Uploaded December 2025 | Updated November 2026, 4 days ago
This animation of the DynaNite® staple for Akin osteotomy demonstrates how the low-profile (1.0 mm) DynaNite staple sits flush to the cortical surface of the proximal phalanx. It further highlights the DynaNite drill guide "windows" that allow for easier insertion of the DynaNite staple.
This video provides a full step‑by‑step walkthrough of how to perform an Akin Osteotomy using the DynaNite® staple system, a reliable and low‑profile method of stabilizing the proximal phalanx during hallux valgus correction.
The procedure begins with a horizontally oriented linear incision over the proximal phalanx of the great toe, allowing direct exposure to the osteotomy site. A saw is then used to create a precise closing wedge osteotomy while preserving the lateral cortex, which is an important feature for maintaining inherent stability during correction.
Once the wedge is removed, the DynaNite® staple sizing guide is used to ensure proper implant selection. The system’s inserter handle is turned clockwise to open the DynaNite® staple legs from their inward resting position to a parallel stance, preparing the implant for insertion. The drill guide is positioned across the osteotomy site and stabilized against the cortical surface. A 1.6 mm drill bit, laser‑marked for accurate depth control, is used to drill the first hole proximally. Surgeons may insert an alignment pin to maintain orientation before drilling the second distal hole.
After removing the alignment pins, the drill guide remains firmly held in place to ensure that the drill holes line up with the implant legs. Using the guide windows, the DynaNite® staple legs are inserted simultaneously into their corresponding drill channels. The guide is then removed, and the inserter is used to advance the staple legs until the staple rests against the bone surface. The inserter knob is turned counterclockwise to release tension between the device and the inserter, and the instrument is slid away from the staple.
A DynaNite® tamp is then used to fully seat the staple so it lies flush against the cortical surface. This is one of the hallmarks of the system—its low‑profile design that minimizes soft‑tissue irritation and maximizes postoperative comfort. Once the staple is fully seated and the correction confirmed, the wound is closed and a compressive dressing is applied to protect the osteotomy and promote early healing.
This video is ideal for surgeons refining their technique for hallux valgus correction, as well as trainees learning how to perform a closing wedge osteotomy efficiently and safely. The DynaNite® system offers reliable fixation with simple instrumentation, making it a strong option for modern forefoot reconstruction.
👇 Helpful Arthrex Reference Links:
Arthrex Foot & Ankle Osteotomy Fixation Systems: arthrex.com/foot-ankle
Learn more: arthrex.info/4pOqYKp
👍 Like this video if you want more surgical step‑by‑steps
💬 Comment with your questions about DynaNite® staples or osteotomy techniques
🔔 Subscribe for more forefoot and osteotomy repair tutorials
Arthrex is a global leader in orthopedic surgical innovation, dedicated to advancing minimally invasive techniques and medical education. Our mission is to help surgeons treat their patients better by providing cutting-edge products, expert training, and comprehensive resources for orthopedic procedures, including sports medicine, joint preservation, and trauma care.
Stay Connected: 👍 Subscribe to our channel for the latest in orthopedic surgical techniques and product updates.
📱 Follow Arthrex on:
LinkedIn: / linkedin.com/company/arthrex
Facebook: / facebook.com/Arthrex
Instagram: / instagram.com/arthrexmeded
X: https://x.com/arthrex
This animation of the DynaNite® staple for Akin osteotomy demonstrates how the low-profile (1.0 mm) DynaNite staple sits flush to the cortical surface of the proximal phalanx. It further highlights the DynaNite drill guide "windows" that allow for easier insertion of the DynaNite staple.
This video provides a full step‑by‑step walkthrough of how to perform an Akin Osteotomy using the DynaNite® staple system, a reliable and low‑profile method of stabilizing the proximal phalanx during hallux valgus correction.
The procedure begins with a horizontally oriented linear incision over the proximal phalanx of the great toe, allowing direct exposure to the osteotomy site. A saw is then used to create a precise closing wedge osteotomy while preserving the lateral cortex, which is an important feature for maintaining inherent stability during correction.
Once the wedge is removed, the DynaNite® staple sizing guide is used to ensure proper implant selection. The system’s inserter handle is turned clockwise to open the DynaNite® staple legs from their inward resting position to a parallel stance, preparing the implant for insertion. The drill guide is positioned across the osteotomy site and stabilized against the cortical surface. A 1.6 mm drill bit, laser‑marked for accurate depth control, is used to drill the first hole proximally. Surgeons may insert an alignment pin to maintain orientation before drilling the second distal hole.
After removing the alignment pins, the drill guide remains firmly held in place to ensure that the drill holes line up with the implant legs. Using the guide windows, the DynaNite® staple legs are inserted simultaneously into their corresponding drill channels. The guide is then removed, and the inserter is used to advance the staple legs until the staple rests against the bone surface. The inserter knob is turned counterclockwise to release tension between the device and the inserter, and the instrument is slid away from the staple.
A DynaNite® tamp is then used to fully seat the staple so it lies flush against the cortical surface. This is one of the hallmarks of the system—its low‑profile design that minimizes soft‑tissue irritation and maximizes postoperative comfort. Once the staple is fully seated and the correction confirmed, the wound is closed and a compressive dressing is applied to protect the osteotomy and promote early healing.
This video is ideal for surgeons refining their technique for hallux valgus correction, as well as trainees learning how to perform a closing wedge osteotomy efficiently and safely. The DynaNite® system offers reliable fixation with simple instrumentation, making it a strong option for modern forefoot reconstruction.
👇 Helpful Arthrex Reference Links:
Arthrex Foot & Ankle Osteotomy Fixation Systems: arthrex.com/foot-ankle
Learn more: arthrex.info/4pOqYKp
👍 Like this video if you want more surgical step‑by‑steps
💬 Comment with your questions about DynaNite® staples or osteotomy techniques
🔔 Subscribe for more forefoot and osteotomy repair tutorials
Arthrex is a global leader in orthopedic surgical innovation, dedicated to advancing minimally invasive techniques and medical education. Our mission is to help surgeons treat their patients better by providing cutting-edge products, expert training, and comprehensive resources for orthopedic procedures, including sports medicine, joint preservation, and trauma care.
Stay Connected: 👍 Subscribe to our channel for the latest in orthopedic surgical techniques and product updates.
📱 Follow Arthrex on:
LinkedIn: / linkedin.com/company/arthrex
Facebook: / facebook.com/Arthrex
Instagram: / instagram.com/arthrexmeded
X: https://x.com/arthrex



![Arthrex Spine
Welcome to the new Arthrex Spine website, where you can explore:
- Endoscopic spine products and procedures
- Evidence that enables confident practice integration
- A curriculum pathway that advances patient care
- Medical education courses
Arthrex has redefined spine care by expanding its legacy of orthopedic innovation into ultra-minimally invasive, motion-preserving solutions. With a surgeon-centered approach and advanced endoscopic techniques, our outcome-focused systems are engineered to reduce tissue disruption,[1] accelerate recovery,[2] and restore function.[3]
Backed by more than 40 years of leadership in sports medicine and surgical education, Arthrex Spine bridges the gap between conservative treatment and traditional open surgery through innovative techniques and orthobiologic products designed for faster recovery and lasting stability, setting a new benchmark in ultra-minimally invasive spine surgery.
Learn more: https://www.spine.arthrex.com/
Page PS, et al. Cureus. 2022;14(5):e25202.
Polikandriotis JA, et al. J Orthop. 2013;10(1):13-16.
Lewandrowski KU, et al. J Spine Surg. 2020;6(Suppl 1):S100-S115. Arthrex Spine](https://i.ytimg.com/vi/8zM7k5tKKEA/mqdefault.jpg)






