Uploaded July 2018 | Updated September 2026, 2 weeks ago
Duet Wifi Setup 3ddistributed.com/duet-wifi
The Duet 2 Wifi is an advanced 32 bit electronics for the control of 3D printers and other CNC machines.
We're now using the Duet 3 Mainboard 6HC on the Workhorse Printer. I'm still documenting all the steps but this is what I have so far.
3ddistributed.com/duet-wifi/duet-3-wiring
If you haven't wired a 3d printer before I suggest reading over the Duet3D website to gather more information.
It has the same features as the Duet 2 Ethernet other than providing a WiFi connectivity rather than ethernet, full feature description is available in our documentation , in summary:
Powerful 32 Bit Processor
Dedicated Wifi module
Super quiet TMC2660 stepper drivers, up to 256 microstepping.
High speed SD card and support for a second SD external card if required.
Dual extruders on the main board, up to 5 more extruders on the expansion board.
High Power rating: Each stepper driver is capable of 2.8A motor current, currently limited in software to 2.4A. The bed heater channel is specifically designed for high current (18A).
Connect via PC, tablet or smartphone on the same network to the on board web interface.
Setup your printer and update the firmware through the web interface.
All common 3D printer geometries are supported
Expandable up to 7 extruders with Firmware support for mixing nozzles and remapping axes to use high power external drivers.
Support for the PanelDue: a full colour graphic touch screen
Provided with Molex compatible plugs and crimps as well as ferrules for power and heater terminals.
The DuetWifi and DuetEthernet are the next generation of 3Dprinting electronics,designed and manufactured as a collaboration between Think3Dprint3D and Esher3D. This builds on the success of the previous generations of the Duet 3Dprinter controller and the most advanced 3Dprinting firmware: RepRapFirmware. By ordering a Duet WiFi you will be supporting both the Duet hardware development and the continued development of RepRapFirmware.
Duet Wifi Setup 3ddistributed.com/duet-wifi
The Duet 2 Wifi is an advanced 32 bit electronics for the control of 3D printers and other CNC machines.
We're now using the Duet 3 Mainboard 6HC on the Workhorse Printer. I'm still documenting all the steps but this is what I have so far.
3ddistributed.com/duet-wifi/duet-3-wiring
If you haven't wired a 3d printer before I suggest reading over the Duet3D website to gather more information.
It has the same features as the Duet 2 Ethernet other than providing a WiFi connectivity rather than ethernet, full feature description is available in our documentation , in summary:
Powerful 32 Bit Processor
Dedicated Wifi module
Super quiet TMC2660 stepper drivers, up to 256 microstepping.
High speed SD card and support for a second SD external card if required.
Dual extruders on the main board, up to 5 more extruders on the expansion board.
High Power rating: Each stepper driver is capable of 2.8A motor current, currently limited in software to 2.4A. The bed heater channel is specifically designed for high current (18A).
Connect via PC, tablet or smartphone on the same network to the on board web interface.
Setup your printer and update the firmware through the web interface.
All common 3D printer geometries are supported
Expandable up to 7 extruders with Firmware support for mixing nozzles and remapping axes to use high power external drivers.
Support for the PanelDue: a full colour graphic touch screen
Provided with Molex compatible plugs and crimps as well as ferrules for power and heater terminals.
The DuetWifi and DuetEthernet are the next generation of 3Dprinting electronics,designed and manufactured as a collaboration between Think3Dprint3D and Esher3D. This builds on the success of the previous generations of the Duet 3Dprinter controller and the most advanced 3Dprinting firmware: RepRapFirmware. By ordering a Duet WiFi you will be supporting both the Duet hardware development and the continued development of RepRapFirmware.
