Learn how to use Buttons with LED backlight with Arduino UNO. This is a perfect tutorial for beginners, and shows how to use Arduino pin as inputs (for buttons) and outputs (for LEDs). Once you are familiar with buttons and LEDs, we will spice up the project with SSD1306 IIC 128x64px OLED display to show the visual representation of buttons and LEDs. Library for drawing on the OLED display is u8g2. All the images are created in online editor Photopea, and converted to arrays using the image2cpp online converter.
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to use Buttons with LED backlight with Arduino UNO. This is a perfect tutorial for beginners, and shows how to use Arduino pin as inputs (for buttons) and outputs (for LEDs). Once you are familiar with buttons and LEDs, we will spice up the project with SSD1306 IIC 128x64px OLED display to show the visual representation of buttons and LEDs. Library for drawing on the OLED display is u8g2. All the images are created in online editor Photopea, and converted to arrays using the image2cpp online converter.
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to create a simple dashboard using Arduino, Nextion display, and Sparkfun OBDII to UART board for getting a realtime data from your car using the OBDII connector.
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
------------------------------------------------------Arduino Keypad with components from TEMU: Any Good?upir2024-10-12 | Arduino Keypad with components from TEMU #temu #arduino #temureview Source files: github.com/upiir/arduino_keypad (New Temu App New Only) - Download Temu app using my link and Search my code: dnq9549 on app search-bar to purchase one of my picks for €1: temu.to/k/e38lcniknm7 (For All Users) Download Temu app using my link to get €100 coupon bundle for free: temu.to/k/e9e855o0glx
It is better to buy a cheap Arduino UNO, or the more expensive one? Here I will show you a few Arduino UNO boards that I have and use. What is your favorite Arduino UNO board?
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
------------------------------------------------------Custom Front Panels for Electronic Projects Using Longer Nano Pro 12Wupir2024-10-01 | Longer Nano Pro 12W: bit.ly/3Y4YLUJ Use coupon "UPIR100" to save $100 Source files: github.com/upiir/custom_front_panels
Learn how to create a custom front panels for your electronic projects using coated aluminium sheets together with the engraving laser Longer Nano Pro.
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to create the 3 gauges display from the Ford Focus RS using the intelligent display from DWIN together with the Arduino UNO. The gauges show the oil temperature, turbo boost and oil pressure. Both the EU version (pressure in Bar and temperature in °C) and the US version (pressure in PSI and temperature in °F) are included.
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to create a the simplest possible custom 7-segment display using NeoPixel strip, Arduino UNO and 3D printed enclosure. No soldering required.
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to use a custom gear indicator with the SimHub application to show the gear for any racing game. You can put this display anywhere you want, including inside the shifter knob itself. This is part 5 of the custom gear indicator series, please watch the previous videos if you want to know all the details.
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to use Pimoroni 5x5 RGB LED Matrix display connected to Arduino UNO to show a current gear for the manual transmission car. Please watch also previous three videos to understand all the details.
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to create a custom made 3D printed shifter knob that shows the current gear using Pimoroni 11x7 LED Matrix display connected to Arduino UNO. Please watch also part one and part two to understand all the details.
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to use NeoPixel rings with Arduino UNO and a rotary encoder. NeoPixels are great, because you need only one data wire to control any number of pixels you want, allowing to show any color. This simplifies the wiring and with a great library from Adafruit, the coding is simple as well. I hope to continue with this project in the future and create my own NeoPixel ring, using smaller NeoPixels to fit more pixels around the circle.
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to create a simple gear indicator for the manual transmission of the car. For that, we will use Arduino UNO with SSD1306 128x64px IIC OLED screen and 4 Hall Sensors to measure the magnetic field of the magnet placed on the shifter handle. All the images are drawn in Photopea and converted into C-style arrays using the Image2cpp utility. For a WOKWI simulation, potentiometers are used instead of Hall sensors for testing (since WOKWI does not support Hall sensors). We will also create a custom PCB in KiCad and manufacture it by PCBWay. If you want to follow along, having some wires and a breadboard is helpful. Good luck with your project!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to spice up your project with potentiometer by using transparent potentiometer that can shine! All this is done by placing a 3mm LED inside the potentiometer, since it has the hollow shaft made from transparent plastic. And if you add transparent knob on top of it, it will look great. In this video, I will also show you how you can create a custom PCB in a form of an Arduino UNO shield.
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to create simple clock using Arduino UNO R3, 128x64 SSD1306 IIC OLED Display, and DS1307 real time clock module to show time using faux segmented digits. The designs are from my previous video, where I have used designs from YouTuber "posy" and turned them into real displays.
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
I have turned segmented displays designs from youtuber Posy into real displays - and not just any displays, but displays that are thin, flexible, and act like the e-ink, meaning you can disconnect them from the power, and they will still show the content for a few minutes.
The displays were manufactured by company Ynvisible, and I´m using Arduino UNO R4 with the DAC (digital to analog converter) capability to drive those displays without any in-between driver board. The UNO R4 is needed because those displays require voltage of around 1.5V, and Arduino boards often times work with either 3.3V or 5V.
Learn how to create a DIY LED ring light for potentiometer/rotary encoder and Arduino, driven by MAX7219 multiplexing chip. I will create a custom PCB in KiCad, and order it together with SMD assembly from PCBWay. The only part that I need to hand solder are the header pins. This module uses 32 SMD LEDs sized 0402 - those are very small and they would be hard to solder by hand. Is my DIY LED ring light cheaper compared to the one that you can buy on AliExpress? Well, it depends. It is slightly cheaper if you order 10 pieces, but it would be much cheaper for higher quantities.
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
In this project, I will show you how to create 100 custom themes for an IPS Tube Clock in a very short amount of time - actually, only 1 hour! Using AI tool for generating images will surely help.
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
------------------------------------
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to control the LED ring light that should be placed around the Rotary Encoder or Potentiometer, and has 32 small yellow LEDs - 31 tickmarks and one dot. This time, we will be using the multiplexing chip MAX7219, that can be bought very cheaply together with PCB and all the required components. We will create a custom PCB in KiCad to place the LED ring light and Potentiometer and replace the 8x8 LED Matrix Display.
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to control the LED ring light that should be placed around the Rotary Encoder or Potentiometer, and has 32 small yellow LEDs - 31 tickmarks and one dot. Since Arduino UNO only has 14 digital pins, we need to use multiplexing to controll all 32 LEDs. Those LEDs are connected as 4 groups with common cathodes, so we will use 8+4=12 wires, and 12 digital pins on Arduino UNO.
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to create the simplest possible game using the Arduino-compatible chip, the ATtiny85, together with the SSD1306 128x64px IIC OLED display, one pushbutton, one resistor, a breadboard, and a few wires.
This project is as simple as possible, but it´s a good starting point for developing more complex games. We will run it on both the breadboard, as well as on the Tinycade handheld game console. The library used for drawing images on the display is U8x8, which is a very simplified version of the u8g2 library. For graphics, we use online graphics editor Photopea, to convert images into C code we use image2cpp website, and to test the project, we use WOKWI, free online arduino emulator.
Finally, when it´s time to upload the project on the ATtiny85 chip, we need some kind of programmer. Last time, I was using USBtinyISP, but this time, we will use Arduino UNO. Hope you like this tutorial and good luck with creating your own game!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
In this video, I explore the "TINYCADE" - small 8bit arcade handheld machine using ATtiny85 and SSD1306 OLED display, that could be programmed with Arduino. Hopefully next time, I will create a proper game!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Learn how to use the OLED SSD1320 160x80px connected to Arduino UNO using either the IIC or SPI connection. This display is very unusal and at certain angles, looks like a mirror.
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
-------------------------------------------------------------------------------------------------------- Learn how to create a custom Pitch and Roll indicator using the microbit board and the Nextion intelligent display. --------------------------------------------------------------------------------------------------------
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
I'm excited to share Arduino's latest innovation - the new display shield for the Arduino Giga R1 Wi-Fi board. What sets this apart is how it attaches from the bottom, giving you full access to all the board's pins.
The display boasts an impressive 800x480 pixel resolution, and it looks like it's rocking an IPS screen for those great viewing angles.
In the video, I walk you through displaying a cool image on the screen, but for more graphics creation details, check out my older video linked in the description.
Besides the display, this shield packs a capacitive touch screen, gyroscope, accelerometer, camera connector, microphone, and an RGB LED. I even show you how to control that RGB LED using the Arduino IDE.
We explore the touch screen with some touch event demos and dive into displaying images, all thanks to the lvgl library. You'll get to see the Arduino logo and more in action.
Finally, I demonstrate displaying a full-screen image, and I've got big plans for more content using this awesome display. If you have any specific requests or thoughts on the display, please drop them in the comments.
Stay tuned for more exciting projects with this display, and thanks for watching!
In this tutorial, I will show you how to effortlessly display stunning images on a 128x128 OLED screen using Arduino Uno and the WOKWI emulator. With recent support added for this "high-resolution" display, you'll learn how to integrate it seamlessly into your projects. I simplify the process step by step, from creating your image using a free online editor to coding for the display.
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
--------------------------------------------------------------------------------------------------------Image to LCD in 9.4248 secondsupir2023-09-08 | Do you like video? Please consider buying me coffee, thanks! buymeacoffee.com/upir SOURCE FILES: github.com/upiir/pixl_js_images Pixl.js about: espruino.com/Pixl.js
--------------------------------------------------------------------------- Learn how to display an (pixel art) image on the display using the Pixl.js board. Since the IDE is running in the browser and the uploading is done via Bluetooth, it would be a question of seconds! ---------------------------------------------------------------------------
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Alternative titles: Show Images on LCD Display in 10 Seconds (Pixl.js) Display Image on LCD Display in 10 SECONDS: Pixl.JS Show Images on 128x64 LCD Display in 10 Seconds using Pixl.JSArduino OLED Custom Fonts (tutorial for beginners, u8g2 library, SSD1306, IIC, SSD1309, UNO)upir2023-09-06 | Do you like video? Please consider buying me coffee, thanks! buymeacoffee.com/upir SOURCE FILES: github.com/upiir/u8g2_custom_fonts WOKWI SKETCH: wokwi.com/projects/375125168784452609
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
In this project, I will show you how to show a simple animation using Arduino UNO and OLED display (SSD1306 IIC OLED). The graphics library for drawing images is u8g2 and Adafruit GFX. Enjoy!
PCBWay is a service for manufacturing custom PCBs. If you click the link above, you will get a coupon for $5, which is exactly the price of 10 pieces of custom PCBs. In that case, you will only pay for shipping. Do you have any experience doing this? Please let me know in the comment section!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!
Please follow me in this video to see how I have created very simple CNCed part. This is a simple metal case (enclosure) for a rotary encoder module from DF Robot.
Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, and reading the video description and I hope to see you next time. Good luck with your projects!
Alternative titles: My First CNC Metal Enclosure - Fusion 360 + Arduino How to create 1st CNC Metal Case & Enclosure for Arduino - Fusion 360 My First CNC Metal Case Enclosure - Arduino - Fusion 360 V2Custom Clocks for Smart Watchesupir2023-08-17 | Do you like video? Please consider buying me coffee, thanks! buymeacoffee.com/upir Source files: github.com/upiir/banglejs2_custom_clocks
In this video, I walk you through the process of creating personalized clock faces for Bangle.JS smartwatches, with a keen focus on making them visually striking. I start by unpacking the Bangle.JS watches and highlighting their key attributes, such as the LCD display, sensors, and touch functionality.
I emphasize the significance of Bluetooth connectivity for these watches and detail the steps involved in establishing a connection with a PC. Exploring the array of available clock applications, I then delve into the creation of a custom clock face using an online graphic editor called Photopea.
I guide you through the creation of unique numeric digits for the clock face, converting them into a specialized font, and integrating the font into an Espruino IDE sketch. Throughout the video, I provide insights into the strengths and limitations of Bangle.JS watches.
I applaud their affordability and customization potential, while also candidly addressing the readability challenges posed by their display. Your feedback on the watches and their display would be greatly appreciated, so feel free to share your thoughts in the comments section. Thank you for tuning in, and I look forward to engaging with you further.