Uploaded April 2013 | Updated November 2026, 1 day ago
I'm reloading some of my old videos after I do re-edits because the music police marked a lot of them, "Video blocked in some countries." as a result of my music choices.
Please bear in mind that at the time I was just learning how to make videos. Plus the camera I used then sometimes made my breathing sound very much like Darth Vader.
Thanks for watching my videos,
Hiram
Easy Trangia Potstand "Nailed"
Originally uploaded: May 11, 2010
Original text:
In this video I show how I came up with an easy to make pot stand (it can't get much easier) for a small Trangia burner. Turned out to be a variation on another idea I had but had just kind of "fell" into place. Might call the potstand a "Eureka" pot stand.
Note: I see now that SpeciAngler had the same idea using wires instead of nails. Wish I had seen his video before. I almost drilled a perfectly good Trangia for no reason. Here is a link to his video:
youtube.com/watch?v=699iapslSls
Lab0126
Title: Easy Trangia Potstand "Nailed"
Room temp: 54°
Humidity: 69%
Weather condition: Cloudy
Burner:Trangia - small
Stove/Pot stand:3 - 16d nails (3 1/2" long)
Pot: Standard #1
Fuel: Denatured Alcohol (Ace)
Amount of fuel: NA
Amount of water: 2 cup(s)
Water temp at start: 58°
Time to boil : 5 minutes 59 seconds
Time to run-out: NA
Water temp at run-out: NA
NA = Not Applicable / Not Available
I'm reloading some of my old videos after I do re-edits because the music police marked a lot of them, "Video blocked in some countries." as a result of my music choices.
Please bear in mind that at the time I was just learning how to make videos. Plus the camera I used then sometimes made my breathing sound very much like Darth Vader.
Thanks for watching my videos,
Hiram
Easy Trangia Potstand "Nailed"
Originally uploaded: May 11, 2010
Original text:
In this video I show how I came up with an easy to make pot stand (it can't get much easier) for a small Trangia burner. Turned out to be a variation on another idea I had but had just kind of "fell" into place. Might call the potstand a "Eureka" pot stand.
Note: I see now that SpeciAngler had the same idea using wires instead of nails. Wish I had seen his video before. I almost drilled a perfectly good Trangia for no reason. Here is a link to his video:
youtube.com/watch?v=699iapslSls
Lab0126
Title: Easy Trangia Potstand "Nailed"
Room temp: 54°
Humidity: 69%
Weather condition: Cloudy
Burner:Trangia - small
Stove/Pot stand:3 - 16d nails (3 1/2" long)
Pot: Standard #1
Fuel: Denatured Alcohol (Ace)
Amount of fuel: NA
Amount of water: 2 cup(s)
Water temp at start: 58°
Time to boil : 5 minutes 59 seconds
Time to run-out: NA
Water temp at run-out: NA
NA = Not Applicable / Not Available










