Episode 129: Sony PVM-14n5u to PVM-14n6u RGB Mod and Restore | HDR HLG | @The_SegaHolic
Episode 129: Sony PVM-14n5u to PVM-14n6u RGB Mod and Restore | HDR HLG |  @The_SegaHolic
Uploaded November 2022 | Updated November 2026, 3 hours ago
A vlog of me and my PVM-14n5u adventures. Fixed a lot of stuff on dis bugga which was given to me by @6tanks (Twitter.) Free too! Forever grateful.

IMPORTANT!!! Forgot to add in the vid that the header label silkscreen for CN403 on the A-Board is reversed! Also, the jumper wires must be added to the sync circuit on the Q-Board. Though, I would also just add the jumpers for the remote circuit as it's easy enough.

Image and PDF files:
drive.google.com/file/d/14XugilKDjGSw2wAnulHIYrSHdEK_fzrj/view?usp=sharing

Q Board components:
75 Ohm 1/4w 1% resistor: Koa Speer MF1/4DCT52R75R0F2
2.7 kOhm SMD resistor: Panasonic ERJ-6RBD2701V
82 kOhm SMD resistor: Panasonic ERJ-6RBD8202V
100 kOhm SMD resistor: Panasonic ERJ-6RBD1003V
270 kOhm SMD resistor: Panasonic ERJ-6RED2703V
820 kOhm SMD resistor: Pansonic ERJ-6RED8203V
4.7 kOhm SMD resistor: Panasonic ERJ-6RBD4701V
10 KOhm SMD resistor: Pansonic ERJ-6RBD1002V
1 KOhm SMD resistor: Pansonic ERJ-6RBD1001V
22 Ohm SMD resistor: Susumu RR1220Q-220-D
90v Diodes: Taiwan Semiconductor 1SS133M R0G
11v Zener Diode: Nexperia NZX11D,133
100pF SMD Capacitor: Murata GRM2165C1H151JA01D
10uF Electrolytic Capacitor: Panasonic EEA-FC1E100B
PNP Tranisitor: OnSemi BC640TA
NPN Tranistor: 2SC1740S (Generic/eBay)

A Board components and parts:
75 Ohm BNC Jack: Amphenol 031-221-75RFX
50 Ohm BNC Jack: Adam Tech RF1-106-D-00-50-HDW
Tactile Switch: Panasonic EVQ-PC405K
0.1uF SMD Capacitor: Taiyo Yuden TMF212B7104KGHT
0.01uF SMD Capacitor: TDK C2012C0G1H103K060AA
10 Ohm 1/4w 5% resistor: Koa Speer CFPS1/4C100J
7-pin Straight Header: Adam Tech 25SH-C-07-TS
7-pin Right Angle Header: Adam Tech 25SH-C-07-TR
7-pin Connector: JST EHR-7
EH Connector Pins: SEH-001T-P0.6

Shout outs to phrederick for his SSM-14nxx RGB tutorial I stumbled upon when serching for the tactile switches for the A-Board. I got the tactile switch and 50 Ohm BNC jack part numbers from his tut.
github.com/phrederick/Sony-SSM-14NXX-SSM-20NXX-RGB-Modification
Episode 129: Sony PVM-14n5u to PVM-14n6u RGB Mod and Restore | HDR HLG |Gran Board 3s Custom PORTABLE / NESTING Cabinet and Lights [ Granboard ]The Definitive How To Rip and Burn Sega (Mega) CD Backups Guide [ep. 82]How To RGB Mod a JVC D-Series TV ( JVC AV-20D202 )  [ep. 105]How to Softmod / Jailbreak a Nintendo Wii & Play Backups & Emulators [ep. 59]Video Journal 004: Orphaned Zenith Health View Hospital Grade CRTsSega Saturn Yahoo! Japan Rescue via Buyee 1 [SH no.31]Nintendo Switch Pro Controller Stuck Screw - JIS vs Phillips [SH ep.106]Dos Gramos La Magistral Negro 4ba Darts UnboxingHow To Install Rocky5s XBox Softmodding Tool v1.1.4 [ep. 79]How To RGB Mod a Toshiba 27AF45 & Misc. Info [ep. 108]Original OG XBox Stuck DVD Drive Fix- Savers Rescue pt.3 [ep. 69]
The SegaHolic |

Episode 129: Sony PVM-14n5u to PVM-14n6u RGB Mod and Restore | HDR HLG |

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER