Uploaded December 2022 | Updated September 2026, 2 weeks ago

---

Sikacrete®-630 Fire+ is a non-combustible gypsum-based compound, used for load bearing penetration seals in fire compartment floors. See whole product range sika.com/content/dam/dms/corporate/9/glo-passive-fire-protection-fire-resistant-linear-seals.pdf

USES
The product restores the fire resistance performance of a floor which incorporates a large variety of service penetrations such as cables, cable trays, metal pipes and plastic pipes.

ADVANTAGES
Up to 4 hours fire resistance
1-part easy to mix, easy to apply
Pourable and trowelable application
Load-bearing and self-supporting in floor penetrations
Very fast setting, no loss of volume
Provides acoustic insulation

SUSTAINABILITY
VOC emission classification GEV-EMICODE EC 1PLUS
Conformity with LEED v4 EQc 2: Low-Emitting Materials
APPROVALS/CERTIFICATES

CERTIFICATES
- CE Marking and Declaration of Performance to European Technical Assessment ETA 21/1033, based on EAD 350454-00-1104:2017 - Fire stopping and fire sealing products, penetration seals
- Fire Resistance EN 13501-2, UL-EU, Certificate No.UL-EU-01217-CPR

00:00 - 00:04 Intro
00:05 - 00:24 Shuttering Installation
00:25 - 00:52 Stone Wool Board Installation
00:53 - 01:03 Installation of SikaSeal®-629 Fire Wrap+
01:04 - 01:19 Mixing of SikaCrete®-630 Fire+
01:20 - 01:25 Cleaning
01:26 - 01:31 Moisten Surface
01:32 - 01:56 Pour SikaCrete®-630 Fire+ into Aperture
01:57 - 02:08 Product graphic
02:09 - 02:23 Outro