The Feral Engineer | Elegoo Neptune 4 Plus and Max homing issue quick fix (PLEASE READ DESCRIPTION AND WATCH PART 2!) @TheFeralEngineer | Uploaded 11 months ago | Updated 3 hours ago
If you've been having some crashing when trying to home your new printer, this might be the issue. Give it a try. I made this video in haste before leaving on a business trip for the week, so here are a few notes to go with the video:

Please keep in mind that these are only suggested numbers and your machine and situation may be different. *THIS IS NOT A CATCH-ALL, IT IS MERELY A SUGGESTED STARTING POINT*. As mentioned in the video, you may have to make minor adjustments. You can find information on those adjustments here:

klipper3d.org/TMC_Drivers.html

I've been hearing 20mm/sec homing speed is the golden number, but YMMV.

Also, make sure your motor belts are tensioned properly. They don't have to be guitar string tight, but they can't be too loose either, or the driver will not sense the proper signal.

Please watch part 2 for more information!

Drop me some catnip 🐱
paypal.me/timpsonmusicllc