Uploaded April 2012 | Updated November 2026, 2 hours ago
When we ran with antenna feedback and cranked the power up some, we discovered in an amusing turn of events that none of the electronic parts were getting warm -- but that the topload was getting *quite* warm! We removed the topload and cranked it up some.
"Bolts" refer to power settings on the variac -- the variac has a handful of bolts on the top holding it together, so "one bolt" is a baseline power setting around 20%.
We measured later with the Kill-A-Watt; the variac idles at 21W. At one bolt with the topload, we draw 44.5W; without the topload, 36W. At 1500 millibolts, 60W with the topload, and 46W without the topload. Notably, also, without the topload, we get quite a lot more substantial sparks. We intend to modify the topload next so that it behaves less like a shorted turn.
April 28, 2012.
When we ran with antenna feedback and cranked the power up some, we discovered in an amusing turn of events that none of the electronic parts were getting warm -- but that the topload was getting *quite* warm! We removed the topload and cranked it up some.
"Bolts" refer to power settings on the variac -- the variac has a handful of bolts on the top holding it together, so "one bolt" is a baseline power setting around 20%.
We measured later with the Kill-A-Watt; the variac idles at 21W. At one bolt with the topload, we draw 44.5W; without the topload, 36W. At 1500 millibolts, 60W with the topload, and 46W without the topload. Notably, also, without the topload, we get quite a lot more substantial sparks. We intend to modify the topload next so that it behaves less like a shorted turn.
April 28, 2012.










