Uploaded March 2021 | Updated September 2026, 1 week ago
#111 In this video I look at quite a common component of modern high performance heat dissipation technology - the heat pipe. I look at the reasoning and functionality behind it and then turn to some experiments to highlight how it works and what are its limitations.
More on the constant voltage load:
youtu.be/6A1x64uAgag
Further reading:
wakefield-vette.com/Portals/0/heat%20pipes/Wakefield%20Vette%20Heat%20Pipe%20Selection%20and%20Design%20Guide%20Rev2.pdf
1-act.com/water-heat-pipe-parameters-and-limitations
Special Thanks to all my supporters on Patreon! Especially @afiskon and Ralf B.!
If you liked this video be sure to check out my other videos and you can also subscribe to be up to date with all the new ones!
If you want to support the creation of more and better videos please consider checking out: patreon.com/feszelectronics
#111 In this video I look at quite a common component of modern high performance heat dissipation technology - the heat pipe. I look at the reasoning and functionality behind it and then turn to some experiments to highlight how it works and what are its limitations.
More on the constant voltage load:
youtu.be/6A1x64uAgag
Further reading:
wakefield-vette.com/Portals/0/heat%20pipes/Wakefield%20Vette%20Heat%20Pipe%20Selection%20and%20Design%20Guide%20Rev2.pdf
1-act.com/water-heat-pipe-parameters-and-limitations
Special Thanks to all my supporters on Patreon! Especially @afiskon and Ralf B.!
If you liked this video be sure to check out my other videos and you can also subscribe to be up to date with all the new ones!
If you want to support the creation of more and better videos please consider checking out: patreon.com/feszelectronics
![EMC tutorials - [1/3] Building an LISN](https://i.ytimg.com/vi/OEvkRW5vZNA/mqdefault.jpg "EMC tutorials - [1/3] Building an LISN
#114 In this video I look at the specifications and parameters behind a line impedance stabilization network, or LISN. I look at what is the purpose of the various components is and then take a closer look at how the values need to be chosen. Finally I build such a device.
More on the topic:
Part 1: https://youtu.be/OEvkRW5vZNA
Part 2: https://youtu.be/nq-IhHbZdD0
Part 3: https://youtu.be/M_ab0Oz2ypI
Datasheet:
https://ro.mouser.com/datasheet/2/445/7447707100-1901245.pdf
LISN schematic:
https://drive.google.com/file/d/16oYTyPU5FxeHJ_kNeXga7rXHTa_4HE9U/view?usp=sharing
Coil structure:
https://www.thingiverse.com/thing:4806829
Further reading:
https://www.tekbox.com/product/Pre-Compliance_Conducted_Emission_Measurements.pdf
https://www.ti.com/lit/wp/slyy136/slyy136.pdf
Special Thanks to all my supporters on Patreon! Especially @afiskon and Ralf B.!
If you liked this video be sure to check out my other videos and you can also subscribe to be up to date with all the new ones!
If you want to support the creation of more and better videos please consider checking out: https://www.patreon.com/feszelectronics")
