Bracer Jack | Easy Realistic Ocean in 3DS Max [Tutorial] @BracerJack | Uploaded April 2015 | Updated October 2024, 5 days ago.
Easily create realistic ocean in 3DS Max !
Hope you will find this useful :D
Transcript:
Step 1:
Drag out a high segment plane.
You can also set it after you drag it out, it doesn't matter.
Anything around 300 should be fine, but it really depends on the size of your scene, just make it as dense as possible for your need.
Step 2:
Apply a noise modifier.
Check the Fractal checkbox.
Adjust the Z strength to see the waves.
Adjust the Scale so that you are generally getting big waves, not the small ones, we will handle that later.
Don't worry about matching the numbers here, it all depends on the scale of your scene, the only thing you have to focus on is to make sure you are getting the big waves.
Adjust and Set animation key frames for the phase and refine it further with the frequency, you do not need to keyframe the frequency.
You can also animate the Gizmo to give the waves a sense of direction but that is not exactly required.
Step 3:
Apply a Push Modifier and assign a negative value to it.
The value for the push modifier is up to you, just make sure that you are getting those sharp ridges you are seeing here.
You will see some polygon penetration along the sharp ridges, that's fine, apply a relax modifier and set the relax value to 1.
If the polygon penetration are still too visible, go back to the push modifier and make the value less extreme.
This is what you are suppose to be getting by now.
Step 4:
Add one last noise modifier, this is where we concentrate on the smaller waves within the big waves we have already created.
Adjust the scale and Z strength accordingly, remember, small waves.
Now Adjust and Set animation key frames for the phase and refine it further with the frequency, you do not need to keyframe the frequency.
Step 5:
Apply a normal material, it doesn't matter what renderer you use because the geometry is already convincing enough.
Make that material really shiny and apply it to the plane.
Place a directional light such that it is shining from behind, click render and enjoy your CG waters.
Hope you find this useful :)
Support me by reading my books !
===============================================================
Humpty Dumpty God
Google Play eBook:
play.google.com/store/books/details?id=I-_cDwAAQBAJ
Kindle eBook:
amazon.com/dp/B0875KWW4Z
Paperback:
amazon.com/dp/B087647N67
===============================================================
===============================================================
Book 1 :: God Guardian: The Life Review Simulation
Google Play eBook:
play.google.com/store/books/details?id=IxnRDwAAQBAJ
Kindle eBook:
amazon.com/dp/B07SGZLMK9
Paperback:
amazon.com/dp/1070820237
===============================================================
===============================================================
Book 2 :: God Guardian: Incarnation Troll
Google Play eBook:
play.google.com/store/books/details?id=RxnRDwAAQBAJ
Kindle eBook:
amazon.com/dp/B07SJ8TLV5
Paperback:
amazon.com/dp/1070940291
===============================================================
===============================================================
Book 3 :: God Guardian: Perpetual Slaves
Google Play eBook:
play.google.com/store/books/details?id=aRnRDwAAQBAJ
Kindle eBook:
amazon.com/dp/B084TJ6JKN
Paperback:
amazon.com/dp/B084QKYCML
===============================================================
Please support my Patreon:
patreon.com/BracerJack
Paypal Donation:
bracercom@hotmail.com
Bitcoin Address Donation:
1698RW9rSJUXeSSbyNaQY7aNNbxQkLtjs5
===============================================================
Easily create realistic ocean in 3DS Max !
Hope you will find this useful :D
Transcript:
Step 1:
Drag out a high segment plane.
You can also set it after you drag it out, it doesn't matter.
Anything around 300 should be fine, but it really depends on the size of your scene, just make it as dense as possible for your need.
Step 2:
Apply a noise modifier.
Check the Fractal checkbox.
Adjust the Z strength to see the waves.
Adjust the Scale so that you are generally getting big waves, not the small ones, we will handle that later.
Don't worry about matching the numbers here, it all depends on the scale of your scene, the only thing you have to focus on is to make sure you are getting the big waves.
Adjust and Set animation key frames for the phase and refine it further with the frequency, you do not need to keyframe the frequency.
You can also animate the Gizmo to give the waves a sense of direction but that is not exactly required.
Step 3:
Apply a Push Modifier and assign a negative value to it.
The value for the push modifier is up to you, just make sure that you are getting those sharp ridges you are seeing here.
You will see some polygon penetration along the sharp ridges, that's fine, apply a relax modifier and set the relax value to 1.
If the polygon penetration are still too visible, go back to the push modifier and make the value less extreme.
This is what you are suppose to be getting by now.
Step 4:
Add one last noise modifier, this is where we concentrate on the smaller waves within the big waves we have already created.
Adjust the scale and Z strength accordingly, remember, small waves.
Now Adjust and Set animation key frames for the phase and refine it further with the frequency, you do not need to keyframe the frequency.
Step 5:
Apply a normal material, it doesn't matter what renderer you use because the geometry is already convincing enough.
Make that material really shiny and apply it to the plane.
Place a directional light such that it is shining from behind, click render and enjoy your CG waters.
Hope you find this useful :)
Support me by reading my books !
===============================================================
Humpty Dumpty God
Google Play eBook:
play.google.com/store/books/details?id=I-_cDwAAQBAJ
Kindle eBook:
amazon.com/dp/B0875KWW4Z
Paperback:
amazon.com/dp/B087647N67
===============================================================
===============================================================
Book 1 :: God Guardian: The Life Review Simulation
Google Play eBook:
play.google.com/store/books/details?id=IxnRDwAAQBAJ
Kindle eBook:
amazon.com/dp/B07SGZLMK9
Paperback:
amazon.com/dp/1070820237
===============================================================
===============================================================
Book 2 :: God Guardian: Incarnation Troll
Google Play eBook:
play.google.com/store/books/details?id=RxnRDwAAQBAJ
Kindle eBook:
amazon.com/dp/B07SJ8TLV5
Paperback:
amazon.com/dp/1070940291
===============================================================
===============================================================
Book 3 :: God Guardian: Perpetual Slaves
Google Play eBook:
play.google.com/store/books/details?id=aRnRDwAAQBAJ
Kindle eBook:
amazon.com/dp/B084TJ6JKN
Paperback:
amazon.com/dp/B084QKYCML
===============================================================
Please support my Patreon:
patreon.com/BracerJack
Paypal Donation:
bracercom@hotmail.com
Bitcoin Address Donation:
1698RW9rSJUXeSSbyNaQY7aNNbxQkLtjs5
===============================================================
![Easy Realistic Ocean in 3DS Max [Tutorial]](https://i.ytimg.com/vi/aWwepDs4eeU/hqdefault.jpg "Easy Realistic Ocean in 3DS Max [Tutorial]
Easily create realistic ocean in 3DS Max !
Hope you will find this useful :D
Transcript:
Step 1:
Drag out a high segment plane.
You can also set it after you drag it out, it doesnt matter.
Anything around 300 should be fine, but it really depends on the size of your scene, just make it as dense as possible for your need.
Step 2:
Apply a noise modifier.
Check the Fractal checkbox.
Adjust the Z strength to see the waves.
Adjust the Scale so that you are generally getting big waves, not the small ones, we will handle that later.
Dont worry about matching the numbers here, it all depends on the scale of your scene, the only thing you have to focus on is to make sure you are getting the big waves.
Adjust and Set animation key frames for the phase and refine it further with the frequency, you do not need to keyframe the frequency.
You can also animate the Gizmo to give the waves a sense of direction but that is not exactly required.
Step 3:
Apply a Push Modifier and assign a negative value to it.
The value for the push modifier is up to you, just make sure that you are getting those sharp ridges you are seeing here.
You will see some polygon penetration along the sharp ridges, thats fine, apply a relax modifier and set the relax value to 1.
If the polygon penetration are still too visible, go back to the push modifier and make the value less extreme.
This is what you are suppose to be getting by now.
Step 4:
Add one last noise modifier, this is where we concentrate on the smaller waves within the big waves we have already created.
Adjust the scale and Z strength accordingly, remember, small waves.
Now Adjust and Set animation key frames for the phase and refine it further with the frequency, you do not need to keyframe the frequency.
Step 5:
Apply a normal material, it doesnt matter what renderer you use because the geometry is already convincing enough.
Make that material really shiny and apply it to the plane.
Place a directional light such that it is shining from behind, click render and enjoy your CG waters.
Hope you find this useful :)
Support me by reading my books !
Humpty Dumpty God
Google Play eBook:
https://play.google.com/store/books/details?id=I cDwAAQBAJ
Kindle eBook:
https://www.amazon.com/dp/B0875KWW4Z
Paperback:
https://www.amazon.com/dp/B087647N67
Book 1 :: God Guardian: The Life Review Simulation
Google Play eBook:
https://play.google.com/store/books/details?id=IxnRDwAAQBAJ
Kindle eBook:
https://www.amazon.com/dp/B07SGZLMK9
Paperback:
https://www.amazon.com/dp/1070820237
Book 2 :: God Guardian: Incarnation Troll
Google Play eBook:
https://play.google.com/store/books/details?id=RxnRDwAAQBAJ
Kindle eBook:
https://www.amazon.com/dp/B07SJ8TLV5
Paperback:
https://www.amazon.com/dp/1070940291
Book 3 :: God Guardian: Perpetual Slaves
Google Play eBook:
https://play.google.com/store/books/details?id=aRnRDwAAQBAJ
Kindle eBook:
https://www.amazon.com/dp/B084TJ6JKN
Paperback:
https://www.amazon.com/dp/B084QKYCML
Please support my Patreon:
https://www.patreon.com/BracerJack
Paypal Donation:
bracercom@hotmail.com
Bitcoin Address Donation:
1698RW9rSJUXeSSbyNaQY7aNNbxQkLtjs5")
