Fitting the PULLPLUG™- RST series @BoellhoffGroup
Fitting the PULLPLUG™- RST series  @BoellhoffGroup
Uploaded June 2017 | Updated November 2026, 1 hour ago
The PULLPLUG™ is pressed against the threaded part of the tool and automatically unscrews itself. The sleeve side is then inserted into the hole to be sealed. When setting is triggered, the pin is pulled into the sleeve, causing it to expand, before unscrewing itself again from the thread of the tool. The groove profile of the sleeve embeds itself in the installation material and reliably seals the hole.
Fitting the PULLPLUG™- RST seriesONSERT® Cable management - Adhesive bonding of fastenerONSERT® Insert - Adhesive bonding of fastenersGood2Know 001 – Kleben von Verbindungselementen – ONSERT®Böllhoff Group – Competence leader in 360° Joining TechnologyONSERT® Quick and process-reliable bonding of fastening elementsRIVKLE® NEO P107 – Recommendation for useAdvanced joining technologies for the aerospace industryHELICOIL® Plus AutomationHigh speed joining for ventilation ducts with RIVCLINCH® 0404 IP V2RIVKLE® NEO B107 and B109 – Anvil adjustment for open end RIVKLE® blind rivet nutsQUICKLOC® Solid – Quick acting fasteners
Böllhoff Group |

Fitting the PULLPLUG™- RST series

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER