Uploaded November 2024 | Updated September 2026, 2 weeks ago
The stock SSR on the plus4 is a bit too shady for my likely. Here is how I fixed it.
——————————————————————————————
IN THIS VIDEO:
——————————————🔗——————————————
🛟 Qidi Plus 4: 3dprintsos.com/qidi-plus4
🛟 Omron SSR: amzn.to/4hU2uMB
🛟 Heat Sink: amzn.to/48YAEdU
🛟 24V Fan: amzn.to/4fBNiSF
🛟 Thermal Fuse - AliExpress (95c): https://s.click.aliexpress.com/e/_DCsg1Mp
🛟 Thermal Fuse - Amazon (125c only): amzn.to/40VOtrt
🛟 Lever Connectors: amzn.to/4fRmgX8
🛟 JST Plug Kit: amzn.to/498KkTq
🛟 Ferrule Kit: amzn.to/3YZeinV
🛟 Printable Adaptor: printables.com/model/1078817-qidi-plus-4-ssr-and-fan-mount-for-tall-heatsink-v1
🛟 Plus 4 Wiki: github.com/qidi-community/Plus4-Wiki/blob/main/content/heater-ssr-upgrade/README.md
——————————————————————————————
TIMESTAMPS:
——————————————🕥——————————————
0:00 - INTRO & ISSUE
1:33 - MY ORIGINAL SSR BOARD
2:17 - WHY DIY?
3:30 - EVERYTHING YOU NEED TO GET THIS DONE
7:32 - REMOVING OLD SSR
10:22 - INSTALLING HEATSINK ADAPTOR
10:48 - SPLICING & PREPPING WIRES
13:38 - SSR & HEATSINK INSTALL
14:15 - THERMAL FUSE & WIRING
18:09 - FAN INSTALL
19:43 - WIRE MANAGEMENT
20:35 - MOTHERBOARD SIGNAL WIRE
21:27 - CHECK OUR WORK!
24:57 - KLIPPER CHANGES FOR FASTER HEATING
27:57 - FINAL TEST
29:13 - CONCLUSION
——————————————————————————————
DISCORD & PATREON:
——————————————🛟——————————————
🛟 NEW MERCH STORE: shop.3dprintsos.com
🛟 Join the 3DPrintSOS Discord Server: discord.gg/JH2CCjcRpx
🛟 Become a Patron: patreon.com/3dprintsos
🛟 Buy me a coffee: paypal.com/paypalme/3dprintsos
——————————————————————————————
# CHANNEL LINKS & DISCOUNTS:
——————————————🛍——————————————
🛟 BambuLab's Massive Discounts: 3dprintsos.com/bambulab-sale
🛟 Creality K2 Plus Combo is on Sale: 3dprintsos.com/k2-plus-combo
🛟 Qidi Plus4 Gets a new SSR + Extra 1 year warranty: 3dprintsos.com/qidi-plus4
🛟 Peopoly Magneto X is $700 off + FREE enclosure: 3dprintsos.com/magneto-x
🛟 Flashforge’s new Multicolor 3D Printer: 3dprintsos.com/ad5x
🛟 Polymaker’s new filament line: 3dprintsos.com/polymaker
🛟 IIIDMax Filament 5% off using code “3dprintsos”: 3dprintsos.com/iiidmax
——————————————————————————————
DISCLAIMER:
——————————————⚖️——————————————
Some of the links above are Affiliate Links. They do NOT cost you anything but using them and making a purchase provides a tiny kickback for the channel. This is one way I can afford to continue to make content for this channel. Thank you for your consideration. :)
The stock SSR on the plus4 is a bit too shady for my likely. Here is how I fixed it.
——————————————————————————————
IN THIS VIDEO:
——————————————🔗——————————————
🛟 Qidi Plus 4: 3dprintsos.com/qidi-plus4
🛟 Omron SSR: amzn.to/4hU2uMB
🛟 Heat Sink: amzn.to/48YAEdU
🛟 24V Fan: amzn.to/4fBNiSF
🛟 Thermal Fuse - AliExpress (95c): https://s.click.aliexpress.com/e/_DCsg1Mp
🛟 Thermal Fuse - Amazon (125c only): amzn.to/40VOtrt
🛟 Lever Connectors: amzn.to/4fRmgX8
🛟 JST Plug Kit: amzn.to/498KkTq
🛟 Ferrule Kit: amzn.to/3YZeinV
🛟 Printable Adaptor: printables.com/model/1078817-qidi-plus-4-ssr-and-fan-mount-for-tall-heatsink-v1
🛟 Plus 4 Wiki: github.com/qidi-community/Plus4-Wiki/blob/main/content/heater-ssr-upgrade/README.md
——————————————————————————————
TIMESTAMPS:
——————————————🕥——————————————
0:00 - INTRO & ISSUE
1:33 - MY ORIGINAL SSR BOARD
2:17 - WHY DIY?
3:30 - EVERYTHING YOU NEED TO GET THIS DONE
7:32 - REMOVING OLD SSR
10:22 - INSTALLING HEATSINK ADAPTOR
10:48 - SPLICING & PREPPING WIRES
13:38 - SSR & HEATSINK INSTALL
14:15 - THERMAL FUSE & WIRING
18:09 - FAN INSTALL
19:43 - WIRE MANAGEMENT
20:35 - MOTHERBOARD SIGNAL WIRE
21:27 - CHECK OUR WORK!
24:57 - KLIPPER CHANGES FOR FASTER HEATING
27:57 - FINAL TEST
29:13 - CONCLUSION
——————————————————————————————
DISCORD & PATREON:
——————————————🛟——————————————
🛟 NEW MERCH STORE: shop.3dprintsos.com
🛟 Join the 3DPrintSOS Discord Server: discord.gg/JH2CCjcRpx
🛟 Become a Patron: patreon.com/3dprintsos
🛟 Buy me a coffee: paypal.com/paypalme/3dprintsos
——————————————————————————————
# CHANNEL LINKS & DISCOUNTS:
——————————————🛍——————————————
🛟 BambuLab's Massive Discounts: 3dprintsos.com/bambulab-sale
🛟 Creality K2 Plus Combo is on Sale: 3dprintsos.com/k2-plus-combo
🛟 Qidi Plus4 Gets a new SSR + Extra 1 year warranty: 3dprintsos.com/qidi-plus4
🛟 Peopoly Magneto X is $700 off + FREE enclosure: 3dprintsos.com/magneto-x
🛟 Flashforge’s new Multicolor 3D Printer: 3dprintsos.com/ad5x
🛟 Polymaker’s new filament line: 3dprintsos.com/polymaker
🛟 IIIDMax Filament 5% off using code “3dprintsos”: 3dprintsos.com/iiidmax
——————————————————————————————
DISCLAIMER:
——————————————⚖️——————————————
Some of the links above are Affiliate Links. They do NOT cost you anything but using them and making a purchase provides a tiny kickback for the channel. This is one way I can afford to continue to make content for this channel. Thank you for your consideration. :)
