Uploaded July 2016 | Updated September 2026, 1 week ago

---

In this video we add a duct extraction system to the OX-Metal

Thingiverse part files: thingiverse.com/thing:1688864

PARTS:
4x 688-2rs bearings: goo.gl/fCIbRj
2x 45mm Hose clamps
2x M8x80mm bolts (Hardware store)
4x M8 nuts (Hardware store)
4x M8 washers (Hardware store)
7x M5x8mm low profile cap screws: goo.gl/TV9D5e
1x M5x30mm low profile cap screw: goo.gl/TV9D5e
1x M5 nyloc nut (Hardware store) OR goo.gl/C6eVhv
7x V-Slot tee nuts: goo.gl/FYtCB9 OR 7x Drop in tee nuts: goo.gl/bEkTg6
1x 3x10mm pan head screw (Hardware store)
1x 7mm I.D, 10mm long spring, 0.3mm wire dia (Hardware store)
Alloy flat bar 20x4mm (or thicker) 250mm long (Hardware store)
PVC 90d elbow 32mm O.D (Hardware store)

length of 32mm I.D vacuum hose

Information provided in this video is for educational purposes only.
If you attempt to recreate/replicate anything you’ve seen in this Or any other video, you’re doing so at your own risk.

- Schematix -