Uploaded January 2026 | Updated November 2026, 2 days ago
Did you know most composite repairs, including fibreglass, FAIL simply because the damage was never fully removed?
ποΈ Ready to build a fast car? Enroll in the all-inclusive VIP online course package and save $400 USD: hpcdmy.co/viprepar
π‘ Get the skills you need to tackle your next composites project. $50 USD off, lifetime access and instant enrollment: hpcdmy.co/comp50
Repairing damaged composite parts correctly is critical if you want strength, durability, and a professional finish. In this video, you learn how fibreglass composite repairs are carried out using wet lay techniques, focusing on proper damage removal, backside reinforcement, correct material selection, and finishing for paint or wrap.
Using an aftermarket fibreglass bumper from a Mazda RX-7 race car, this module explains how to identify delaminated laminate, prepare the repair area safely, and rebuild strength using chop strand mat and polyester resin. You also learn why correct surface preparation, resin choice, and layer thickness matter for long term reliability in motorsport applications.
π¦π§ππ£ ππ¬ π¦π§ππ£ π£π₯π’πππ¦π¦:
Step 1: Prepare a suitable workspace and wear correct PPE.
Step 2: Clean the part and identify cracked or delaminated fibreglass.
Step 3: Grind out damaged laminate from the backside.
Step 4: Tape the front surface to prevent resin bleed-through.
Step 5: Prepare chop strand mat and mix polyester resin.
Step 6: Wet lay multiple layers on the backside repair.
Step 7: Allow the repair to cure past peak exotherm.
Step 8: Grind damaged laminate from the front side.
Step 9: Fill voids and wet lay the front side proud.
Step 10: Allow full cure, then grind and DA sand to shape.
Step 11: Apply body filler and prime for final finishing.
This is a practical, workshop focused look at composite repair techniques used on real race car components, taken directly from High Performance Academyβs Motorsport Composites Fundamentals course linked above.
--------------------
π§ππ ππ¦π§ππ π£π¦:
0:00 - Fibreglass Repair Overview
0:09 - Fibreglass vs Carbon Fibre Repairs
0:31 - Dust Control And PPE
1:03 - RX-7 Fibreglass Bumper Damage
1:23 - Cleaning And Preparation
1:34 - Identifying Delamination
2:08 - Backside Damage Removal
2:24 - Taping The Front Surface
3:06 - Chop Strand Mat Selection
3:46 - Polyester Resin And Catalyst
4:13 - Wet Lay Lamination Process
4:37 - Initial Cure Time
4:48 - Front Side Damage Removal
5:08 - Filling Voids And Low Spots
5:23 - Front Side Lamination
5:33 - Final Cure And Shaping
5:49 - DA Sanding Control
6:11 - Body Filler And Finishing
6:37 - Priming And Surface Prep
6:47 - Key Repair Principles
7:29 - Motorsport Composites Course
--------------------
FREE STUFF
π Free Race Car Parts On Us | Enter the Giveaway
hpcdmy.co/giveaway
π Start Tuning With Confidence | EFI Fuel & Ignition Basics Lesson
hpcdmy.co/EFI101y
π» How to Tune Stock ECUs Safely | HP Tuners Fuel & Ignition Lesson
hpcdmy.co/hptly
β‘ Motorsport-Grade Wiring Made Simple | Learn Essential Skills
hpcdmy.co/wiringlessonyt
π§βπ» Design. Digitise. Develop. | CAD & 3D Scanning Lesson
hpcdmy.co/learnCADnow
π§° Engine Building Basics That Matter | Watch Now
hpcdmy.co/eby
π§ Learn to Align Like a Pro | DIY String Alignment & Setup Guide
hpcdmy.co/aljyt
π» Unlock Your Dieselβs Potential | Step-by-Step Tuning Introduction
hpcdmy.co/essential-diesel-knowledge
--------------------
MERCH
π Warning: May Cause Random Tech Chats at the Track: hpcdmy.co/merchy
#highperformanceacademy #buildtunedrive #mazda #fibreglassrepair #compositerepair #wetlay #motorsportfabrication #composites
Did you know most composite repairs, including fibreglass, FAIL simply because the damage was never fully removed?
ποΈ Ready to build a fast car? Enroll in the all-inclusive VIP online course package and save $400 USD: hpcdmy.co/viprepar
π‘ Get the skills you need to tackle your next composites project. $50 USD off, lifetime access and instant enrollment: hpcdmy.co/comp50
Repairing damaged composite parts correctly is critical if you want strength, durability, and a professional finish. In this video, you learn how fibreglass composite repairs are carried out using wet lay techniques, focusing on proper damage removal, backside reinforcement, correct material selection, and finishing for paint or wrap.
Using an aftermarket fibreglass bumper from a Mazda RX-7 race car, this module explains how to identify delaminated laminate, prepare the repair area safely, and rebuild strength using chop strand mat and polyester resin. You also learn why correct surface preparation, resin choice, and layer thickness matter for long term reliability in motorsport applications.
π¦π§ππ£ ππ¬ π¦π§ππ£ π£π₯π’πππ¦π¦:
Step 1: Prepare a suitable workspace and wear correct PPE.
Step 2: Clean the part and identify cracked or delaminated fibreglass.
Step 3: Grind out damaged laminate from the backside.
Step 4: Tape the front surface to prevent resin bleed-through.
Step 5: Prepare chop strand mat and mix polyester resin.
Step 6: Wet lay multiple layers on the backside repair.
Step 7: Allow the repair to cure past peak exotherm.
Step 8: Grind damaged laminate from the front side.
Step 9: Fill voids and wet lay the front side proud.
Step 10: Allow full cure, then grind and DA sand to shape.
Step 11: Apply body filler and prime for final finishing.
This is a practical, workshop focused look at composite repair techniques used on real race car components, taken directly from High Performance Academyβs Motorsport Composites Fundamentals course linked above.
--------------------
π§ππ ππ¦π§ππ π£π¦:
0:00 - Fibreglass Repair Overview
0:09 - Fibreglass vs Carbon Fibre Repairs
0:31 - Dust Control And PPE
1:03 - RX-7 Fibreglass Bumper Damage
1:23 - Cleaning And Preparation
1:34 - Identifying Delamination
2:08 - Backside Damage Removal
2:24 - Taping The Front Surface
3:06 - Chop Strand Mat Selection
3:46 - Polyester Resin And Catalyst
4:13 - Wet Lay Lamination Process
4:37 - Initial Cure Time
4:48 - Front Side Damage Removal
5:08 - Filling Voids And Low Spots
5:23 - Front Side Lamination
5:33 - Final Cure And Shaping
5:49 - DA Sanding Control
6:11 - Body Filler And Finishing
6:37 - Priming And Surface Prep
6:47 - Key Repair Principles
7:29 - Motorsport Composites Course
--------------------
FREE STUFF
π Free Race Car Parts On Us | Enter the Giveaway
hpcdmy.co/giveaway
π Start Tuning With Confidence | EFI Fuel & Ignition Basics Lesson
hpcdmy.co/EFI101y
π» How to Tune Stock ECUs Safely | HP Tuners Fuel & Ignition Lesson
hpcdmy.co/hptly
β‘ Motorsport-Grade Wiring Made Simple | Learn Essential Skills
hpcdmy.co/wiringlessonyt
π§βπ» Design. Digitise. Develop. | CAD & 3D Scanning Lesson
hpcdmy.co/learnCADnow
π§° Engine Building Basics That Matter | Watch Now
hpcdmy.co/eby
π§ Learn to Align Like a Pro | DIY String Alignment & Setup Guide
hpcdmy.co/aljyt
π» Unlock Your Dieselβs Potential | Step-by-Step Tuning Introduction
hpcdmy.co/essential-diesel-knowledge
--------------------
MERCH
π Warning: May Cause Random Tech Chats at the Track: hpcdmy.co/merchy
#highperformanceacademy #buildtunedrive #mazda #fibreglassrepair #compositerepair #wetlay #motorsportfabrication #composites










