VogMan | Enclosure heater WINTER update - for 3D resin printing @vogman | Uploaded December 2022 | Updated October 2024, 6 minutes ago.
Better 3D Resin prints is only possible if your resin temperature is ideal, and my enclosure heater has been helping me and many others achieve this easily. But when temperatures drop well below normal, it's time to step up the heat.
🔹 _*VOGs HEATER BODY STL FILES*_ 🔹
▶ etsy.me/3DDEE5K
🔹 _*ELEGOO THERMOCHROMIC RESIN*_ 🔹
▶ bit.ly/3zmqBPm
🔹 _*WHAM BAM HOTBOX*_ 🔹
▶ bit.ly/3DgxH9d and use the discount code VOG2022 (this code is valid until mid 2023)
🔹 _*PARTS LIST*_ 🔹
UK - amzn.to/3GoqRkN - GU10 50W Halogen Bulb (not LED)
US - amzn.to/3I8rwYT - GU10 50W Halogen Bulb (not LED)
CA - amzn.to/3WR0JVg - GU10 50W Halogen Bulb (not LED)
💚💚💚 *PLEASE SUPPORT THIS CHANNEL* 💚💚💚
The price of a cup of coffee can really help me grow my channel. If you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢 patreon.com/vegoilguy 😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 vegoilguy.co.uk/donations 😁
🔹 _*MY LINKS*_ 🔹
▶ vogman.co.uk
▶ facebook.com/thevogman
▶ instagram.com/the_vogman
▶ rumble.com/c/c-2100620
▶ vogsmerch.myspreadshop.co.uk
▶ etsy.com/uk/shop/VegOilGuy
▶ patreon.com/vegoilguy
🔹 _*DISCLAIMER*_ 🔹
Please remember, I’m no electrician. I’m just a keen amateur. I have tested my enclosure heater as thoroughly as I can, and have not detected any issues that would give me cause for concern. But I could be wrong, I’m only human.
I’ve tried to make the electrical side of things as easy as possible, but ultimately you are responsible. I can’t be there with you; I can’t ensure you fit everything properly and I can’t be fully sure you use the heater safely. For this reason, I urge you to be careful.
If you’re not fully confident in handling electrics, don’t do it! It’s not worth the risk. Contact a qualified electrician.
This project makes use of mains voltage components which have the potential to harm or even kill you. Caution is strongly advised.
When dealing with electricity, always isolate and disconnect the power source. Make use of an RCD (earth leakage device) and ensure your supply is up to code. Fit a smoke alarm nearby as a precaution. Use quality products, insulate any bare connections and protect the unsuspecting from potential harm. Never leave the heater running unattended. Be vigilant in use.
All the responsibility for this project has to lie with you. If in doubt, if it all unsure, don’t do it. You’re much too valuable.
Play safe!!!
#resinprinting
#3dprinting
#vegoilguy
#vogman
#vog
Better 3D Resin prints is only possible if your resin temperature is ideal, and my enclosure heater has been helping me and many others achieve this easily. But when temperatures drop well below normal, it's time to step up the heat.
🔹 _*VOGs HEATER BODY STL FILES*_ 🔹
▶ etsy.me/3DDEE5K
🔹 _*ELEGOO THERMOCHROMIC RESIN*_ 🔹
▶ bit.ly/3zmqBPm
🔹 _*WHAM BAM HOTBOX*_ 🔹
▶ bit.ly/3DgxH9d and use the discount code VOG2022 (this code is valid until mid 2023)
🔹 _*PARTS LIST*_ 🔹
UK - amzn.to/3GoqRkN - GU10 50W Halogen Bulb (not LED)
US - amzn.to/3I8rwYT - GU10 50W Halogen Bulb (not LED)
CA - amzn.to/3WR0JVg - GU10 50W Halogen Bulb (not LED)
💚💚💚 *PLEASE SUPPORT THIS CHANNEL* 💚💚💚
The price of a cup of coffee can really help me grow my channel. If you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢 patreon.com/vegoilguy 😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 vegoilguy.co.uk/donations 😁
🔹 _*MY LINKS*_ 🔹
▶ vogman.co.uk
▶ facebook.com/thevogman
▶ instagram.com/the_vogman
▶ rumble.com/c/c-2100620
▶ vogsmerch.myspreadshop.co.uk
▶ etsy.com/uk/shop/VegOilGuy
▶ patreon.com/vegoilguy
🔹 _*DISCLAIMER*_ 🔹
Please remember, I’m no electrician. I’m just a keen amateur. I have tested my enclosure heater as thoroughly as I can, and have not detected any issues that would give me cause for concern. But I could be wrong, I’m only human.
I’ve tried to make the electrical side of things as easy as possible, but ultimately you are responsible. I can’t be there with you; I can’t ensure you fit everything properly and I can’t be fully sure you use the heater safely. For this reason, I urge you to be careful.
If you’re not fully confident in handling electrics, don’t do it! It’s not worth the risk. Contact a qualified electrician.
This project makes use of mains voltage components which have the potential to harm or even kill you. Caution is strongly advised.
When dealing with electricity, always isolate and disconnect the power source. Make use of an RCD (earth leakage device) and ensure your supply is up to code. Fit a smoke alarm nearby as a precaution. Use quality products, insulate any bare connections and protect the unsuspecting from potential harm. Never leave the heater running unattended. Be vigilant in use.
All the responsibility for this project has to lie with you. If in doubt, if it all unsure, don’t do it. You’re much too valuable.
Play safe!!!
#resinprinting
#3dprinting
#vegoilguy
#vogman
#vog
