Uploaded October 2026 | Updated November 2026, 8 hours ago
You asked, I (finally!) answered! I think this method is the easiest, even if you only want to use one color.
HOW TO MAKE A LOGO MORE THAN ONE COLOR IN
Bambu Studio (Orca slicer):
0. Put your desired object into the slicer.
1. Put .SVG logo into slicer (drag and drop),
(rotate, scale orientation as needed).
2. MERGE .SVG logo with object.
3. Select only the parts that make the .SVG logo.
4. MOVE .SVG parts to desired area
(and scale, etc. as needed).
5. Select individual parts of .SVG and
change color using the "process" settings menu
(DO NOT use the color painting feature).
3D-Fuel is my favorite PLA+ for durability and practical prints: 3dfuel.com/RCWITHADAM use code RCWITHADAM for 10% off.
🧠🛠️🛫 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at rcwithadam.com
Want to support RCwithAdam? ↴
KO-FI: ko-fi.com/rcwithadam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
**DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!**
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam
You asked, I (finally!) answered! I think this method is the easiest, even if you only want to use one color.
HOW TO MAKE A LOGO MORE THAN ONE COLOR IN
Bambu Studio (Orca slicer):
0. Put your desired object into the slicer.
1. Put .SVG logo into slicer (drag and drop),
(rotate, scale orientation as needed).
2. MERGE .SVG logo with object.
3. Select only the parts that make the .SVG logo.
4. MOVE .SVG parts to desired area
(and scale, etc. as needed).
5. Select individual parts of .SVG and
change color using the "process" settings menu
(DO NOT use the color painting feature).
3D-Fuel is my favorite PLA+ for durability and practical prints: 3dfuel.com/RCWITHADAM use code RCWITHADAM for 10% off.
🧠🛠️🛫 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at rcwithadam.com
Want to support RCwithAdam? ↴
KO-FI: ko-fi.com/rcwithadam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
**DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!**
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam










