Escape Room Design Tutorial - Blow the Bloody Doors Off! @PlayfulTechnology
Escape Room Design Tutorial - Blow the Bloody Doors Off!  @PlayfulTechnology
Uploaded August 2021 | Updated November 2026, 4 days ago
In this tutorial I'll explain how to create an escape room scenario in which players need to place explosive charges and then activate a detonator to "blast open" a door (by releasing an electromagnetic lock, accompanied by a suitable explosion sound effect). This is a commonly-used escape room effect that might be how players break into a bank vault, break out of a jail, or open the entrance to Aladdin's cave or an abandoned mine, for example.

Timings
---
00:00:00-00:00:34 Introduction and Demonstration
00:00:35-00:04:42 Mounting the maglock and door release poppers
00:04:43-00:08:15 Creating the magnetic explosive charges
00:08:16-00:10:26 Dynamite detonator mechanism
00:10:27-00:13:13 Emergency Release Switch
00:13:14-00:14:35 Components
00:14:36-00:18:58 Wiring Diagram (including DIN Relay)
00:18:59-00:25:50 Schematic
00:25:51-00:27:29 Wrapup

Components Used
---
Unlike most of my projects, this requires *no* Arduino or other microprocessor - the logic is controlled purely through relays and magnetic Reed switches. The full list of components I'm using is as follows:
- Maglock:
banggood.com/custlink/m3GdBFIvKQ

- N42 Neodymium Magnets with countersunk hole:
first4magnets.com/rectangular-c35/25-x-20-x-5mm-thick-x-4-5mm-c-s-n42-neodymium-magnet-9-8kg-pull-p3656

- 12V Automotive Relay:
ebay.co.uk/itm/154145024929

- Spring Nuts / Door poppers:
bolts.co.uk/spring-nuts-c-4522
banggood.com/custlink/3G3y05IGvd

- DFPlayer MP3 Player:
banggood.com/custlink/3m3heH8KhG

- External Amplifier:
banggood.com/custlink/GKGE4PIDyy

- 12V Regulated DC Power Supply:
ebay.co.uk/itm/162562112782

- 12V-5V DC stepdown convertor:
ebay.co.uk/itm/142407861263

- Normally Open Magnetic Reed Switch:
amazon.co.uk/sourcingmap-Recessed-Security-Contact-Magnetic/dp/B07F5XVQN2

- Large arcade push button (for dynamite plunger):
banggood.com/custlink/GGGE0F9DZv

- Normally Closed emergency exit button:
ebay.co.uk/itm/153919958885

I'm a professional game designer and have been creating escape rooms for five years, and making tutorials about them since 2017. If you enjoyed this video or found it helpful, please like and subscribe! If you'd like to check out my other escape room projects, or support me to continue making more tutorials in the future, please check out my Patreon at patreon.com/playfultech
Escape Room Design Tutorial - Blow the Bloody Doors Off!Fixing a Broken Electronic Escape Room Puzzle (Reverse Engineering + Arduino Rebuild)Unusual Interactive CLOCK Ideas!How to Build an Automated Arduino-Controlled Ouija BoardHow to create a 3D Optical Illusion Escape Room PuzzleAR Markerless Overlay DemonstrationLearn to Make Your Own Rising Pedestal Escape Room PropCreate an EPIC Treasure Hunt using BLE BeaconsCreate your own LARGE 7-segment LED display!Power Injection for Programmable LED StripsUsing Arduino with Node-RED to create a Simple Web DashboardHow to use a Digital Oscilloscope to debug Arduino Projects (or ESP8266, ESP32, Raspberry Pi etc.)
Playful Technology |

Escape Room Design Tutorial - "Blow the Bloody Doors Off!"

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER