Uploaded January 2021 | Updated November 2026, 3 hours ago
Happy New Year Fixer Family!! I am so excited to share this project with you! I have wanted to do this for so long & I am so glad I finally did this. I am also excited to be sharing this with you!! This project is really a simple build. I know you will love it as well!! Below I have all the supplies listed for you as well as the cuts on your wood that you will need!! So lets get busy.....
*Keep Lookin Up Cause That's Where It All Is!*
Supply List:
Measuring tape
Pencil
Miter saw
Wood clamps
Nail gun – I use a Ryobi Nail gun
Drill (if you want to use screws instead of nails)
2 – 2 x 2 x 8 (large lantern)
1 – 1 x 4 x 6 (large lantern)
2 inch 18G brad nails
1 1/4 inch 18G brad nails
Wood glue
Wood filler – I use Elmer’s Wood Filler in Natural
Sander or sand paper
Paint (if you are painting)
Wood stain (Rustoleum Gel Stain)
Sealer (if using outside)
Cuts for wood:
4 – 2 x 2s cut at 21 1/2 inches (vertical side supports)
8 – 2 x 2s cut at 7 1/2 inches (horizontal top and bottom supports)
4 – 2 x 2s cut at 1 1/2 inches (feet)
3 – 1 x 4s cut at 10 1/2 inches (bottom)
2 – 2 x 2s cut at 9 inches (long pieces of crown)
2 – 2 x 2s cut at 6 inches (short pieces of crown)
*********************************
CONNECT*WITH*ME
😁FACEBOOK: facebook.com/FixinToAL
📸INSTAGRAM: instagram.com/FixinToAL
🐥TWITTER: twitter.com/FixinToAL
💌EMAIL: fixintoal@gmail.com
******************************
Happy New Year Fixer Family!! I am so excited to share this project with you! I have wanted to do this for so long & I am so glad I finally did this. I am also excited to be sharing this with you!! This project is really a simple build. I know you will love it as well!! Below I have all the supplies listed for you as well as the cuts on your wood that you will need!! So lets get busy.....
*Keep Lookin Up Cause That's Where It All Is!*
Supply List:
Measuring tape
Pencil
Miter saw
Wood clamps
Nail gun – I use a Ryobi Nail gun
Drill (if you want to use screws instead of nails)
2 – 2 x 2 x 8 (large lantern)
1 – 1 x 4 x 6 (large lantern)
2 inch 18G brad nails
1 1/4 inch 18G brad nails
Wood glue
Wood filler – I use Elmer’s Wood Filler in Natural
Sander or sand paper
Paint (if you are painting)
Wood stain (Rustoleum Gel Stain)
Sealer (if using outside)
Cuts for wood:
4 – 2 x 2s cut at 21 1/2 inches (vertical side supports)
8 – 2 x 2s cut at 7 1/2 inches (horizontal top and bottom supports)
4 – 2 x 2s cut at 1 1/2 inches (feet)
3 – 1 x 4s cut at 10 1/2 inches (bottom)
2 – 2 x 2s cut at 9 inches (long pieces of crown)
2 – 2 x 2s cut at 6 inches (short pieces of crown)
*********************************
CONNECT*WITH*ME
😁FACEBOOK: facebook.com/FixinToAL
📸INSTAGRAM: instagram.com/FixinToAL
🐥TWITTER: twitter.com/FixinToAL
💌EMAIL: fixintoal@gmail.com
******************************










