Uploaded November 2022 | Updated September 2026, 4 hours ago
How to install fender duct air vents on a C5 Corvette, detailed guide.
NOTE:
The wood blocks I used are a joke. Get some good pieces of 2x6 lumber from your local hardware store. I used rubber mats under the front blocks because they always slide, but you could use floor mats or something similar.
LINKS:
Fender ducts: electronsportusa.com/corvette-c5-products/nwznc8hvna0t6mwimj5d2q8fnq16j7
Metal mesh: amzn.to/3NAjlFB
Metal clips: amzn.to/3he1wA3
Torque wrench: amzn.to/3HqCZjq
Socket wrench set: amzn.to/3EP9kBW
Electric screwdriver: amzn.to/3Hoafrt
Tin snips: amzn.to/3t2P7l2
Needle nose pliers: amzn.to/3L7jvCv
Tiny flat head screwdriver: amzn.to/3sbUm0L
Pick set: amzn.to/3Xe2tJ8
Drill bit set: amzn.to/3grtyUJ
Magnetic bowl: amzn.to/3HsWtnA
Impact driver: amzn.to/3tC97vN
Impact wrench: amzn.to/3hJGA3S
Low profile ramps: amzn.to/41Lgi2u
Floor jack: amzn.to/37D10qc
Jack stands: amzn.to/3Pz5NN3
Drop light: amzn.to/3uoiwIo
Rolling stool: amzn.to/36KSJQZ
Creeper: amzn.to/3sgEE4q
Rags: amzn.to/3J6prtT
Gloves: amzn.to/36WLk1b
Marker: amzn.to/32Vys9v
Degreaser: amzn.to/3E3GTPL
C5 Body Kit: amzn.to/3wGCJIS
Amazon Prime Student Discount: amzn.to/3YzZNXk
Amazon Prime Discount for people with SNAP, Medicaid, etc.: amzn.to/3sfQpvW
Want to help the channel grow?
Support me on SubscribeStar: subscribestar.com/endless-money-pits
Support me on Patreon: patreon.com/EndlessMoneyPits
Check out my merch!: endless-money-pits.myspreadshop.com
Or make a one-time donation: paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS AND SUPPLIES USED:
• Torque wrench
• 19mm socket
• 7mm socket
• Electric screwdriver
• Tin snips
• Needle nose pliers
• Tiny flat head screwdriver
• A pick
• 3/16” drill bit
• Magnetic bowl
• Impact driver
• Impact wrench
• Jack
• Jack stands
• A light
• A stool
• Creeper
• Wood blocks
• Rubber mats
• A rag
• Gloves (padded)
• A marker
• Degreaser
Music not provided by YouTube:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
How to install fender duct air vents on a C5 Corvette, detailed guide.
NOTE:
The wood blocks I used are a joke. Get some good pieces of 2x6 lumber from your local hardware store. I used rubber mats under the front blocks because they always slide, but you could use floor mats or something similar.
LINKS:
Fender ducts: electronsportusa.com/corvette-c5-products/nwznc8hvna0t6mwimj5d2q8fnq16j7
Metal mesh: amzn.to/3NAjlFB
Metal clips: amzn.to/3he1wA3
Torque wrench: amzn.to/3HqCZjq
Socket wrench set: amzn.to/3EP9kBW
Electric screwdriver: amzn.to/3Hoafrt
Tin snips: amzn.to/3t2P7l2
Needle nose pliers: amzn.to/3L7jvCv
Tiny flat head screwdriver: amzn.to/3sbUm0L
Pick set: amzn.to/3Xe2tJ8
Drill bit set: amzn.to/3grtyUJ
Magnetic bowl: amzn.to/3HsWtnA
Impact driver: amzn.to/3tC97vN
Impact wrench: amzn.to/3hJGA3S
Low profile ramps: amzn.to/41Lgi2u
Floor jack: amzn.to/37D10qc
Jack stands: amzn.to/3Pz5NN3
Drop light: amzn.to/3uoiwIo
Rolling stool: amzn.to/36KSJQZ
Creeper: amzn.to/3sgEE4q
Rags: amzn.to/3J6prtT
Gloves: amzn.to/36WLk1b
Marker: amzn.to/32Vys9v
Degreaser: amzn.to/3E3GTPL
C5 Body Kit: amzn.to/3wGCJIS
Amazon Prime Student Discount: amzn.to/3YzZNXk
Amazon Prime Discount for people with SNAP, Medicaid, etc.: amzn.to/3sfQpvW
Want to help the channel grow?
Support me on SubscribeStar: subscribestar.com/endless-money-pits
Support me on Patreon: patreon.com/EndlessMoneyPits
Check out my merch!: endless-money-pits.myspreadshop.com
Or make a one-time donation: paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS AND SUPPLIES USED:
• Torque wrench
• 19mm socket
• 7mm socket
• Electric screwdriver
• Tin snips
• Needle nose pliers
• Tiny flat head screwdriver
• A pick
• 3/16” drill bit
• Magnetic bowl
• Impact driver
• Impact wrench
• Jack
• Jack stands
• A light
• A stool
• Creeper
• Wood blocks
• Rubber mats
• A rag
• Gloves (padded)
• A marker
• Degreaser
Music not provided by YouTube:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
