Uploaded April 2026 | Updated November 2026, 3 hours ago
In this video, I share my experience with the E1 and the importance of having extra supplies on hand. I was fortunate to receive extra ink and a cleaning cartridge, which proved essential as my initial cleaning cartridge filled up quickly. I also will follow up on my fume control system to maintain a safe environment with the Sky Enclosure and some of my results and tips for getting the most out of your ink.
π° Affiliate Disclaimer: These are affiliate links. These are my personal favorites and necessities for my art and small business. There is no cost to you when you shop using my link, but I do get a small commission if you make a purchase :)
Where you can find the Wham Bam E1 Silicon Mat Set: bit.ly/4s8hPxT
Here's the list of things I used (minus the Xtool AP2 Filter): amzn.to/4pRulQd
Chapters
00:00 Intro
00:16 Kickstarter Bonuses Rolling in
00:40 Cleaning Cartridge Notes
03:02 Things are Starting to Ship from Storeβ¦.SLOWLY
06:02 Editing Note
06:39 My Current Experiences
10:52 Cleaning Fluid vs Ink Use
11:32 Some Results and Thoughts vs Other Methods
13:02 Stickiness
13:48 Fume Control and How I My System Works
15:07 Outro
π Curious about crafting with tech? Subscribe for tutorials on laser crafting, 3D printing, and DIY experiments that make innovation fun!
youtube.com/@LabcraftStudio/?sub_confirmation=1
β Important Link to Follow
ποΈ Etsy
etsy.com/shop/labcraftstudio/?etsrc=sdt
β Stay Connected With Me.
π Instagram: instagram.com/LabcraftStudio
π Website: labcraftstudio.com
π© For Business Inquiries: sarah@labcraftstudio.com
=============================
π¬ Recommended Playlists
π Laser Cutting
youtube.com/playlist?list=PLGTxgui-75qJbAiyM9saCLaWu3c8H0nhj
π Cricut Tutorials
youtube.com/playlist?list=PLGTxgui-75qJjvdNOcwFvh6fQqY6Y1v0F
π¬ WATCH MY OTHER VIDEOS:
π How I Make 3D Printed Bookmarks Using Bambu's MakerLab - Cute Gift Ideas
youtube.com/watch?v=EH82YKxiJCA
π How To Create Full Sticker Sheets With Cricut (No Waste) Step-By-Step Tutorial!
youtube.com/watch?v=xQwhPpJzmr4
π How To Sublimate 3D Prints Directly On Plate - Easy PLA & PETG Sublimation Tips
youtube.com/watch?v=FG60jMIte5k
π Gweike Cloud Pro Laser: Is It The Best Laser Cutter? My Honest Review
youtube.com/watch?v=_h6PKID__7Y
π How I Started A 3D Printing Business: Best Guide For Small Businesses (2024)
youtube.com/watch?v=WXeMOCd0bp
=============================
#Eufymake #E1 #uvprinter #WhamBam
β οΈ Disclaimer: I do not accept any liability for any loss or damage incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your research.
π° Affiliate Disclaimer: These are affiliate links. These are my personal favorites and necessities for my art and small business. There is no cost to you when you shop using my link, but I do get a small commission if you make a purchase :)
βοΈ Copyright Notice: This video and my YouTube channel contain dialogue, music, and images that are the property of Labcraft Studio. You are authorized to share the video link and channel and embed this video in your website or others as long as a link back to my YouTube channel is provided.
Β© Labcraft Studio
In this video, I share my experience with the E1 and the importance of having extra supplies on hand. I was fortunate to receive extra ink and a cleaning cartridge, which proved essential as my initial cleaning cartridge filled up quickly. I also will follow up on my fume control system to maintain a safe environment with the Sky Enclosure and some of my results and tips for getting the most out of your ink.
π° Affiliate Disclaimer: These are affiliate links. These are my personal favorites and necessities for my art and small business. There is no cost to you when you shop using my link, but I do get a small commission if you make a purchase :)
Where you can find the Wham Bam E1 Silicon Mat Set: bit.ly/4s8hPxT
Here's the list of things I used (minus the Xtool AP2 Filter): amzn.to/4pRulQd
Chapters
00:00 Intro
00:16 Kickstarter Bonuses Rolling in
00:40 Cleaning Cartridge Notes
03:02 Things are Starting to Ship from Storeβ¦.SLOWLY
06:02 Editing Note
06:39 My Current Experiences
10:52 Cleaning Fluid vs Ink Use
11:32 Some Results and Thoughts vs Other Methods
13:02 Stickiness
13:48 Fume Control and How I My System Works
15:07 Outro
π Curious about crafting with tech? Subscribe for tutorials on laser crafting, 3D printing, and DIY experiments that make innovation fun!
youtube.com/@LabcraftStudio/?sub_confirmation=1
β Important Link to Follow
ποΈ Etsy
etsy.com/shop/labcraftstudio/?etsrc=sdt
β Stay Connected With Me.
π Instagram: instagram.com/LabcraftStudio
π Website: labcraftstudio.com
π© For Business Inquiries: sarah@labcraftstudio.com
=============================
π¬ Recommended Playlists
π Laser Cutting
youtube.com/playlist?list=PLGTxgui-75qJbAiyM9saCLaWu3c8H0nhj
π Cricut Tutorials
youtube.com/playlist?list=PLGTxgui-75qJjvdNOcwFvh6fQqY6Y1v0F
π¬ WATCH MY OTHER VIDEOS:
π How I Make 3D Printed Bookmarks Using Bambu's MakerLab - Cute Gift Ideas
youtube.com/watch?v=EH82YKxiJCA
π How To Create Full Sticker Sheets With Cricut (No Waste) Step-By-Step Tutorial!
youtube.com/watch?v=xQwhPpJzmr4
π How To Sublimate 3D Prints Directly On Plate - Easy PLA & PETG Sublimation Tips
youtube.com/watch?v=FG60jMIte5k
π Gweike Cloud Pro Laser: Is It The Best Laser Cutter? My Honest Review
youtube.com/watch?v=_h6PKID__7Y
π How I Started A 3D Printing Business: Best Guide For Small Businesses (2024)
youtube.com/watch?v=WXeMOCd0bp
=============================
#Eufymake #E1 #uvprinter #WhamBam
β οΈ Disclaimer: I do not accept any liability for any loss or damage incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your research.
π° Affiliate Disclaimer: These are affiliate links. These are my personal favorites and necessities for my art and small business. There is no cost to you when you shop using my link, but I do get a small commission if you make a purchase :)
βοΈ Copyright Notice: This video and my YouTube channel contain dialogue, music, and images that are the property of Labcraft Studio. You are authorized to share the video link and channel and embed this video in your website or others as long as a link back to my YouTube channel is provided.
Β© Labcraft Studio



