Uploaded October 2017 | Updated September 2026, 13 hours ago
Copying this key with my low-budget 3D Scanner and a cheap chinese printer (Anet A8). I used black PLA and printed with 210°C, 0.25 Nozzle size, 0.05 layer height and 30-50mm/s speed.
Next up is a DOM IX KG with an active element (ball bearing) as copy-protection. I am also locking for more exotic lock+keys to practice on.
Disclaimer: I own the locks and do not offer this as a service. I am very interested in security features, lockpicking and the impact of new technologies like 3d printing and scanning.
Copying this key with my low-budget 3D Scanner and a cheap chinese printer (Anet A8). I used black PLA and printed with 210°C, 0.25 Nozzle size, 0.05 layer height and 30-50mm/s speed.
Next up is a DOM IX KG with an active element (ball bearing) as copy-protection. I am also locking for more exotic lock+keys to practice on.
Disclaimer: I own the locks and do not offer this as a service. I am very interested in security features, lockpicking and the impact of new technologies like 3d printing and scanning.
