My Tech Fun | eSun ePLA-GF vs ePLA-CF (glass fiber vs carbon fiber PLA) @MyTechFun | Uploaded February 2024 | Updated October 2024, 4 hours ago.
Fiber reinforced filaments usually makes the material easier for 3D printing, but PLA is by default very printable filament. Let's find out what advantage we have from those glass- and carbon fibers.
Product links (not affiliate):
ePLA GF: esun3d.com/epla-gf-product
ePLA CF: esun3d.com/epla-cf-product
Results you can download from: mytechfun.com/video/344
Patreon supporters have access to summary table with all earlier results too.
patreon.com/mytechfun
Contents
0:00 Introduction
1:45 Unboxing
2:34 ePLA-GF 3D printing
3:36 ePLA-CF 3D printing
4:09 Tensile test
4:32 Layer adhesion test
4:50 Shear test
5:00 Bending test
5:29 Twist test
5:57 Impact test
6:38 Temperature test
7:20 Creep test
7:58 Results
10:00 Conclusions
#3dprinting #esun #filamenttest #plafilament
Fiber reinforced filaments usually makes the material easier for 3D printing, but PLA is by default very printable filament. Let's find out what advantage we have from those glass- and carbon fibers.
Product links (not affiliate):
ePLA GF: esun3d.com/epla-gf-product
ePLA CF: esun3d.com/epla-cf-product
Results you can download from: mytechfun.com/video/344
Patreon supporters have access to summary table with all earlier results too.
patreon.com/mytechfun
Contents
0:00 Introduction
1:45 Unboxing
2:34 ePLA-GF 3D printing
3:36 ePLA-CF 3D printing
4:09 Tensile test
4:32 Layer adhesion test
4:50 Shear test
5:00 Bending test
5:29 Twist test
5:57 Impact test
6:38 Temperature test
7:20 Creep test
7:58 Results
10:00 Conclusions
#3dprinting #esun #filamenttest #plafilament