Uploaded March 2020 | Updated November 2026, 1 hour ago
In this episode, we will be upgrading the Intensity control (a potentiometer) with higher grade carbon film unit which ordered form Amazon (see more here: amzn.to/2Tw0XTN ). Also as covered in a prior video, failure of this existing low quality potentiometer is the number one reason I have bumped into from view as to why their k40 lasers fail.
Update:
As mentioned in the video, I initially used the large lock washer as a spacer because the potentiometer has a small protrusion to lock into place which is not used. So you could snip off, or spacer it out. Since I have a bunch of 3D printers. I printed a custom spacer as well I decided I did not like part of the original graphics showing the face with the new scale so I designed new cover also as you saw both as insets in the video. I have placed both of these on Thingiverse and My Mini Factory (see links below) in case you guy also want to try them out!
Thingiverse: thingiverse.com/thing:4209286
MyMiniFactory:
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: diy3dtech.com/blog
Please visit DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
instagram.com/diy3dtech
-Follow us on Tumblr:
tumblr.com/blog/diy3dtech
-Follow us on Reddit:
reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech
In this episode, we will be upgrading the Intensity control (a potentiometer) with higher grade carbon film unit which ordered form Amazon (see more here: amzn.to/2Tw0XTN ). Also as covered in a prior video, failure of this existing low quality potentiometer is the number one reason I have bumped into from view as to why their k40 lasers fail.
Update:
As mentioned in the video, I initially used the large lock washer as a spacer because the potentiometer has a small protrusion to lock into place which is not used. So you could snip off, or spacer it out. Since I have a bunch of 3D printers. I printed a custom spacer as well I decided I did not like part of the original graphics showing the face with the new scale so I designed new cover also as you saw both as insets in the video. I have placed both of these on Thingiverse and My Mini Factory (see links below) in case you guy also want to try them out!
Thingiverse: thingiverse.com/thing:4209286
MyMiniFactory:
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: diy3dtech.com/blog
Please visit DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
instagram.com/diy3dtech
-Follow us on Tumblr:
tumblr.com/blog/diy3dtech
-Follow us on Reddit:
reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech
![Shop Talk - Affordable Industrial USB Camera!
In this episode, we will be looking at the SVPRO USB Web Camera with a 5-50mm Manual Zoom Varifocal and supports varous frame rates (see more on the camera here: http://diy3dtech.com/SVPRO_USB_Web_Camera ) as this USB based industrial camera is packs an amazing amount of performance for a very affordable price point.
SVPRO USB Web Camera Features:
2.0Megapixel 1080P Resolution
Sensor 1/2.7 CMOS OV2710
1920(H)x1080(V)pixels/Max. Resolution 1920X1080
Picture format MJPEG or YUY2 optional/USB Protocal USB2.0 HS/FS
Auto exposure AEC Support/Auto white blance AEB Support
Effective Pixels:
1920 (H) x 1080 (V) pixels/1280 (H) x 1024 (V) pixels/1280 (H) x 720 (V) pixels/1024 (H) x 768 (V) pixels/800 (H) x 600 (V) pixels/640 (H) x 480 (V) pixels/352(H) x 288 (V) pixels/320 (H) x 240 (V) pixels
Performance: 1920 (H) x 1080 (V) pixels MJPEG 30fps YUY2 6fps 1280 (H) x 1024 (V) pixels MJPEG 30fps YUY2 6fps 1280 (H) x 720 (V) pixels MJPEG 60fps YUY2 9fps 1024 (H) x 768 (V) pixels MJPEG 30fps YUY2 9fps 800 (H) x 600 (V) pixels MJPEG 60fps YUY2 21fps 640 (H) x 480 (V) pixels MJPEG 120fps YUY2 30fps
Adjustable parameters Brightness/Contrast/Color saturation /Definition/Gamma/WB
Night vision optional, Support IR Cut and IR board for night vision
Voltage DC 5V/current 150mA/work temperature
DEGREES(-20~70)/Size 32x32mm/38*38
Support OS WinXP/Vista/WIN7/WIN8/Linux with UVC/Mac-OS X 10.4.8 or later/Wince with UVC/Android 4.0 or above
Looking for the best deals on 3D Printers or maybe just want to see what new, this link is for you: http://diy3dtech.com/Current_GearBest_3D_Printer_Deals
Also if you looking for a crazy affordable 5 Axis (yes you read that correctly) CNC, then check these out: http://diy3dtech.com/affordable-5-axis-3040-cnc/
One of the handiest tools as a maker I have is the CO2 laser as they are VERY affordable, check these out for yourself: http://diy3dtech.com/purchase-laser/
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Follow us on Instagram:
https://www.instagram.com/diy3dtech/ to what we are up too as we always have something cooking in the shop!
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3DTech Shop Talk - Affordable Industrial USB Camera!](https://i.ytimg.com/vi/6PZP_vPelqg/mqdefault.jpg)
![Ender 3 Modifications - Precision Z Axis Support!
Since Creality was running a special on the Ender 3s I purchased a number to refresh our print farm here at DIY3DTech and with this converted to them direct drive extrusion using this kit (see more here: https://amzn.to/2DsqPuI ). Because the Ender 3 has only one Z-Axis and we are adding weight to the moving hotend with motor and extruder we wanted to provide additional support to the Z-Axis lead screw. Now there are a lot of Z-Axis bearing based retainers out there however all of the ones I have used in the past where fixed and designed to fit the creators machine. Now these would fit in general other machines, however we want one where we could adjust the fit in a precision way so we designed this one!
Here we use two common 20mm bed leveling springs (see more here: https://amzn.to/31FdDKK ) cinched with two (2) 25mm long M3 bolts (see more here: https://amzn.to/31zMh8V ). Worth note is the design has modeled threads or you could use inserts (see more here: https://amzn.to/2DrT3pp ) for a more secure fit. The bearing is a common 608ZZ skate bearing (see more here: https://amzn.to/31y8Ivj) so nothing fancy. Note, that the base bracket mounts to the 20x40 upright via two M5 (important they MUST be hex / cap heads and NOT button head).
**Warning!** the M3s are spring load and if not printed correctly could come fly out so use at your own risk! To avoid this, we suggest inserts (see more here: https://amzn.to/2DrT3pp ).
**Note:** While this was designed for the Ender 3, it should also work with most other printers which uses 20x40 extrusion.
Direct Drive Kit: https://amzn.to/2DsqPuI
608ZZ Bearing: https://amzn.to/31y8Ivj
M3 Inserts: https://amzn.to/2DrT3pp
M3 x 25 Bolts: https://amzn.to/31zMh8V
M5 T-Nets: https://amzn.to/31BvgLx
M5 x 8mm Bolts: https://amzn.to/3fMAKrU
Bed Springs (20mm): https://amzn.to/31FdDKK
The STLs and Fusion 360 file can be found here: https://www.thingiverse.com/thing:4565977
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Ender 3 Modifications - Precision Z Axis Support!](https://i.ytimg.com/vi/6jVyAHfa_iU/mqdefault.jpg)
![Design Talk - 3D Printing Solves Home Automation Problem!
In this episode, we will be looking at a bracket we designed for use with a Z-Wave Garage Door sensor (see more here: https://amzn.to/2VxdPtz ) for use with my Hubitate Hub. As we needed it to trigger when just one panel was lifted.
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Design Talk - 3D Printing Solves Home Automation Problem!](https://i.ytimg.com/vi/6q9odp0GPZo/mqdefault.jpg)


![eBay K40 CO2 Laser - Why it is Important to use Distilled Water!
In this episode, we will be
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech eBay K40 CO2 Laser - Why it is Important to use Distilled Water!](https://i.ytimg.com/vi/8l4m3yuyqc8/mqdefault.jpg)
![MonoPriceMini Delta - Rambling About Why I bought it!
In this episode, we will be be talking about the new MonoPriceMini-Delta printer I just got (see more here: http://diy3dtech.com/monopricemini_delta ) as I have been printing for years and some of my existing farm is simply wearing out! So it was time for something new and I have owned a delta for a while and think because of its nature. It is better at detail then a cartesian 3d printer, yet I didnt want to break the bank (as can also do that too) so I turned again to the MonoPriceMini line as my orignal MP-Mini V1 is still running strong. Now dont get me wrong, I did my home work on this printer so I know there are some warts like the 5amp power supply, however nothing which can not be over come and the reason I made this video. So let jump into it and dicuss this little marvel!
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Follow us on Instagram:
https://www.instagram.com/diy3dtech/ to what we are up too as we always have something cooking in the shop!
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech MonoPriceMini Delta - Rambling About Why I bought it!](https://i.ytimg.com/vi/8xdseBRVeb8/mqdefault.jpg)


![Design Talk - This 3D Printed Saved Me a TON of Money!
I have always wanted a studio camera stand (see more here: https://amzn.to/2KOSnx5 ) however never wanted to pay the crazy money for one. Then I came up with the idea, why dont I simply buy a projector stand (see more here: http://on-photography.pictures/projector_stand ) and design a 3/8 inch style mounting head for a robust ball head (see more here: http://on-photography.pictures/heavy_duty_ballhead) and make my own for pennies on the dollar! Well that is what I did and it works great!
Note, the ballhead listed here has protruding base so I designed a rounded version for that one and also a flat version for other types so either way your covered! Here are a couple other accessories I found useful:
15mm Rail System: http://on-photography.pictures/Neewer_15mm_Rail_System
Affordable Ring Light: http://on-photography.pictures/ring_light
Affordable 4K Still/Video camera: http://on-photography.pictures/YI_M1_4K_Camera
As i also designed an mount for the ring-light to 15mm rail system which you can see here on Thingiverse: https://www.thingiverse.com/thing:3558762 as well as I will be adding to this collection with things as related I have also uploaded an action camera to ring-light mount which you can see here: https://www.thingiverse.com/thing:3563074
Thingiverse STL Link: https://www.thingiverse.com/thing:3574606
Looking for the best deals on 3D Printers or maybe just want to see what new, this link is for you: http://diy3dtech.com/Current_GearBest_3D_Printer_Deals
Major Favor: if you make one of these please post the Make and share it with the community :-) .
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Follow us on Instagram:
https://www.instagram.com/diy3dtech/ to what we are up too as we always have something cooking in the shop!
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com Design Talk - This 3D Printed Saved Me a TON of Money!](https://i.ytimg.com/vi/9lAdjkneAfU/mqdefault.jpg)
![Shop Talk - My Secrets to Printing Super Strong Parts!
In this episode, I will be sharing with you my secrets to printing really strong parts! As I am prototyping a new motion control system, I needed some really strong mounts to support the geared stepper motors (see more here: http://diy3dtech.com/geared_nema17_stepper_518 ) so decided it was to do a video on the topic and share how I do and see if you guys have additional suggestions!
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Follow us on Instagram:
https://www.instagram.com/diy3dtech/ to what we are up too as we always have something cooking in the shop!
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech #RadioTech Shop Talk - My Secrets to Printing Super Strong Parts!](https://i.ytimg.com/vi/9tRoKTxCep8/mqdefault.jpg)