Don't Use Incorrect Spark plugs - Look What Happens! @TheRepairSpecialist

Uploaded March 2024 | Updated September 2026, 1 week ago

Craig explains that, when it comes to ignition coil damage, a little petrol lawnmower with the wrong kind of spark plug might have serious repercussions. As a vital part of the ignition system, the spark plug ignites the air-fuel mixture inside the engine's combustion chamber by producing the spark that is required.

It might not be able to produce the right spark at the right moment or with the right intensity if the wrong spark plug is placed. This imbalance may cause incomplete combustion, which could put more strain on the ignition coil and cause inconsistent engine performance and misfires.

The ignition coil is extremely sensitive to changes in spark plug specifications because it is responsible for converting the low voltage from the battery into the high voltage needed to produce the spark. In the event that the spark plug fails to meet the manufacturer's suggested parameters for the engine of the lawnmower, the ignition coil may have to work harder to make up for the variations in spark generation.

This extra stress over time may cause the ignition coil to deteriorate, which could result in overheating, insulation failure, or both. Therefore, in a tiny petrol lawnmower, it is crucial to make sure the right spark plug is installed in order to preserve the integrity and longevity of both the ignition coil and the spark plug.

Have a great day

Craig (Owner and Creator of The Repair Specialist Channel)

Dont Use Incorrect Spark plugs - Look What Happens!

Effects of Altitude on Carburetor Settings

The INCREDIBLE way the Metering System runs the Engine - Weed Eater Carburetor

How COLD Climates effect Carburetor Settings

Easily Fit the Metering Needle and Lever and Spring (Small 2 Stroke Chainsaw Carburetor)

Set Your Chainsaw Coil Gap PERFECT Every Time!

Master The Hidden LOW Screw That Controls Your Weed Eater Strimmer

$POWER STROKE on a 4 Stroke Engine! (by Craig Kirkman) Here are some interesting facts about the power stroke in small four-stroke engines: Combustion Event: The power stroke is where the actual combustion occurs. Following the compression stroke, the air-fuel mixture is ignited (in gasoline engines) or self-ignites (in diesel engines), resulting in a rapid expansion of gases that drives the piston downward. Energy Production: The energy released during combustion pushes the piston down with significant force, converting the chemical energy of the fuel into mechanical energy. This is the primary action that produces the engines power output. Pressure Peaks: During the power stroke, cylinder pressure can reach very high levels, often exceeding 1,500 psi (pounds per square inch) in small engines. This high pressure is essential for maximizing the force exerted on the piston. Crankshaft Rotation: The downward movement of the piston during the power stroke is converted into rotational motion by the crankshaft. This rotational motion ultimately powers the vehicle or machinery the engine is attached to. Duration: The power stroke occurs over a relatively short duration compared to the other strokes. The actual combustion and expansion take place in a fraction of a second, leading to a rapid change in pressure and temperature. Exhaust Valve Timing: The timing of the exhaust valve opening is critical. It needs to be carefully coordinated to allow the exhaust gases to exit the cylinder without hindering the power stroke. Poor timing can result in back-pressure, reducing overall efficiency. Turbocharging Benefits: In turbocharged engines, the power stroke can be enhanced by forcing more air into the cylinder, allowing for more fuel to be burned. This can significantly increase the power output without increasing engine size. Vibration and Noise: The explosive nature of combustion during the power stroke generates vibrations and noise. Engine design often includes dampening systems to reduce these effects, improving comfort and longevity. Fuel Quality Impact: The quality of the fuel used can affect the efficiency and smoothness of the power stroke. Higher-quality fuels can burn more completely, resulting in better performance and fewer emissions. Heat Dissipation: A significant amount of heat is generated during the power stroke, requiring effective cooling systems to prevent overheating. Proper cooling helps maintain engine integrity and performance over time. Understanding the power stroke is crucial for appreciating how small four-stroke engines generate the power necessary for various applications, from lawn mowers to generators. Have a great day Craig Kirkman (Owner and Creator of The Repair Specialist Channel)$

Chainsaw Bog and the Chainsaw Exhaust Spark Arrester