Uploaded June 2026 | Updated November 2026, 26 minutes ago
Great for off-grid solar setups, it's a file server for your media, a router and access point to create your own private internal network and protect your devices from the public internet.
NOTE: If you're going to use a USB tethered phone for internet source on the router, you'll need to add your own routing to the iptables. The commands are listed below, change wlan1 to the device your AP is using.
sudo iptables -t nat -A POSTROUTING -o usb0 -j MASQUERADE
sudo iptables -A FORWARD -i wlan1 -o usb0 -j ACCEPT
sudo iptables -A FORWARD -i usb0 -o wlan1 -m state --state RELATED,ESTABLISHED -j ACCEPT
sudo netfilter-persistent save
Links:
SSD: amazon.com/dp/B07B4G19X3
USB sata: amazon.com/dp/B0716JKJ68
USB hub: amazon.com/dp/B00TPMEOYM?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4
Pi zero: amazon.com/dp/B0FN4CN7TM
5V PS: amazon.com/dp/B0CRVXCLY6
RFI Filter: amazon.com/dp/B0F59DYGD8
Software
Raspap: raspap.com/quick-start
SAMBA: linuxvox.com/blog/samba-share-linux
3D STL files for my build, designed for that specific usb hub:
thingiverse.com/thing:7375833
If you like my videos, please subscribe here:
youtube.com/user/loughkb?sub_confirmation=1
If you want me to keep making more videos like this, consider becoming my patron at Patreon: patreon.com/kb9rlw
Discuss this and other videos on Facebook:
facebook.com/kb9rlw
If you want to give me a tip, patreon donate page is here:
paypal.com/donate/?hosted_button_id=TJDA65P3JDVHJ
Great for off-grid solar setups, it's a file server for your media, a router and access point to create your own private internal network and protect your devices from the public internet.
NOTE: If you're going to use a USB tethered phone for internet source on the router, you'll need to add your own routing to the iptables. The commands are listed below, change wlan1 to the device your AP is using.
sudo iptables -t nat -A POSTROUTING -o usb0 -j MASQUERADE
sudo iptables -A FORWARD -i wlan1 -o usb0 -j ACCEPT
sudo iptables -A FORWARD -i usb0 -o wlan1 -m state --state RELATED,ESTABLISHED -j ACCEPT
sudo netfilter-persistent save
Links:
SSD: amazon.com/dp/B07B4G19X3
USB sata: amazon.com/dp/B0716JKJ68
USB hub: amazon.com/dp/B00TPMEOYM?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4
Pi zero: amazon.com/dp/B0FN4CN7TM
5V PS: amazon.com/dp/B0CRVXCLY6
RFI Filter: amazon.com/dp/B0F59DYGD8
Software
Raspap: raspap.com/quick-start
SAMBA: linuxvox.com/blog/samba-share-linux
3D STL files for my build, designed for that specific usb hub:
thingiverse.com/thing:7375833
If you like my videos, please subscribe here:
youtube.com/user/loughkb?sub_confirmation=1
If you want me to keep making more videos like this, consider becoming my patron at Patreon: patreon.com/kb9rlw
Discuss this and other videos on Facebook:
facebook.com/kb9rlw
If you want to give me a tip, patreon donate page is here:
paypal.com/donate/?hosted_button_id=TJDA65P3JDVHJ










