Uploaded April 2015 | Updated November 2026, 57 minutes ago
This video presents results with a Nonlinear Model Predictive Control for the Multicopter Attitude Tracking on SO(3). The controller is implemented on-board an Ascending Technologies Firefly Micro Aerial Vehicle at the Autonomous Systems Lab ( http://www.asl.ethz.ch/ ), ETH Zurich.
The aerial robot has a hexacopter configuration and in the particular test a propeller is removed. The controller exploits the full control allocation capabilities of the platform and manages to retain stability and tracking properties for the position and the altitude control of the vehicle while the yaw angles is left unregulated.
This video presents results with a Nonlinear Model Predictive Control for the Multicopter Attitude Tracking on SO(3). The controller is implemented on-board an Ascending Technologies Firefly Micro Aerial Vehicle at the Autonomous Systems Lab ( http://www.asl.ethz.ch/ ), ETH Zurich.
The aerial robot has a hexacopter configuration and in the particular test a propeller is removed. The controller exploits the full control allocation capabilities of the platform and manages to retain stability and tracking properties for the position and the altitude control of the vehicle while the yaw angles is left unregulated.

![[WACV 2026] Towards Fast and Scalable Normal Integration using Continuous Components
This is the accompanying video of our WACV 2026 paper Towards Fast and Scalable Normal Integration using Continuous Components.
Paper: https://arxiv.org/abs/2510.11508
Code: https://github.com/francescomilano172/normal_integration_continuous_components
Abstract:
Surface normal integration is a fundamental problem in computer vision, dealing with the objective of reconstructing a surface from its corresponding normal map. Existing approaches require an iterative global optimization to jointly estimate the depth of each pixel, which scales poorly to larger normal maps. In this paper, we address this problem by recasting normal integration as the estimation of relative scales of continuous components. By constraining pixels belonging to the same component to jointly vary their scale, we drastically reduce the number of optimization variables. Our framework includes a heuristic to accurately estimate continuous components from the start, a strategy to rebalance optimization terms, and a technique to iteratively merge components to further reduce the size of the problem. Our method achieves state-of-the-art results on the standard normal integration benchmark in as little as a few seconds and achieves one-order-of-magnitude speedup over pixel-level approaches on large-resolution normal maps.
Reference:
Francesco Milano, Jen Jen Chung, Lionel Ott, Roland Siegwart, Towards Fast and Scalable Normal Integration using Continuous Components, IEEE/CVF Winter Conference on Applications of Computer Vision (WACV), 2026.
Affiliations:
Autonomous Systems Laboratory, ETH Zurich.
The University of Queensland. [WACV 2026] Towards Fast and Scalable Normal Integration using Continuous Components](https://i.ytimg.com/vi/dZQAswCNM2E/mqdefault.jpg)








