Uploaded August 2026 | Updated November 2026, 22 hours ago
Pulling a random C64 off the repair pile for todays video. Lets see how well this goes!
Check out PCBWay for high-quality PCB prototyping, 3D printing, and CNC machining services - pcbway.com
I take a look at a broken Commodore 64 that produces a blue or black screen upon power-up. I walk through the troubleshooting steps, starting with diagnosing and replacing a faulty power switch before tracking down an issue with the PLA chip. I also repair a broken trace left behind from a previous modification and run a full suite of diagnostic tests using a test harness and Dead Test cartridge to ensure the memory, ROMs, and SID chip are functioning properly.
─────────────────────────────
If you'd like to help keep the lights on (and the tools plugged in),
my Patreon is the best way to do it. Patrons get ad-free early access
to videos, behind-the-scenes updates, and entry to a super secret
Discord channel — plus my sincere gratitude, which is worth roughly
what you'd expect.
▸ Patreon: patreon.morefunretro.co.uk
─────────────────────────────
There's also the Retro Hardware Discord, where people who enjoy this
sort of thing gather to talk about it. It's better than it has any
right to be.
▸ Retro Hardware Discord: discord.gg/tsAbuAfqf9
─────────────────────────────
Second Channel: @morefunretro2
00:00:00 - Checking the repair shelves
00:01:46 - Selecting the Commodore 64
00:03:33 - Visual inspection of the board
00:05:45 - Diagnosing the power switch
00:07:00 - Discovering previous repair damage
00:07:53 - PCBWay sponsor message
00:08:44 - Removing and replacing the power switch
00:14:55 - Testing the new switch
00:15:08 - Running diagnostic cartridges
00:17:34 - Thermal camera inspection
00:19:42 - Identifying and removing the faulty PLA
00:25:39 - Repairing the broken trace with enamel wire
00:32:21 - Testing the replacement PLA and SID chip
00:35:10 - Final diagnostic tests
00:38:36 - Conclusion
#Commodore64 #RetroComputing #TechRepair
Pulling a random C64 off the repair pile for todays video. Lets see how well this goes!
Check out PCBWay for high-quality PCB prototyping, 3D printing, and CNC machining services - pcbway.com
I take a look at a broken Commodore 64 that produces a blue or black screen upon power-up. I walk through the troubleshooting steps, starting with diagnosing and replacing a faulty power switch before tracking down an issue with the PLA chip. I also repair a broken trace left behind from a previous modification and run a full suite of diagnostic tests using a test harness and Dead Test cartridge to ensure the memory, ROMs, and SID chip are functioning properly.
─────────────────────────────
If you'd like to help keep the lights on (and the tools plugged in),
my Patreon is the best way to do it. Patrons get ad-free early access
to videos, behind-the-scenes updates, and entry to a super secret
Discord channel — plus my sincere gratitude, which is worth roughly
what you'd expect.
▸ Patreon: patreon.morefunretro.co.uk
─────────────────────────────
There's also the Retro Hardware Discord, where people who enjoy this
sort of thing gather to talk about it. It's better than it has any
right to be.
▸ Retro Hardware Discord: discord.gg/tsAbuAfqf9
─────────────────────────────
Second Channel: @morefunretro2
00:00:00 - Checking the repair shelves
00:01:46 - Selecting the Commodore 64
00:03:33 - Visual inspection of the board
00:05:45 - Diagnosing the power switch
00:07:00 - Discovering previous repair damage
00:07:53 - PCBWay sponsor message
00:08:44 - Removing and replacing the power switch
00:14:55 - Testing the new switch
00:15:08 - Running diagnostic cartridges
00:17:34 - Thermal camera inspection
00:19:42 - Identifying and removing the faulty PLA
00:25:39 - Repairing the broken trace with enamel wire
00:32:21 - Testing the replacement PLA and SID chip
00:35:10 - Final diagnostic tests
00:38:36 - Conclusion
#Commodore64 #RetroComputing #TechRepair










