Uploaded June 2025 | Updated November 2026, 15 hours ago
homebuildingandrepairs.com - Here's another collection of stair videos.
Video 1: Spiral Staircase Egress Code
This video explains a crucial but often overlooked building code regarding spiral staircases. Learn why a spiral staircase cannot always be the sole means of egress, especially for areas exceeding 250 square feet (23 square meters) or serving more than five occupants. We'll differentiate spiral stairs from curved or winding stairs for egress purposes and emphasize the importance of checking your local building codes, providing a specific code reference as an example.
Video 2: Straight Stairway Design & Building Codes (Part 1 of 2-Part Video on Straight Stairs)
This video (Part 1) delves into essential design considerations for straight stairways in a two-story house, focusing on building code compliance. Discover how to determine if your planned stairway will fit by understanding and applying local codes for maximum riser height and minimum tread depth. We'll also explore challenges like wall locations, floor heights, minimum clearances in front of stairs, and the critical, often-missed, headroom height requirement to prevent injuries. Learn why compromising safety codes for space is a bad idea and how stair design can impact room layouts.
Video 3: Building Plan Inaccuracies for Stairs (Part 2 of 2-Part Video on Straight Stairs)
This video (Part 2) highlights a common issue in construction: inaccurate measurements on building plans, especially for stairways. Learn how designers might round numbers or make slight miscalculations (e.g., for riser height) to fit designs, potentially leading to non-compliant or problematic stairs during construction. We'll walk through an example calculation to show how these discrepancies occur and why it's vital to verify all measurements meticulously during the design phase, not when you're building.
Video Script 4: The Folding Carpenter's Rule
This video explores the folding carpenter's rule, a classic measuring tool that predates the modern tape measure. Discover its history, tracing origins back to ancient civilizations and its rise during the Industrial Revolution. Learn why this simple, reliable, and versatile tool is still cherished by some carpenters, masons, and engineers, often passed down through generations. We'll demonstrate how to use a folding ruler, compare its markings, and discuss why some craftspeople prefer it even in the age of lasers and digital levels.
Keywords: folding ruler, carpenter's rule, measuring tools, vintage tools, woodworking tools, masonry tools, construction history, tape measure comparison, traditional tools, Lufkin rule, antique tools
Video 5: Making Plywood Stair Stringer Templates/Laminated Stringers
This video demonstrates a method for creating robust stair stringers using plywood, potentially by first making a template from a standard cut stringer. Learn how to lay out, mark, and cut plywood (e.g., 1 1/8" thick) to assemble strong, laminated stringers. We'll cover the importance of liberal glue application, proper clamping, and the option of using nails, screws, or bolts. This technique can create stringers for landings that might not require traditional under-support, but always consider consulting a structural engineer for material specifications and approval.
Video 6: Building Outdoor Stairs with Tires
This video offers a practical tip for building an inexpensive straight set of stairs on a slope using used tires. Learn a method to achieve relatively consistent steps by carefully setting and leveling the first and last tire, then using a tight string line between stakes as a guide for placing intermediate tires. We'll cover positioning, dirt removal/filling, and leveling each tire. While this provides a budget-friendly solution for access on your property, be aware that tire stairs are unlikely to meet local building codes.
Video 7: Installing Skirt Board on Existing/Uneven Stairs (Piece by Piece)
This video presents a method for installing skirt boards on existing stairways, especially those with inconsistent riser heights or tread depths. Learn how to cut and fit individual horizontal and vertical trim pieces one by one, using a measuring board for accuracy. We'll discuss starting points, marking techniques, and whether to fill any resulting gaps.
Video Script 8: Handrail Design for Two-Step Winder Stairs
Educational Description: This video tackles the complexities of designing a code-compliant handrail for a two-step winder staircase. We explore how standard handrail height rules (typically 34-38 inches) apply and the argument for measuring along the slope of the nosings. Learn how winder steps necessitate adjustments, often requiring the handrail to drop at specific points to maintain consistent height.
homebuildingandrepairs.com - Here's another collection of stair videos.
Video 1: Spiral Staircase Egress Code
This video explains a crucial but often overlooked building code regarding spiral staircases. Learn why a spiral staircase cannot always be the sole means of egress, especially for areas exceeding 250 square feet (23 square meters) or serving more than five occupants. We'll differentiate spiral stairs from curved or winding stairs for egress purposes and emphasize the importance of checking your local building codes, providing a specific code reference as an example.
Video 2: Straight Stairway Design & Building Codes (Part 1 of 2-Part Video on Straight Stairs)
This video (Part 1) delves into essential design considerations for straight stairways in a two-story house, focusing on building code compliance. Discover how to determine if your planned stairway will fit by understanding and applying local codes for maximum riser height and minimum tread depth. We'll also explore challenges like wall locations, floor heights, minimum clearances in front of stairs, and the critical, often-missed, headroom height requirement to prevent injuries. Learn why compromising safety codes for space is a bad idea and how stair design can impact room layouts.
Video 3: Building Plan Inaccuracies for Stairs (Part 2 of 2-Part Video on Straight Stairs)
This video (Part 2) highlights a common issue in construction: inaccurate measurements on building plans, especially for stairways. Learn how designers might round numbers or make slight miscalculations (e.g., for riser height) to fit designs, potentially leading to non-compliant or problematic stairs during construction. We'll walk through an example calculation to show how these discrepancies occur and why it's vital to verify all measurements meticulously during the design phase, not when you're building.
Video Script 4: The Folding Carpenter's Rule
This video explores the folding carpenter's rule, a classic measuring tool that predates the modern tape measure. Discover its history, tracing origins back to ancient civilizations and its rise during the Industrial Revolution. Learn why this simple, reliable, and versatile tool is still cherished by some carpenters, masons, and engineers, often passed down through generations. We'll demonstrate how to use a folding ruler, compare its markings, and discuss why some craftspeople prefer it even in the age of lasers and digital levels.
Keywords: folding ruler, carpenter's rule, measuring tools, vintage tools, woodworking tools, masonry tools, construction history, tape measure comparison, traditional tools, Lufkin rule, antique tools
Video 5: Making Plywood Stair Stringer Templates/Laminated Stringers
This video demonstrates a method for creating robust stair stringers using plywood, potentially by first making a template from a standard cut stringer. Learn how to lay out, mark, and cut plywood (e.g., 1 1/8" thick) to assemble strong, laminated stringers. We'll cover the importance of liberal glue application, proper clamping, and the option of using nails, screws, or bolts. This technique can create stringers for landings that might not require traditional under-support, but always consider consulting a structural engineer for material specifications and approval.
Video 6: Building Outdoor Stairs with Tires
This video offers a practical tip for building an inexpensive straight set of stairs on a slope using used tires. Learn a method to achieve relatively consistent steps by carefully setting and leveling the first and last tire, then using a tight string line between stakes as a guide for placing intermediate tires. We'll cover positioning, dirt removal/filling, and leveling each tire. While this provides a budget-friendly solution for access on your property, be aware that tire stairs are unlikely to meet local building codes.
Video 7: Installing Skirt Board on Existing/Uneven Stairs (Piece by Piece)
This video presents a method for installing skirt boards on existing stairways, especially those with inconsistent riser heights or tread depths. Learn how to cut and fit individual horizontal and vertical trim pieces one by one, using a measuring board for accuracy. We'll discuss starting points, marking techniques, and whether to fill any resulting gaps.
Video Script 8: Handrail Design for Two-Step Winder Stairs
Educational Description: This video tackles the complexities of designing a code-compliant handrail for a two-step winder staircase. We explore how standard handrail height rules (typically 34-38 inches) apply and the argument for measuring along the slope of the nosings. Learn how winder steps necessitate adjustments, often requiring the handrail to drop at specific points to maintain consistent height.










