Uploaded May 2026 | Updated November 2026, 3 hours ago
We take a look at the Ettus USRP B206mini-i from NI. The low-cost, credit card-sized 70 megahertz to 6 gigahertz software-defined radio is ideal for wireless communications research, signal intelligence, spectrum monitoring, and more.
Inside the box, you’ll find the B206mini-I, a USB-C cable, rubber feet, and a torx key for removing the enclosure.
In this demo, we’re going to use the B206mini-i with the GNU Radio Companion to acquire an FM radio signal, demodulate, and output the audio. You’ll need an appropriate antenna to pickup the signal.
Connect the antenna to the RX2 port. Connect the B206mini-i to your computer using the included USB-C cable and secure it with the screw lock. To run the demo, you’ll also need to install Python, the matplotlib Python module, the USRP hardware driver, GNU Radio, and an MSVC redistributable package. Follow the installation instructions for both the Python and GNU radio examples to complete all necessary installation steps.
Navigate to the GNU Radio binaries folder, right click on gnuradio-companion.bat, and select run as administrator. This will open a flowgraph where we can add various blocks to acquire a signal, display it, demodulate it, and listen to the audio. If you can’t find a block, click the magnifying glass and you can search for it. Add the blocks detailed in the getting started guide, set your frequency and other parameters, and then hit run and you’ll get the audio from the station you’ve tuned into.
Getting Started with USRP B206mini-i and GNU Radio on Windows
learn.ni.com/learn/article/getting-started-with-usrp-b206mini-i-and-gnu-radio-on-windows
Getting Started with USRP B206mini-i and Python on Windows
learn.ni.com/learn/article/getting-started-with-usrp-b206mini-i-and-python-on-windows
digikey.com/en/products/detail/ni/789155-01/27048749
digikey.com/en/products/detail/sparkfun-electronics/13002/6161747
We take a look at the Ettus USRP B206mini-i from NI. The low-cost, credit card-sized 70 megahertz to 6 gigahertz software-defined radio is ideal for wireless communications research, signal intelligence, spectrum monitoring, and more.
Inside the box, you’ll find the B206mini-I, a USB-C cable, rubber feet, and a torx key for removing the enclosure.
In this demo, we’re going to use the B206mini-i with the GNU Radio Companion to acquire an FM radio signal, demodulate, and output the audio. You’ll need an appropriate antenna to pickup the signal.
Connect the antenna to the RX2 port. Connect the B206mini-i to your computer using the included USB-C cable and secure it with the screw lock. To run the demo, you’ll also need to install Python, the matplotlib Python module, the USRP hardware driver, GNU Radio, and an MSVC redistributable package. Follow the installation instructions for both the Python and GNU radio examples to complete all necessary installation steps.
Navigate to the GNU Radio binaries folder, right click on gnuradio-companion.bat, and select run as administrator. This will open a flowgraph where we can add various blocks to acquire a signal, display it, demodulate it, and listen to the audio. If you can’t find a block, click the magnifying glass and you can search for it. Add the blocks detailed in the getting started guide, set your frequency and other parameters, and then hit run and you’ll get the audio from the station you’ve tuned into.
Getting Started with USRP B206mini-i and GNU Radio on Windows
learn.ni.com/learn/article/getting-started-with-usrp-b206mini-i-and-gnu-radio-on-windows
Getting Started with USRP B206mini-i and Python on Windows
learn.ni.com/learn/article/getting-started-with-usrp-b206mini-i-and-python-on-windows
digikey.com/en/products/detail/ni/789155-01/27048749
digikey.com/en/products/detail/sparkfun-electronics/13002/6161747










