside of the machine.
No more lost time waiting for your heavy glass or aluminum bed to cool down, prying to remove prints, cleanup of glues and tape and re-application.
Get right back to printing with no or little downtime, just put the WB Flexi Plate back on the machine and you are in business. Even keep extra WB Flexi Plates on hand to do a live swap and speed up your workflow to the max!
The Flexible Build System by Wham Bam Systems - WhamBamSystems.com
Getting your prints to stick, then getting them off your machine is 90% of your 3D printing issues and worries! First, you do everything you can to get the filament to stick for the first layer and keep on holding, then you finally get a good stick, and your new worries are how to get the parts off the print bed.
Wham Bam Flexible Build System is your solution to all your troubles!
° Your prints stick easily from the first layer onward! First layer perfection with our Wham Bam PEX Build Surface
° Simply bend our Flexi Plate and your prints pop off!
° A quick wipe with alcohol, slap the Flexi Plate onto the Magnetic Base and you are back to printing!
No more tape, glue, hair spray, ABS slurry, special additives.
All of your filaments stick to our proprietary PEX build surface.
No more messing with binder clips and limiting your build area!
Print edge to edge with our magnetic bed.
No more stabbing hands, breaking parts, or gouging your build surfaces trying to get your prints off the bed.
Just bend our Flexi Plate and parts magically pop right off!
Stop chiseling parts on your machine, ruining your calibration or damaging its precision parts.
Lift off our plate to remove prints outside of the machine.
No more lost time waiting for your heavy glass or aluminum bed to cool down, prying to remove prints, cleanup of glues and tape and re-application.
Get right back to printing with no or little downtime, just put the WB Flexi Plate back on the machine and you are in business. Even keep extra WB Flexi Plates on hand to do a live swap and speed up your workflow to the max!
