Econostitch® Peel Ply @fibreglast
Econostitch® Peel Ply  @fibreglast
Uploaded April 2015 | Updated November 2026, 3 hours ago
Visible Before and After Cure

Econostitch® Peel Ply creates a uniform, textured surface finish for your laminate that reduces or eliminates the need for sanding or scuffing your part once the bagging process is complete. It features a fine weave but when laid directly next to your laminate in lay-up, it allows excess resin and air to flow through, eliminating voids in your parts. Econostitch features red tracers which allow it to be visible before and after a cure, reducing the possibility of the peel ply being left on the part.

Scoured, heat set, and coated with a release agent for easy release from your finished part
Can be used with temperatures up to 375°F
Compatible with all of the resins on our website.
60" wide
0.006" thick
Econostitch® Peel PlyChopped Strand Mat2733 - Modified Kevlar ScissorsFE 32 Fabrication - Part OneSystem 2001 Epoxy Laminating Resin4202 & 4203 - Non-Skid Rubber Additive4/ Electric Z Project - Firewall for the Frunk1543 9 oz Style 6781 S2-Glass Fiberglass Fabric1/ Carbon Fiber Cowling Fabrication1/ Electric Supercar WATTSON SEMASurfa Solve Hand Wipes3K Stabilized Carbon Fiber Fabric – Part Two
Fibre Glast |

Econostitch® Peel Ply

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER