As Wood Turns | Eccentric Woodturning Off Axis Medallions @AsWoodTurns | Uploaded 2 years ago | Updated 2 hours ago
https://www.AsWoodTurns.com
This is part of a series on eccentric turning.
In this project video, I turn a medallion or pendant and insert different wood for visual interest.
The main wood is sycamore with a walnut backing. The inserts are walnut, cherry, and padauk.
The main disk controls how far the new axis is from the lathe spindle.
The inner disk controls an offset from the new axis for yet another axis.
The main accessory is a shop-made chuck based on "Build A Shopmade Chuck For Offset Turnings" by David Mueller. American Woodturner February 2015. I have adapted this chuck to have exchangeable work platforms that interchange with the Infinite Axis Chuck that I designed.
The eccentric chuck article is available to read or download from
- kawarthawoodturners.ca/wp-content/uploads/2018/10/Shopmade-Jig-AW3001p35-40.pdf
courtesy of Kawartha Woodturners.
Turning sent much easier with a couple more accessories:
- 2 screw chucks (3/8") for direct mount of the work platform to the lathe spindle.
- Flat faced faceplate sized for target diameter also used to press double sided tape bonding.
- Live center with #2 Morse taper and 1 1/4 x 8 tpi.
- Spindle adapter 1"x8 tpi female to 1.25"x8tpi male top adapt the live center from 1" to 1.25"
Enjoy!
Blog: https://www.AsWoodTurns.com
FB: https://www.Facebook.com/AsWoodTurns
InstaGram: http://www.Instgram.com/as_wood_turns
Etsy: etsy.com/shop/AsWoodTurnsTools
Pinterest pinterest.com/aswoodturns
#eccentric #offaxis #pendant #medallion #jewelry #multiaxis #woodworking #woodturning #woodturningprojects #lathe #AlanStratton #video #DIY
https://www.AsWoodTurns.com
This is part of a series on eccentric turning.
In this project video, I turn a medallion or pendant and insert different wood for visual interest.
The main wood is sycamore with a walnut backing. The inserts are walnut, cherry, and padauk.
The main disk controls how far the new axis is from the lathe spindle.
The inner disk controls an offset from the new axis for yet another axis.
The main accessory is a shop-made chuck based on "Build A Shopmade Chuck For Offset Turnings" by David Mueller. American Woodturner February 2015. I have adapted this chuck to have exchangeable work platforms that interchange with the Infinite Axis Chuck that I designed.
The eccentric chuck article is available to read or download from
- kawarthawoodturners.ca/wp-content/uploads/2018/10/Shopmade-Jig-AW3001p35-40.pdf
courtesy of Kawartha Woodturners.
Turning sent much easier with a couple more accessories:
- 2 screw chucks (3/8") for direct mount of the work platform to the lathe spindle.
- Flat faced faceplate sized for target diameter also used to press double sided tape bonding.
- Live center with #2 Morse taper and 1 1/4 x 8 tpi.
- Spindle adapter 1"x8 tpi female to 1.25"x8tpi male top adapt the live center from 1" to 1.25"
Enjoy!
Blog: https://www.AsWoodTurns.com
FB: https://www.Facebook.com/AsWoodTurns
InstaGram: http://www.Instgram.com/as_wood_turns
Etsy: etsy.com/shop/AsWoodTurnsTools
Pinterest pinterest.com/aswoodturns
#eccentric #offaxis #pendant #medallion #jewelry #multiaxis #woodworking #woodturning #woodturningprojects #lathe #AlanStratton #video #DIY
