TheRasteri | DOOM running on a Pioneer DJ controller (XDJ-RX2) @TheRasteri | Uploaded November 2020 | Updated October 2024, 16 hours ago.
Based on work by twitter.com/G33KatWork
Instructions to get this to work :
(do not attempt this unless you're good at soldering/linux/etc)
1. Cross-compile fbDOOM for ARM - github.com/maximevince/fbDOOM
2. Put it on a USB stick alongside DOOM.WAD from the shareware release (or full version if you like)
3. Connect a 3.3v UART to port CN1002 on the main PCB (1=3.3v, 2=TXD, 3=RXD, 4=GND)
4. Get Root ( twitter.com/G33KatWork/status/1146860035085086720 )
5. kill rbp
6. run fbDOOM from the usb stick (it gets mounted in /media/usbx/sda1)
Hit me up if you want better instructions.
Based on work by twitter.com/G33KatWork
Instructions to get this to work :
(do not attempt this unless you're good at soldering/linux/etc)
1. Cross-compile fbDOOM for ARM - github.com/maximevince/fbDOOM
2. Put it on a USB stick alongside DOOM.WAD from the shareware release (or full version if you like)
3. Connect a 3.3v UART to port CN1002 on the main PCB (1=3.3v, 2=TXD, 3=RXD, 4=GND)
4. Get Root ( twitter.com/G33KatWork/status/1146860035085086720 )
5. kill rbp
6. run fbDOOM from the usb stick (it gets mounted in /media/usbx/sda1)
Hit me up if you want better instructions.