Uploaded August 2021 | Updated November 2026, 11 hours ago
This is the accompanying video of our RAL paper titled "Dynamic End Effector Tracking with an Omnidirectional Parallel Aerial Manipulator"
ieeexplore.ieee.org/document/9507086
Abstract:
To address the challenge of precise, dynamic and versatile aerial manipulation, we present an aerial manipulation platform consisting of a parallel 3-DOF manipulator mounted to an omnidirectional tilt-rotor aerial vehicle. The general modeling of a parallel manipulator on an omnidirectional floating base is presented, which motivates the optimization and detailed design of the aerial manipulator parameters and components. Inverse kinematic control of the manipulator is coupled to the omnidirectional base pose controller with a dynamic compensation term, going beyond common decoupled approaches. This presents a baseline for the control of redundant omnidirectional aerial manipulators. Experimental flights show the advantages of an active manipulator vs. a fixed arm for disturbance rejection and end effector tracking performance, as well as the practical limitations of the dynamic compensation term for fast end
effector trajectories. The results motivate future studies for precise and dynamic aerial manipulation.
Reference:
Karen Bodie, Marco Tognon, and Roland Siegwart "Dynamic End Effector Tracking with an Omnidirectional Parallel Aerial Manipulator" IEEE Robotics and Automation Letters, 2021
PDF: https://www.research-collection.ethz.ch/bitstream/handle/20.500.11850/499753/main.pdf?sequence=1&isAllowed=y
Affiliations:
K. Bodie, M. Tognon, and R. Siegwart are with the Autonomous Systems
Lab, ETH Zurich, 8092 Switzerland
This is the accompanying video of our RAL paper titled "Dynamic End Effector Tracking with an Omnidirectional Parallel Aerial Manipulator"
ieeexplore.ieee.org/document/9507086
Abstract:
To address the challenge of precise, dynamic and versatile aerial manipulation, we present an aerial manipulation platform consisting of a parallel 3-DOF manipulator mounted to an omnidirectional tilt-rotor aerial vehicle. The general modeling of a parallel manipulator on an omnidirectional floating base is presented, which motivates the optimization and detailed design of the aerial manipulator parameters and components. Inverse kinematic control of the manipulator is coupled to the omnidirectional base pose controller with a dynamic compensation term, going beyond common decoupled approaches. This presents a baseline for the control of redundant omnidirectional aerial manipulators. Experimental flights show the advantages of an active manipulator vs. a fixed arm for disturbance rejection and end effector tracking performance, as well as the practical limitations of the dynamic compensation term for fast end
effector trajectories. The results motivate future studies for precise and dynamic aerial manipulation.
Reference:
Karen Bodie, Marco Tognon, and Roland Siegwart "Dynamic End Effector Tracking with an Omnidirectional Parallel Aerial Manipulator" IEEE Robotics and Automation Letters, 2021
PDF: https://www.research-collection.ethz.ch/bitstream/handle/20.500.11850/499753/main.pdf?sequence=1&isAllowed=y
Affiliations:
K. Bodie, M. Tognon, and R. Siegwart are with the Autonomous Systems
Lab, ETH Zurich, 8092 Switzerland




![Aerial Manipulation with an Omnidirectional Flying Platform
This video showcases our current research to address the challenges of aerial manipulation with omnidirectional flying robots at ETH Zurichs Autonomous systems lab. This topic connects several different topics of active research at our institute, including design and control of omnidirectional aerial manipulators, planning frameworks, and grasp detection.
For further details on the content of this video, links to the related research papers are listed below.
Paper References
[1] Allenspach, M., Bodie, K., Brunner, M., Rinsoz, L., Taylor, Z., Kamel, M., Siegwart, R. and Nieto, J., 2020. Design and optimal control of a tiltrotor micro-aerial vehicle for efficient omnidirectional flight., The International Journal of Robotics Research, 39(10-11), pp.1305-1325.
link: https://arxiv.org/pdf/2003.09512.pdf
[2] Zhang, W., Brunner, M., Ott, L., Kamel, M., Siegwart, R. and Nieto, J., 2020. Learning dynamics for improving control of overactuated flying systems., IEEE Robotics and Automation Letters, 5(4), pp.5283-5290.
link: https://arxiv.org/pdf/2006.13153.pdf
[3] Zhang, W., Ott, L., Tognon, M., Siegwart, R. and Nieto, J., 2021. Active Model Learning using Informative Trajectories for Improved Closed-Loop Control on Real Robots. arXiv preprint arXiv:2101.08100.
link: https://arxiv.org/pdf/2101.08100.pdf
[4] Bodie, K., Brunner, M., Pantic, M., Walser, S., Pfändler, P., Angst, U., Siegwart, R. and Nieto, J., 2019. An omnidirectional aerial manipulation platform for contact-based inspection., Robotics: Science and System XV, 15.
link: https://arxiv.org/pdf/1905.03502.pdf
[5] Bodie, K., Tognon, M. and Siegwart, R. Dynamic End Effector Tracking with an Omnidirectional Parallel Aerial Manipulator. (under review, link to follow)
[6] Breyer, M., Chung, J.J., Ott, L., Siegwart, R. and Nieto, J., 2021. Volumetric Grasping Network: Real-time 6 DOF Grasp Detection in Clutter., arXiv preprint arXiv:2101.01132.
link: https://arxiv.org/pdf/2101.01132.pdf
[7] Pantic, M., Ott, L., Cadena, C., Siegwart, R. and Nieto, J., 2021. Mesh Manifold based Riemannian Motion Planning for Omnidirectional Micro Aerial Vehicles., IEEE Robotics and Automation Letters, 6(3), pp.4790-4797.
link: https://arxiv.org/pdf/2102.10313.pdf
[8] Allenspach, M., Lawrance, N. , Tognon, M. and Siegwart, R. 6 DOF Teleoperation of an Omnidirectional Aerial Vehicle. (under review, link to follow) Aerial Manipulation with an Omnidirectional Flying Platform](https://i.ytimg.com/vi/njlyQnRwNLs/mqdefault.jpg)




![Visual-inertial teach and repeat powered by Google Tango
Visual-Inertial Teach and Repeat for Aerial Inspection
M Fehr, T Schneider, M Dymczyk, J Sturm, R Siegwart
Arxiv: https://arxiv.org/abs/1803.09650
Submitted to:
Workshop on Aerial Robotic Inspection and Maintenance
International Conference on Robotics and Automation 2018
Related Publications:
Real-time visual-inertial mapping, re-localization and planning onboard MAVs in unknown environments
M Burri, H Oleynikova, MW Achtelik, R Siegwart
A robust and modular multi-sensor fusion approach applied to mav navigation
S Lynen, MW Achtelik, S Weiss, M Chli, R Siegwart
Linear vs Nonlinear MPC for Trajectory Tracking Applied to Rotary Wing Micro Aerial Vehicles
M Kamel, M Burri, R Siegwart
Related Videos:
https://www.youtube.com/watch?v=tuUMwcTJx8s
https://www.youtube.com/watch?v=Ot76i9p2ZZo
https://www.youtube.com/watch?v=lrGSwAPzMOQ
Contact:
marius.fehr[at]mavt.ethz.ch
thomas.schneider[at]mavt.ethz.ch Visual-inertial teach and repeat powered by Google Tango](https://i.ytimg.com/vi/pDlQXsOrgI4/mqdefault.jpg)
