Electric Injection Molding Machines - Optimizing Control+ Settings @PaulsonTraining
Electric Injection Molding Machines - Optimizing Control+ Settings  @PaulsonTraining
Uploaded July 2013 | Updated November 2026, 12 hours ago
This video is an excerpt from Lesson #3 of Paulson Training Program's "Understanding Electric Injection Molding Machines" series. This lesson is titled "Lesson 3 -- Optimizing Electric Injection Molding Machine Settings".

You can sign-up for more sample from Paulson's injection molding training at: plasticstrainingcenter.com/injection-molding-training-yt

Complete details on the all-electric molding machine training program can be on our website here: paulsontraining.com/products/electric-injection-molding-course

All-Electric injection molding machines make up the majority of new molding machine sales today. There are some important reasons for their popularity. Some of the biggest reasons are having more precise control over the injection molding cycle, less electricity consumption and often, faster cycles times. However, these machines require an understanding of the all-electric molding machine technology by your team to take full advatage of what all-electrics have to offer.

This training course accomplishes that goal. Below is a brief outline of the 3 lessons in this all-electric injection molding machine training program:

Lesson 1 -- Electric Machine Design, Cycle & Parts
=====================================
The parts of the Electric molding machine
How Electric molding machines work
Comparing the operation of the Electric and the Hydraulic molding machine
Operation of the ball screw drive
The molding cycle
Instruments and controls used on these machines
Typical operating conditions

Lesson 2 -- The Effects of Each Control
============================
Safety around these machines
Machine modes of operation: manual, semi-automatic and automatic
Explanation and effects of the injection controls: injection rates and pressures, vpt settings, back pressure, shot size, cushion, control change ramps, decompression and others.

Lesson 3 -- Optimizing Electric Machine Settings
===================================
Clamp settings: control of clamp distance and speed, clamp force, safety concerns.
Ejector control
Optimizing the machine control settings
Process recordings
Procedures for utilizing the advantages of the Electric machine.
Electric Injection Molding Machines - Optimizing Control+ SettingsThe Technology of Injection Molding - TrailerThick Sheet Thermoforming - Lesson 5 Molds –Venting, Mold Cooling and Finished Part PropertiesInjection Molding - Optimizing The Injection Molding CycleSpanish - Operating a Plastics Extruder- Optimizing Extruder ControlsJetting in Injection Molding - How Jetting OccursInjection Molding From The Plastics Point of ViewSingle Screw Extruder Operation & Control - Paulson TrainingPractical Injection Molding Machine Basic Operation
PaulsonTraining |

Electric Injection Molding Machines - Optimizing Control+ Settings

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER