Uploaded November 2025 | Updated November 2026, 1 day ago
This presentation addresses Traffic Engineering (TE) mechanisms that support power-savings. Networks are designed with sufficient capacity to support heavy traffic during peak hours. During non-peak hours, unused capacity continues to consume (i.e., waste) power.
The TE mechanism described in this talk relies upon Power Groups (PG). A Power Group is a hierarchical abstraction of power consumed by hardware components. Interfaces can reference the PG to which they belong. Therefore, Power Groups provide a method of organizing interfaces into groups by power characteristics.
Having organized interfaces into power groups, the TE path placement algorithm can optimize power savings. During peak hours, the path placement algorithm can distribute traffic across all PGs. During off-peak hours, it starves selected PGs of traffic, allowing them to be powered down until they are needed again.
This presentation focuses on proposed IS-IS mechanisms that distribute power group information.
Colby Barth: Colby Barth is a Distinguished Engineer at Juniper Networks for the past 15 years, working in the JunOS Routing Protocols group with an emphasis on Traffic Engineering applications. Colby has authored several RFCs, Internet drafts, books and over 30 patents to date. He has over 25 years of experience designing, building, and operating IP/MPLS networks.
This presentation addresses Traffic Engineering (TE) mechanisms that support power-savings. Networks are designed with sufficient capacity to support heavy traffic during peak hours. During non-peak hours, unused capacity continues to consume (i.e., waste) power.
The TE mechanism described in this talk relies upon Power Groups (PG). A Power Group is a hierarchical abstraction of power consumed by hardware components. Interfaces can reference the PG to which they belong. Therefore, Power Groups provide a method of organizing interfaces into groups by power characteristics.
Having organized interfaces into power groups, the TE path placement algorithm can optimize power savings. During peak hours, the path placement algorithm can distribute traffic across all PGs. During off-peak hours, it starves selected PGs of traffic, allowing them to be powered down until they are needed again.
This presentation focuses on proposed IS-IS mechanisms that distribute power group information.
Colby Barth: Colby Barth is a Distinguished Engineer at Juniper Networks for the past 15 years, working in the JunOS Routing Protocols group with an emphasis on Traffic Engineering applications. Colby has authored several RFCs, Internet drafts, books and over 30 patents to date. He has over 25 years of experience designing, building, and operating IP/MPLS networks.










