Uploaded September 2026 | Updated November 2026, 13 hours ago
Learn how to polish rocks on a flat lap by taking a saw-marked piece of jasper and quartz from dull and uneven to a clean mirror finish. In this beginner lapidary tutorial, I’ll show the full flat lap polishing process using the Sharpie grid trick, an 80-grit diamond disc, 180-grit diamond disc, smoothing discs, and aluminum oxide polish on a felt pad.
This guide is made for beginners who want to understand how to polish rocks, remove saw marks, find low spots, avoid leftover scratches, and build a better final shine. I’m using an eight-inch Hi-Tech Diamond All-U-Need flat lap, but the same basic rock polishing principles apply to many flat lap setups.
We’ll start by marking the face with a Sharpie grid so we can see which areas are high and low. Then we’ll flatten the stone at 80 grit, refine the surface at 180 grit, clean between every stage, move through the brown, red, and blue smoothing discs, and finish with aluminum oxide polish for that final mirror shine.
If your rocks look smooth when wet but still refuse to polish, this video will help you understand why. The final polish only reflects the quality of the surface you created in the earlier stages.
Chapters
00:00 Getting Started
00:40 80 Grit Diamond Disc
01:57 180 Grit Diamond Disc
#rockpolishing #lapidary #flatlap #HowToPolishRocks #willorocks
Learn how to polish rocks on a flat lap by taking a saw-marked piece of jasper and quartz from dull and uneven to a clean mirror finish. In this beginner lapidary tutorial, I’ll show the full flat lap polishing process using the Sharpie grid trick, an 80-grit diamond disc, 180-grit diamond disc, smoothing discs, and aluminum oxide polish on a felt pad.
This guide is made for beginners who want to understand how to polish rocks, remove saw marks, find low spots, avoid leftover scratches, and build a better final shine. I’m using an eight-inch Hi-Tech Diamond All-U-Need flat lap, but the same basic rock polishing principles apply to many flat lap setups.
We’ll start by marking the face with a Sharpie grid so we can see which areas are high and low. Then we’ll flatten the stone at 80 grit, refine the surface at 180 grit, clean between every stage, move through the brown, red, and blue smoothing discs, and finish with aluminum oxide polish for that final mirror shine.
If your rocks look smooth when wet but still refuse to polish, this video will help you understand why. The final polish only reflects the quality of the surface you created in the earlier stages.
Chapters
00:00 Getting Started
00:40 80 Grit Diamond Disc
01:57 180 Grit Diamond Disc
#rockpolishing #lapidary #flatlap #HowToPolishRocks #willorocks










