Uploaded July 2022 | Updated November 2026, 3 hours ago
Patch and patch notes can be found at: patchstorage.com/loopamajig-quad-probabilistic-modulated-loopers
Patch and patch notes can be found at: patchstorage.com/loopamajig-quad-probabilistic-modulated-loopers




![Empress Effects ZOIA Euroburo tutorial: CV input options clock filters and transpose 0V
Or how to get consistent results from gates and triggers, and how to get your sequences to play in tune.
Jason Fees (technical) explanation of clock filters:
With nothing plugged in the input isnt floating but its only connected to ground through a really large resistor. The purpose of the large resistor is to bias the input circuitry close to ground when nothing is plugged in to keep it from bouncing around wildly.
The downside of using a large resistor is that any leakage current or current noise of the input opamp of that circuit becomes a measurable voltage ( 20-40mV). So when you plug in a device with a low output impedance [like a eurorack module] that noise is essentially disappearing. We cant bias with a small resistor because then when something is plugged in it would create a resistor divider so the Zebu would see the incoming signals as attenuated somewhat (so 5V from a sending device might look like 4.8V to Zebu).
So, the 20-40mV of un-patched noise is sort of a necessary evil. In digital, high precision is almost free, in analog its a bit of a pain and kind of expensive. The fact that we have 1-3mV of precision over the CV range was no small feat. Empress Effects ZOIA Euroburo tutorial: CV input options clock filters and transpose 0V](https://i.ytimg.com/vi/S9DyRUvm0L8/mqdefault.jpg)





