Uploaded August 2025 | Updated November 2026, 2 days ago
Full Lecture Title — Evaluation of a Tear Mending by Digital Image Correlation (3D-DIC) and Analysis of the Impact of its Restoration on the Flatness of the Work
Presenter: Marie-Noëlle Laurent-Miri: CY Cergy Paris Université, Laboratoire Heritages, Paris Seine Graduate School of Humanities Creation Heritage
Abstract:
When we restore a tear on an easel painting, the method is often based on empirical knowledge, and the question of the flatness of the original support, the mechanical properties of the painting, and stress distribution around the tear is rarely studied. In this perspective, our research aims to analyze the mechanical phenomena involved and the behavior over time of a tear depending on the restoration treatment carried out.
The study set up jointly by the Satie laboratory of the CY Cergy Paris University and the Institut National du Patrimoine laboratory - Restoration Department, aims to study different tear consolidation systems on an easel painting. In the past in France, glue-paste lining appeared to be the best solution for preserving the flatness of a tear, but in recent years there has been a fundamental change, with the emphasis on preserving the integrity of the work and increasing application of the principle of minimal intervention. This raises the question of rigidity as a solution to the problem of flatness, and how to reconcile stability and stress reduction with maintaining the flatness and tension of the painting.
The first step of this study involved designing the most suitable samples and the different consolidation systems representative of current practices. The second step was the development of the measurement technique. To measure the stress and strain around the restored tear, 3D digital image correlation (3D-DIC) was used. This contactless technique is particularly suited for measuring in-plane and out-of-plane displacements.
It will enable the measurement of deflection at the tear and the different consolidation systems to develop tools for understanding stress fields and the mechanical behavior of the tear and its restoration, and to establish predictive models of its behavior over time.
This presentation was part of the Mechanical Insights: Shaping the Future of Museum Collection Symposium. View details and the full symposium program here: https://www.getty.edu/projects/mechanical-characterization-historic-artistic-materials/mechanical-insights-symposium/
Part of Getty Conservation Institute’s Managing Collection Environment Initiative: https://www.getty.edu/projects/managing-collection-environments-initiative/
Full Lecture Title — Evaluation of a Tear Mending by Digital Image Correlation (3D-DIC) and Analysis of the Impact of its Restoration on the Flatness of the Work
Presenter: Marie-Noëlle Laurent-Miri: CY Cergy Paris Université, Laboratoire Heritages, Paris Seine Graduate School of Humanities Creation Heritage
Abstract:
When we restore a tear on an easel painting, the method is often based on empirical knowledge, and the question of the flatness of the original support, the mechanical properties of the painting, and stress distribution around the tear is rarely studied. In this perspective, our research aims to analyze the mechanical phenomena involved and the behavior over time of a tear depending on the restoration treatment carried out.
The study set up jointly by the Satie laboratory of the CY Cergy Paris University and the Institut National du Patrimoine laboratory - Restoration Department, aims to study different tear consolidation systems on an easel painting. In the past in France, glue-paste lining appeared to be the best solution for preserving the flatness of a tear, but in recent years there has been a fundamental change, with the emphasis on preserving the integrity of the work and increasing application of the principle of minimal intervention. This raises the question of rigidity as a solution to the problem of flatness, and how to reconcile stability and stress reduction with maintaining the flatness and tension of the painting.
The first step of this study involved designing the most suitable samples and the different consolidation systems representative of current practices. The second step was the development of the measurement technique. To measure the stress and strain around the restored tear, 3D digital image correlation (3D-DIC) was used. This contactless technique is particularly suited for measuring in-plane and out-of-plane displacements.
It will enable the measurement of deflection at the tear and the different consolidation systems to develop tools for understanding stress fields and the mechanical behavior of the tear and its restoration, and to establish predictive models of its behavior over time.
This presentation was part of the Mechanical Insights: Shaping the Future of Museum Collection Symposium. View details and the full symposium program here: https://www.getty.edu/projects/mechanical-characterization-historic-artistic-materials/mechanical-insights-symposium/
Part of Getty Conservation Institute’s Managing Collection Environment Initiative: https://www.getty.edu/projects/managing-collection-environments-initiative/










