Uploaded April 2019 | Updated September 2026, 12 hours ago
I'm making a drill guide a bit of plywood. Extremely handy tool for opening 90 degree holes. Also the cost is very low. After watching the video you can do according to your own drill guide.
I hope the following link will help you for dimensions: greensawdiy.com/drill-guide-making-diy-video.html
#drillguide #drillpress #greensaw
portable drill press
Tools in this video :
Angle Grinder Stand : youtu.be/QFHmRWjh9P8
Subscribe youtube.com/greensaw/?sub_confirmation=1
My website : greensawdiy.com
â€Playlists:
DIY Tools: youtube.com/watch?v=PLZFzQVHwj15gxNMWacspqqSMlWLRkiksX
Clamps: youtube.com/watch?v=zNrEcNd5gCg&list=PLZFzQVHwj15j7wGkQX4EIEzRd7-nOeO8G
Sanders : youtube.com/watch?v=tcDLvwU7ucQ&list=PLZFzQVHwj15iczFFydOxbcMt1TIWLeeMs
Wood Turning : youtube.com/playlist?list=PLZFzQVHwj15iMT5jwkc_Sp3s1ZG-AyZkL
Drilling Tools : youtube.com/playlist?list=PLZFzQVHwj15hehBh93G6gfrGH4GBZ6emP
Wood Works : youtube.com/playlist?list=PLZFzQVHwj15jUi38AgPRs6VTjK96aa-9E
Celaning : youtube.com/watch?v=ztP-uP29IeI&list=PLZFzQVHwj15icbL6VEqXyzrPR7DD5ImZm
Band Saw : youtube.com/watch?v=rz7FJ5t9SOU&list=PLZFzQVHwj15gsCAgmzixToLgOxGggRivn
I'm making a drill guide a bit of plywood. Extremely handy tool for opening 90 degree holes. Also the cost is very low. After watching the video you can do according to your own drill guide.
I hope the following link will help you for dimensions: greensawdiy.com/drill-guide-making-diy-video.html
#drillguide #drillpress #greensaw
portable drill press
Tools in this video :
Angle Grinder Stand : youtu.be/QFHmRWjh9P8
Subscribe youtube.com/greensaw/?sub_confirmation=1
My website : greensawdiy.com
â€Playlists:
DIY Tools: youtube.com/watch?v=PLZFzQVHwj15gxNMWacspqqSMlWLRkiksX
Clamps: youtube.com/watch?v=zNrEcNd5gCg&list=PLZFzQVHwj15j7wGkQX4EIEzRd7-nOeO8G
Sanders : youtube.com/watch?v=tcDLvwU7ucQ&list=PLZFzQVHwj15iczFFydOxbcMt1TIWLeeMs
Wood Turning : youtube.com/playlist?list=PLZFzQVHwj15iMT5jwkc_Sp3s1ZG-AyZkL
Drilling Tools : youtube.com/playlist?list=PLZFzQVHwj15hehBh93G6gfrGH4GBZ6emP
Wood Works : youtube.com/playlist?list=PLZFzQVHwj15jUi38AgPRs6VTjK96aa-9E
Celaning : youtube.com/watch?v=ztP-uP29IeI&list=PLZFzQVHwj15icbL6VEqXyzrPR7DD5ImZm
Band Saw : youtube.com/watch?v=rz7FJ5t9SOU&list=PLZFzQVHwj15gsCAgmzixToLgOxGggRivn
![DIY Standing Laptop Table - Adjustable, Footed, Wooden - Notebook Stand [4K]](https://i.ytimg.com/vi/Rv_ESm4z2JY/mqdefault.jpg "DIY Standing Laptop Table - Adjustable, Footed, Wooden - Notebook Stand [4K]
I have done box joint jig in my previous videos. I wanted to make a notebook stand using this jig. I used hard wood as the building material. I have the feet firmly joined. I sanded everything well and applied varnish. It turned out to be a awesome wooden laptop stand.
The table of this stand I made is movable. It can be adjusted to any angle you want. Suitable for all kinds of notebooks. I tried it for 17.3 and 13 notebooks and found it to be very useful.
I also added a small box to this notebook stand. Thus, you can put your accessories such as power supply, headphones and mouse here.
First I wanted to make a notebook stand without legs, but then I decided to make one with legs. In this way, I will be able to use my notebook comfortably while sitting on my sofa.
Would you like to make this adjustable notebook stand?
#notebookstand #diynotebookstand #woodennotebookstand #greensaw #designedbygreensaw
You can find all dimensions in the pdf document.
â€PDF (dimensions-plan) download page : http://www.greensawdiy.com/adjustable-notebook-stand.html
â€Tools/Supplies Used :
Box Joint Jig : https://youtu.be/hTOCHK6drTs
Corner Clamp Jig : https://youtu.be/c6r3FHRCHgg
Wooden Vise : https://youtu.be/kuIKfdxsh60
Quick Clamps : https://youtu.be/ZK7_ZH84Q_g
Spring Clamp : https://youtu.be/QHrzPgwZsSI
3D Printed Star Knobs : https://youtu.be/njhZLWxD8Fc
Block Plane : https://youtu.be/Fh8LmN41Y0Y
â€Subscribe https://www.youtube.com/greensaw/?sub_confirmation=1
â€My website : http://www.greensawdiy.com
â€Join : https://www.youtube.com/channel/UCFffS89D6ckU6ycxHulaNxg/join
â€Playlists:
DIY Tools: https://www.youtube.com/watch?v=PLZFzQVHwj15gxNMWacspqqSMlWLRkiksX
Clamps: https://www.youtube.com/watch?v=zNrEcNd5gCg&list=PLZFzQVHwj15j7wGkQX4EIEzRd7-nOeO8G
Sanders : https://www.youtube.com/watch?v=tcDLvwU7ucQ&list=PLZFzQVHwj15iczFFydOxbcMt1TIWLeeMs
Wood Turning : https://www.youtube.com/playlist?list=PLZFzQVHwj15iMT5jwkc_Sp3s1ZG-AyZkL
Drilling Tools : https://www.youtube.com/playlist?list=PLZFzQVHwj15hehBh93G6gfrGH4GBZ6emP
Wood Works : https://www.youtube.com/playlist?list=PLZFzQVHwj15jUi38AgPRs6VTjK96aa-9E
Celaning : https://www.youtube.com/watch?v=ztP-uP29IeI&list=PLZFzQVHwj15icbL6VEqXyzrPR7DD5ImZm
Band Saw : https://www.youtube.com/watch?v=rz7FJ5t9SOU&list=PLZFzQVHwj15gsCAgmzixToLgOxGggRivn")
![Plastic or Wood - Woodworking Marker DIY [4K]](https://i.ytimg.com/vi/UIXYWXmswxY/mqdefault.jpg "Plastic or Wood - Woodworking Marker DIY [4K]
I have one 3D printed woodworking marker that I use in my workshop. This tool has caught the attention of some of my followers. I thought I could do the same with wood. I started with a solid piece of wood. First I made it to the dimensions I wanted. I used planer and bandsaw. Then I shaped it by looking at the dimension PDF document I prepared. It is possible to use this #woodworkingmarker for 90 degree and 45 degree angles. It is also possible to make error-free markings. After you download the PDF document, you can easily do it by looking at the dimensions. I think I like the wooden one more. Which one do you prefer? The 3D printed plastic one or the wood woodworking marker?
You can find all dimensions in the pdf document.
â€PDF (dimensions-plan) download page : http://www.greensawdiy.com/woodworking-marker.html
â€Tools/Supplies Used :
Sanding Machine : https://youtu.be/lM-V20zzfjQ
Countersink Drill Bit : https://youtu.be/eVBJWfIlPWw
Spring Clamp : https://youtu.be/QHrzPgwZsSI
â€Subscribe https://www.youtube.com/greensaw/?sub_confirmation=1
â€My website : http://www.greensawdiy.com
â€Join : https://www.youtube.com/channel/UCFffS89D6ckU6ycxHulaNxg/join
â€Playlists:
DIY Tools: https://www.youtube.com/watch?v=PLZFzQVHwj15gxNMWacspqqSMlWLRkiksX
Clamps: https://www.youtube.com/watch?v=zNrEcNd5gCg&list=PLZFzQVHwj15j7wGkQX4EIEzRd7-nOeO8G
Sanders : https://www.youtube.com/watch?v=tcDLvwU7ucQ&list=PLZFzQVHwj15iczFFydOxbcMt1TIWLeeMs
Wood Turning : https://www.youtube.com/playlist?list=PLZFzQVHwj15iMT5jwkc_Sp3s1ZG-AyZkL
Drilling Tools : https://www.youtube.com/playlist?list=PLZFzQVHwj15hehBh93G6gfrGH4GBZ6emP
Wood Works : https://www.youtube.com/playlist?list=PLZFzQVHwj15jUi38AgPRs6VTjK96aa-9E
Celaning : https://www.youtube.com/watch?v=ztP-uP29IeI&list=PLZFzQVHwj15icbL6VEqXyzrPR7DD5ImZm
Band Saw : https://www.youtube.com/watch?v=rz7FJ5t9SOU&list=PLZFzQVHwj15gsCAgmzixToLgOxGggRivn")
