Uploaded April 2015 | Updated November 2026, 3 days ago
I want to talk about in this video how I started to over think a problem on my truck. this is on my F 150 but of course this pertains to pretty much any vehicle of this era and newer. the truck had an intermittent miss at low rpm under load in the higher gear such as third gear or overdrive. from my past experience I had a problem with the vacuum leak and I actually did a video of that which a link is included in the video that you're currently watching. so I assume that my problem had to do with some of the fuel injection components that were on the engine. but after thinking about it for a short time and realizing that most of the components were in good functional shape I found that my miss was contributed to a basic state of tune problem specifically the distributor cap
and rotor and also the spark plugs. with those items being swapped out for new the problem ceased to exist on the truck and I thought that it might be fitting to provide a video making sure that other people don't fall into the same trap of over analyzing such
a simple solution. thanks for watching!
I want to talk about in this video how I started to over think a problem on my truck. this is on my F 150 but of course this pertains to pretty much any vehicle of this era and newer. the truck had an intermittent miss at low rpm under load in the higher gear such as third gear or overdrive. from my past experience I had a problem with the vacuum leak and I actually did a video of that which a link is included in the video that you're currently watching. so I assume that my problem had to do with some of the fuel injection components that were on the engine. but after thinking about it for a short time and realizing that most of the components were in good functional shape I found that my miss was contributed to a basic state of tune problem specifically the distributor cap
and rotor and also the spark plugs. with those items being swapped out for new the problem ceased to exist on the truck and I thought that it might be fitting to provide a video making sure that other people don't fall into the same trap of over analyzing such
a simple solution. thanks for watching!










