Experiments 5.3: 8x8 LED Dot Matrix Display Tutorial (Red/Green Common Anode) using the Arduino @DerekMolloyatDCU
Experiments 5.3: 8x8 LED Dot Matrix Display Tutorial (Red/Green Common Anode) using the Arduino  @DerekMolloyatDCU
Uploaded April 2011 | Updated November 2026, 11 hours ago
In this video a 2 Colour (red/green) 8x8 LED Dot Matrix Display circuit is developed that uses three 74HC595 ICs to drive the rows/columns and a darlington transistor array (UDN2981A) to source the current. An Arduino is used to provide the serial data and the source code is presented to show how this was achieved. The display is a common anode display and the experiment spends time examining the current constraints, explaining why we require transistor arrays to source or sink current. This experiment is a part of a module on an introduction to Digital Electronics at Dublin City University, which can be viewed at: www.eeng.dcu.ie/~molloyd/ee223/
Experiments 5.3: 8x8 LED Dot Matrix Display Tutorial (Red/Green Common Anode) using the ArduinoBeaglebone: Java Setup (JRE), Eclipse and Remote System Explorer (RSE)Experiments 5.1.2: Solution: Arduino Traffic LightsBeaglebone: Introduction to GPIOs - Using Device Tree Overlays under Linux 3.8+Experiments 2.4: Digital Logic - Karnaugh Maps (Part 1)Experiments 4.4.3: Questions: BCD Counter - Change to OctalAVR Programming - AVR Dragon IntroductionBeaglebone: Example Qt Embedded Linux ApplicationBeaglebone: LCD Touchscreen GUI Applications for Embedded LinuxThe Beaglebone - Unboxing, Introduction Tutorial and First ExampleExperiments 4.1.2: Questions: 555 Timer Experiment- Question 2
Derek Molloy |

Experiments 5.3: 8x8 LED Dot Matrix Display Tutorial (Red/Green Common Anode) using the Arduino

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER