Fidget spinner pushed by an electromagnetic coil @ElectricExperimentsRobert33
Fidget spinner pushed by an electromagnetic coil  @ElectricExperimentsRobert33
Uploaded January 2018 | Updated November 2026, 3 hours ago
To replicate: Enamelled copper wire 0.4mm 180 turns. Total diameter coil 35mm. - Reed switch - Alkaline battery 1.5V - Switch - Three neodymium magnets 20x4mm- Wooden base 150X100mm - Two 8OX10mm wooden rods - Wooden rods 50X10mm - Fidget spinner - Reed Switch - https://www.ebay.it/sch/i.html?_odkw=interruttore+red+lamelle&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR2.TRC1.A0.H0.X.TRS0&_nkw=Reed+switch&_sacat=0
* Functioning Reed Switch: the reed switch is an electrical switch operated by an magnetic field. It consists of a pair of ferromagnetic flexible metal reeds contacts in a hermetically sealed glass envelope. The contacts are usually open, closing when a magnetic field is present, or they may be normally closed and open when a magnetic field is applied. The switch may be actuated by an electromagnetic coil, making a reed relay or by bringing a permanent magnet near the switch. When the magnetic field is removed, the reeds in the reed switch return to their original position.
Fidget spinner pushed by an electromagnetic coilThree water heating systems in comparisonHigh Voltage Microwave Transformers MOT ExperimentHigh voltage electric pinwheel testMagnets and current Generator with rotating Electric MotorSmall alternator 220 volts & motor generatorElectric Boat without batteries, test in seaElectrolytic Capacitors in Short Circuit explosionsNeodymium current generators magnetsMagnetic Induction coil voltageEnergy salt water 1°Salt water electric conductivity Test
Experiments Robert33 |

Fidget spinner pushed by an electromagnetic coil

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER