Scott Yu-Jan | First 24 Upgrades for my Ender 3 Pro - Part 1 @ScottYuJan | Uploaded July 2020 | Updated October 2024, 3 hours ago.
Part 2 - youtu.be/uBfMoOqCgPc
Part 3 - youtu.be/4jk6kZIwsQA
Part 4 - youtu.be/EQJfDLENYnU
My Shop: scottyujan.com
All music by Cameron Luck: tinyurl.com/camluckyoutube
My Instagram: instagram.com/scottyujan
If you decide to buy an Ender 3 Pro or other products from Creality, please consider using my affiliate link to help support my channel:
Creality (cheaper) - bit.ly/3kcSKz0
Amazon - amzn.to/3tkOzpk
♥ Support my Channel ♥
• My Shop: scottyujan.com
• Paypal - https://rotf.lol/paypalme
• Coffee - https://rotf.lol/coffeeme
Some links below are affiliate links. It doesn't cost you extra to buy through those and I just get a tiny commission. Thank you!
Tools and Hardware:
My favorite tools of 2022 breakdown - youtu.be/AYy8RFcN_ds
Bolts and Nuts used:
amzn.to/3iV8BSP
Filament:
Red PLA - amzn.to/30Bt0DR
Red PETG - amzn.to/3t93diA
STLs / tutorials / resources for all upgrades:
1 - LCD screen cover
- tinyurl.com/p1cover
2 - LCD circuit cover
- tinyurl.com/p1lcdcover
3 - Control knob with skirt
- tinyurl.com/p1cknob
4 - V-slot covers
- tinyurl.com/p1vslot
5 - Minimal scraper holder
- tinyurl.com/p1scraper
6 - Front rail cover
- tinyurl.com/p1railcover
7 - Ender 3 pro power supply fan baffler
- tinyurl.com/p1psufan
8 - Z-axis motor spacer
- tinyurl.com/p1spacer
9 - Lead screw stabilizer
- No longer recommended! I learned that trying to stabilize the lead screw can actually risk more ghosting and issues. Thanks to @kiemplant for sharing this explanation video youtu.be/2Z7mZVvPlc8?t=480
10 - Z-axis knob
- tinyurl.com/p1zknob
11 - Filament guide
- tinyurl.com/p1fguide
- bearings - amzn.to/3tElzbD
12 - Cable chains
- Original tutorial from the designer: youtube.com/watch?v=1bXfoMN2F5s
- tinyurl.com/p1chains
13 - Dual drawer
- tinyurl.com/p1drawers
- NOTE: No support materials are needed for this. Print with the openings of each part facing up!
14 - Bed handles
- tinyurl.com/p1handles
15 - Glass bed
- amzn.to/2PoU0RJ
16, 17 - Bed springs and leveling knobs
- amzn.to/3fz1xrr
18 - SD card adapter holder
- eBay: ebay.us/2URJRr (cheapest
- Amazon: amzn.to/2EVvA0d
- My remix: tinyurl.com/p1sdholder
- Original: tinyurl.com/p1sdog
- 90 degree USB adapter: amzn.to/3mJyze0
19 - All metal dual gear extruder
- Creality: creality3dofficial.com/products/creality-cr-10s-pro-bondtech-double-gear-extruder-kit?_pos=4&_sid=f08f37850&_ss=r&&sca_ref=347606.p0hfBsWyg1&sca_source=24extruder
- Amazon: amzn.to/3i4aASU
- Banggood: banggood.app.link/iXcZ8h6Ee8
- E-step calibration tutorial: youtu.be/xzQjtWhg9VE
20 - Bowden tubing
- Creality: bit.ly/2Pp7AV3
- amzn.to/3fFBD5G
- I heard capicorn ones are better so here's a link to that too:
- Amazon: amzn.to/2DdyvRrFittings/dp/B086YPDHMF
- Luke Hatfield's hotend fix:
- Video tutorial: youtu.be/7tCxO17XZtw
- Original STL: thingiverse.com/thing:3203831
- STL I used: thingiverse.com/thing:4220059
21 - BL touch
- tinyurl.com/p1bltouch
- Tutorial: bit.ly/3pxpuVB
- Amazon: amzn.to/3gteYL6
- For stock main board: creality3dofficial.com/products/creality-bl-touch
22 - SKR mini E3 V1.2
- Full guide: youtu.be/ikHhzOIlHPg
- Amazon: amzn.to/3zm2tLh (make sure to get an E3 version)
- There are newer versions of this available but from what I've heard there are still some issues being worked out
- Banggood: banggood.app.link/RoamFVijg8
23 - LED lights
- LED lights got discontinued. Watch part 2 for updates on this one: youtu.be/uBfMoOqCgPc
24 - Raspberry pi
- amzn.to/33ueyjQ
- My remixed part for Raspberry pi 4
- tinyurl.com/p1raspberry
- Original: thingiverse.com/thing:3483446
- 90 degree USB - amzn.to/3mJyze0
- Buck converters (amazon): amzn.to/35fkw97
- Buck converters (ebay): ebay.to/3m6zlkf
Leave suggestions below for other upgrades and mods and maybe I'll make a part 2.
#Ender3 #3Dprinting #Upgrades
Part 2 - youtu.be/uBfMoOqCgPc
Part 3 - youtu.be/4jk6kZIwsQA
Part 4 - youtu.be/EQJfDLENYnU
My Shop: scottyujan.com
All music by Cameron Luck: tinyurl.com/camluckyoutube
My Instagram: instagram.com/scottyujan
If you decide to buy an Ender 3 Pro or other products from Creality, please consider using my affiliate link to help support my channel:
Creality (cheaper) - bit.ly/3kcSKz0
Amazon - amzn.to/3tkOzpk
♥ Support my Channel ♥
• My Shop: scottyujan.com
• Paypal - https://rotf.lol/paypalme
• Coffee - https://rotf.lol/coffeeme
Some links below are affiliate links. It doesn't cost you extra to buy through those and I just get a tiny commission. Thank you!
Tools and Hardware:
My favorite tools of 2022 breakdown - youtu.be/AYy8RFcN_ds
Bolts and Nuts used:
amzn.to/3iV8BSP
Filament:
Red PLA - amzn.to/30Bt0DR
Red PETG - amzn.to/3t93diA
STLs / tutorials / resources for all upgrades:
1 - LCD screen cover
- tinyurl.com/p1cover
2 - LCD circuit cover
- tinyurl.com/p1lcdcover
3 - Control knob with skirt
- tinyurl.com/p1cknob
4 - V-slot covers
- tinyurl.com/p1vslot
5 - Minimal scraper holder
- tinyurl.com/p1scraper
6 - Front rail cover
- tinyurl.com/p1railcover
7 - Ender 3 pro power supply fan baffler
- tinyurl.com/p1psufan
8 - Z-axis motor spacer
- tinyurl.com/p1spacer
9 - Lead screw stabilizer
- No longer recommended! I learned that trying to stabilize the lead screw can actually risk more ghosting and issues. Thanks to @kiemplant for sharing this explanation video youtu.be/2Z7mZVvPlc8?t=480
10 - Z-axis knob
- tinyurl.com/p1zknob
11 - Filament guide
- tinyurl.com/p1fguide
- bearings - amzn.to/3tElzbD
12 - Cable chains
- Original tutorial from the designer: youtube.com/watch?v=1bXfoMN2F5s
- tinyurl.com/p1chains
13 - Dual drawer
- tinyurl.com/p1drawers
- NOTE: No support materials are needed for this. Print with the openings of each part facing up!
14 - Bed handles
- tinyurl.com/p1handles
15 - Glass bed
- amzn.to/2PoU0RJ
16, 17 - Bed springs and leveling knobs
- amzn.to/3fz1xrr
18 - SD card adapter holder
- eBay: ebay.us/2URJRr (cheapest
- Amazon: amzn.to/2EVvA0d
- My remix: tinyurl.com/p1sdholder
- Original: tinyurl.com/p1sdog
- 90 degree USB adapter: amzn.to/3mJyze0
19 - All metal dual gear extruder
- Creality: creality3dofficial.com/products/creality-cr-10s-pro-bondtech-double-gear-extruder-kit?_pos=4&_sid=f08f37850&_ss=r&&sca_ref=347606.p0hfBsWyg1&sca_source=24extruder
- Amazon: amzn.to/3i4aASU
- Banggood: banggood.app.link/iXcZ8h6Ee8
- E-step calibration tutorial: youtu.be/xzQjtWhg9VE
20 - Bowden tubing
- Creality: bit.ly/2Pp7AV3
- amzn.to/3fFBD5G
- I heard capicorn ones are better so here's a link to that too:
- Amazon: amzn.to/2DdyvRrFittings/dp/B086YPDHMF
- Luke Hatfield's hotend fix:
- Video tutorial: youtu.be/7tCxO17XZtw
- Original STL: thingiverse.com/thing:3203831
- STL I used: thingiverse.com/thing:4220059
21 - BL touch
- tinyurl.com/p1bltouch
- Tutorial: bit.ly/3pxpuVB
- Amazon: amzn.to/3gteYL6
- For stock main board: creality3dofficial.com/products/creality-bl-touch
22 - SKR mini E3 V1.2
- Full guide: youtu.be/ikHhzOIlHPg
- Amazon: amzn.to/3zm2tLh (make sure to get an E3 version)
- There are newer versions of this available but from what I've heard there are still some issues being worked out
- Banggood: banggood.app.link/RoamFVijg8
23 - LED lights
- LED lights got discontinued. Watch part 2 for updates on this one: youtu.be/uBfMoOqCgPc
24 - Raspberry pi
- amzn.to/33ueyjQ
- My remixed part for Raspberry pi 4
- tinyurl.com/p1raspberry
- Original: thingiverse.com/thing:3483446
- 90 degree USB - amzn.to/3mJyze0
- Buck converters (amazon): amzn.to/35fkw97
- Buck converters (ebay): ebay.to/3m6zlkf
Leave suggestions below for other upgrades and mods and maybe I'll make a part 2.
#Ender3 #3Dprinting #Upgrades
