Uploaded June 2020 | Updated November 2026, 3 hours ago
Powered by Restream restream.io
Today we're learning about Emmette Chappelle, a scientist who helped discover how some animals produce light without heat.
He also discovered how algae turns CO2 into Oxygen, a critical piece to the puzzle for NASA sending astronauts on long term missions.
youtu.be/8ulH0dm66Ag
Join us on Patreon to get the activity pdf
patreon.com/RosieResearch
Paper Circuit Week
This whole week is creative circuit based so you'll need the same circuit supplies, which I'll post below. If you're on the island and run out of anything, let me know and we'll try to drop something off for you.
Supplies for today's Paper Circuit:
Printouts
LEDs
CR2032 battery
Copper tape
Creative mindset
Paper circuit supplies on Amazon- amzn.to/2KI1tIW
Instructions for Paper Circuits
1. Place copper tape along the two yellow lines in the template. Each line should have one piece of tape bent around corners.
2. Tape your battery on top of the green circle so you can see the letters. Make sure to keep part of the battery metal exposed!
3. Use scotch or masking tape to tape the long leg of the LED to the copper tape with the red outline, and the short leg of the LED to the tape outlined in black.
4. Cut out the drawing and portrait and stand them up on the paper. (we use a 1/2 inch strip of paper cut from the edge to prop up the drawings)
Troubleshooting Tips
If you LED doesn't light up check:
That your battery is good
That your LED is good
That your LED is in the right direction
That your copper tape lines have no rips
Powered by Restream restream.io
Today we're learning about Emmette Chappelle, a scientist who helped discover how some animals produce light without heat.
He also discovered how algae turns CO2 into Oxygen, a critical piece to the puzzle for NASA sending astronauts on long term missions.
youtu.be/8ulH0dm66Ag
Join us on Patreon to get the activity pdf
patreon.com/RosieResearch
Paper Circuit Week
This whole week is creative circuit based so you'll need the same circuit supplies, which I'll post below. If you're on the island and run out of anything, let me know and we'll try to drop something off for you.
Supplies for today's Paper Circuit:
Printouts
LEDs
CR2032 battery
Copper tape
Creative mindset
Paper circuit supplies on Amazon- amzn.to/2KI1tIW
Instructions for Paper Circuits
1. Place copper tape along the two yellow lines in the template. Each line should have one piece of tape bent around corners.
2. Tape your battery on top of the green circle so you can see the letters. Make sure to keep part of the battery metal exposed!
3. Use scotch or masking tape to tape the long leg of the LED to the copper tape with the red outline, and the short leg of the LED to the tape outlined in black.
4. Cut out the drawing and portrait and stand them up on the paper. (we use a 1/2 inch strip of paper cut from the edge to prop up the drawings)
Troubleshooting Tips
If you LED doesn't light up check:
That your battery is good
That your LED is good
That your LED is in the right direction
That your copper tape lines have no rips










